WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

644 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
TSB 24-21262024-05-04. Service bulletin. EQUIPMENT. This article supersedes TSB 24-2093 to address the revised software and include affected 3.5L FHEV vehicles. Some 2021-2023 F-150 vehicles equipped with a gasoline, hybrid or flex fuel engine (non-Lightning) except 2023 F-150 with 3.3L may exhibit inoperative A/C, lack of air flow, blows warm, and/or evidence of the evaporator freezing. This may be due to the software level of the PCM and heating, ventilation and air conditioning (HVAC) module.
SSM 524762024-05-03. Service bulletin. EQUIPMENT. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
OTAPU10246CHAUDF2024-04-04. Service bulletin. EQUIPMENT. Quality Improvements include: - Fix the infrequent random audio noises issue and improve the audio quality of the vehicle.
SSM 523282024-03-20. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some 2021-2024 Bronco/F-150, 2023-2024 Escape/F-Super Duty vehicles equipped with SYNC 4 may experience a concern during accessory protocol interface module (APIM) programming where the vehicle's center display screen indicates USB Error. This may be due to a lack of memory space available to perform the APIM software update. If it is a memory concern, the Ford Diagnosis and Repair System (FDRS) will provide an option to delete the voice application. Re-enter the module programming and when prompted, do not select first option - SYNC Module (APIM) Software Update, select the second option - Delete Voice Application(s) From Module. Once deleted, run the SYNC Module (APIM) Software Update as directed, this will update the software and automatically reload the voice app. If the voice delete option is not available, continue with normal diagnostics in the Workshop Manual, Section 418.
SSM 522242024-02-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY:VEHICLE CONTROLS:STEERING. Some 2021-2023 F-150 vehicles may exhibit DTC U023A:08 after reprogramming the SCCM. Do not replace or reprogram the SCCM, image processing module A (IPMA) or their components for this condition at this time. This DTC does not alert the customer, will not affect vehicle durability or vehicle operation and no additional diagnosis or service is required for this condition at this time. Engineering is currently working on a solution for this condition that will reprogram the IPMA and is expected in Q2 2024. Monitor OASIS for additional information.
TSB 23-24072024-01-05. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some 2021-2022 F-150 vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit a Pro Power Onboard Unavailable message in the vehilce center display screen with DTC B15DA:09 in the BCM. This may be due to the software level of the BCM and powertrain control module (PCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, perform the Service Procedure below to reprogram the BCM and PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
SSM 521002023-12-01. Service bulletin. BACK OVER PREVENTION:SOFTWARE; EQUIPMENT. Some 2021-2023 F-150 vehicles equipped with autowipers may exhibit an inoperative rain-sensing wipers feature, even when the feature is turned on in the Vehicle Settings menu. This may be due to the software level of the steering column control module (SCCM). To correct this condition, reprogram the SCCM using the latest software level of the Ford Diagnosis and Repair System (FDRS) located under the SW Updates tab. For claiming, use causal part 3F791 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 23-23472023-11-21. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This article supersedes TSB 23-2279 to update the Service Procedure. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a powertrain malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM). This may be due to the belt integrated starter generator (BISG). To correct this condition, follow the Service Procedure to diagnose and repair this symptom.
TSB 23-23452023-11-21. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some 2021-2023 Ford and Lincoln vehicles equipped with SYNC 4 may exhibit the navigation feature in the center display screen only displaying imperial (feet and miles) units and not being able to change to metric (meters and kilometers) units. This may be due to the software level of the SYNC module (APIM). To correct this condition, follow the Service Procedure to update the APIM to the latest software level via a coordinated flash. NOTE: The APIM software update that addresses the symptom listed in this article may have been sent via Ford Power-Up software updates delivered over-the-air (OTA) to connected vehicles that have automatic updates enabled through the center display screen. Enter the vehicle identification number (VIN) in Professional Technician System (PTS) and check the OTA Dashboard under the Connected Vehicle tab for OTA update history. If an update to the APIM has successfully completed recently and the customer is reporting the symptoms are no longer present, this article may not apply.
21G01 Re-engage2023-11-09. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Recall re-engagement email to customers who have not completed their recall. The message will provide a link to the Ford VIN recall look up tool to show the customer open recalls on their vehicle.
SSM 519722023-11-03. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some 2021-2023 F-150 vehicles equipped with an IPC with a 4.2 inch display and built with minor feature code HKRAB may experience a resetting of the trip odometer and MPG information after a key cycle. To confirm a vehicle is built with minor feature code HKRAB, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This condition may be due to the software level of the IPC. To correct this condition, reprogram the IPC to the latest software level using the Ford Diagnosis and Repair System (FDRS). Perform a brief road test after the software update to confirm the concern is no longer present. If the concern is still present, replace the IPC. For claiming, use causal part 10849 and applicable labor operations in Section 10 of the Service Labor Time Standards Manual.
SSM 519372023-10-05. Service bulletin. EQUIPMENT. Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
OTA SU4 P5 F-1502023-10-03. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE. "Software Update SU4 P5 for 2021 F-150 vehicles is now available. Quality Improvements include: - Various Apple Carplay quality improvements"
SAN-Vol1 I12023-08-16. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
SSM 518292023-08-14. Service bulletin. EQUIPMENT; VISIBILITY:REARVIEW MIRRORS/DEVICES. Some F-Super Duty and F-150 vehicles equipped with trailer tow mirror may exhibit various exterior rear view mirror functional concerns that require replacement after diagnosis. To properly determine if the defect is warrantable, cleaning and close inspection of the affected mirror may be required. To aid in proper warranty determination, the Rear-View Mirror Analysis general service bulletin (GSB) has been updated with a detailed cleaning procedure that should be followed prior to any inspection. New labor operations (17682ZZ or 17682ZZT) have been created that covers the cleaning and inspection process and may be used even if condition of failure is non-warrantable. Ford has inspected numerous returned parts and determined many cases are caused by damage which is unwarrantable and may be subject to chargeback. Refer to the latest version of the GSB on OASIS.
TSB 23-22402023-08-10. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; UNKNOWN OR OTHER. Some 2021-2023 F-150 vehicles may exhibit a no crank/no start with a battery draw and air conditioning (A/C) clutch engaged at all times. This may be due to an opened diode in the A/C clutch field coil damaging the output driver in the body control module C (BCMC). To correct the condition, follow the Service Procedure to replace the BCMC and A/C clutch field coil assembly.
SSM 517782023-07-20. Service bulletin. EQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS; BACK OVER PREVENTION:SOFTWARE. Some 2020-2021 Escape built on/before 23-Nov-2021, 2021 F-150 built on/before 08-Oct-2021, 2021 Mustang Mach-E built on/before 29-Mar-2021, 2021 Expedition built on/before 05-Aug-2021, 2021 Explorer built on/before 27-Sep-2021 and 2020-2022 Edge may exhibit a concern of the audio system does not power on, no sound from audio speakers, chimes default to coming through the instrument cluster, no communication with audio control module (ACM) or digital signal processor (DSP) module, and/or diagnostic trouble code (DTC) U0184, U0237 and/or U0238. To correct the condition, perform a hard reset of the DSP by disconnecting the 12-volt battery. Reprogram the DSP module using the latest version of the appropriate Ford diagnostic scan tool. For claiming, use causal part 18B849 and any applicable labor operations in Section 10 of the Service Labor Time Standards Manual.
SSM 517762023-07-12. Service bulletin. EQUIPMENT; BACK OVER PREVENTION: CAMERA SYSTEM. Some 2021-2023 Mustang Mach-E/F-150, 2022-2023 Expedition/Navigator and 2023 Corsair vehicles may exhibit a Driver Monitoring Camera Blocked message and/or DTCs B115E:97, B15E1:97 and/or B15E2:97 stored in the driver status monitor camera module (CMR). These DTCs should be disregarded unless it is a DTC with a status byte 8F. Other status bytes should be disregarded as they may be caused by a camera obstruction such as driver position, aftermarket devices or dust on the camera. To clear the DTCs, remove anything obstructing the view of the camera and light emitting diodes (LEDs), place the steering wheel in the center position and close the driver door. Connect Ford Diagnosis and Repair System (FDRS) and clear the DTCs. Turn the ignition off and wait 10 seconds. Turn the ignition on and wait 1 minute. Perform the CMR self-test and reevaluate if DTCs persist.
OTA23PU0327F1502023-07-06. Service bulletin. EQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS. Priority Update 23-PU0327-DSP-AMP for 2021-2022 F-150 vehicles is now available. Quality Improvements include: - Prevents unexpected loud static noise from playing through the speakers.
SSM 517622023-07-03. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Some 2021-2023 Ford and Lincoln vehicles equipped with SYNC 4 may exhibit the navigation feature in the center display screen only displaying imperial units and not being able to change to metric. This may be due to the software level of the SYNC module (APIM). This issue does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that engineering is currently working on a solution for this condition and will be released via Ford Power-Up software updates delivered over-the-air (OTA) expected in September 2023. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Schedule a service visit for customers who have disabled vehicle connectivity or who report that they did not receive the update in September 2023. Monitor OASIS for additional information.
SSM 517232023-06-21. Service bulletin. SEATS; EQUIPMENT. Some 2021 F-150 vehicles built on 22-Jul-2021 and through 09-Nov-2021 may experience inoperative heated front seats with diagnostic trouble codes (DTC) B1208:2A and/or B120A:2A in the driver front seat module (DSM). This may be due to various software parameters in the DSM. To correct the condition, download and run the DSM - Driver Front Seat Module (DSM) Configuration app on the latest level of the Ford diagnostic scan tool. For claiming use causal part number 14C708 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual.
SSM 517112023-06-21. Service bulletin. SEATS; EQUIPMENT. Some 2021-2023 F-150 vehicles may exhibit a condition where the front passenger OCS (occupant classification system) components (seat cushion foam, OCS bladder with OCSM (occupant classification system module) and front seat cushion adjuster) require replacement. These components are calibrated to each other and must be serviced as an assembly. The OCS service kit components are not to be installed separately. If a new OCS or OCS components are needed, a new OCS service kit must be installed as an assembly, which includes all components of the kit. A new passenger seat cushion cover and the heater mat can be installed separately. Refer to Workshop Manual, Section 501-20B Supplemental Restraint System, Removal and Installation. For claiming, use causal part 632A22 and applicable labor operations in Section 12 of the Service Labor Time Standards Manual.
SSM 516872023-06-16. Service bulletin. UNKNOWN OR OTHER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN. TSB 22-2428 is missing some labor operations. For any missing labor operations, claim available new model labor operations or m-time. Refer to this article on the repair order. When replacing the CDF cylinder, the current TSB does not require a complete transmission overhaul or cooler and converter flushing. Ford is currently reviewing the TSB. Monitor OASIS for updates.
SSM 516632023-06-06. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT:APPLIANCE:TV/RADIO/SPEAKERS. 2021-2023 F-150/Expedition may exhibit a pop noise and/or static in the speakers at start up that cannot be turned down or off using the audio system controls. To correct the condition, reprogram the audio digital signal processing module (DSP) to the latest software level using the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 18B849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 515892023-05-16. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE. Some 2021-2023 F-150/Mustang Mach-E/Edge vehicles may exhibit a concern of Android Auto unable to wirelessly connect and/or Android phones rebooting when connected to the vehicle via USB. This is due to a concern with the Google application on the customers device. Google has released a fix for these concerns. For Android phones not connecting wirelessly, request that the customer update their Android Auto version to 6.1 or later. For customers who's Android phone reboots when connected via USB, request that the customer update their Chrome application to 88.0.4324.181 or later. The customers service provider should be able to assist customers having difficulty updating their device. This is not a warrantable repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.