WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

644 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Automatic transmission are shown. Show all

Bulletins, newest first
TSB 24-20972024-04-04. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM.
SSM 523712024-04-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM. To correct this condition, run the PCM - Disable Pro Trailer Hitch Assist application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool.
SSM 523492024-04-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2023 F-150 vehicles may exhibit DTC C0604:00 stored in the powertrain control module (PCM) and may have an Active Air Dam System Fault See Manual message displayed in the instrument panel cluster (IPC). To correct this condition, clear and retest for the DTC C0604:00. If DTC C0604:00 returns, refer to Workshop Manual (WSM) Section 501-19 Bumpers, Diagnosis and Testing for additional diagnosis.
SSM 522442024-02-14. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM) and auto start/stop disabled. This may be due to a loose wiring connection to the belt integrated starter generator (BISG). The Workshop Manual (WSM) has recently been updated to provide new direction for DTC P0A1E. Refer to the WSM, Section 303-06 Starting System, Diagnosis and Testing, Starting System for applicable diagnosis.
OTA23PU0630YAW2024-02-07. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Software Update 23-PU0630-YAW-RT for 2021 MY F-150 vehicles is now available. Quality Improvements include: -Correct the Generator voltage desired (GENVDSD) parameter identification (PID) missing from the powertrain control module (PCM) PID list in the Ford Diagnosis And Repair System (FDRS) scan tool. Refer TSB 23-2154 - Robustness action in operation of vehicle to detect low-state-of-charge battery and prevent potential engine stall, as well as provide improved warning to customers when low-state-of-charge conditions exist. - Robustness action to prevent potential line pressure drift DTC P084B from setting. - Eliminate potential ABS Yaw Rate Calibration issue. - Robustness action to alleviate the Nuisance SSN (Stop Safely Now) mesage from setting and vehicle should operate as expected in the next Key Start event - Eliminates potential Emergency Parking Brake activation when wire harness experience a short.
TSB 23-24292024-01-05. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN. This article supersedes TSB 23-2363 to add 2021-2022 vehicle model years, update the symptom and the causal part. Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P084B stored in the powertrain control module (PCM). This may be due to the software level of the PCM. To correct this condition, perform the Service Procedure below to reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
SSM 515092023-04-06. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2023 F-150 vehicles equipped with a 3.3L engine may exhibit an illuminated MIL in the instrument panel cluster (IPC) with DTC P0171 stored in the powertrain control module (PCM). This may be due to the software of the PCM. Engineering is currently investigating this concern. To temporarily address this issue, clear the DTC and run the PCM - Reset the Keep Alive Memory (KAM) application in the Ford Diagnosis and Repair System (FDRS). Inform the customer they can continue to drive the vehicle. Monitor OASIS for additional updates.
TSB 23-20312023-04-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. Some 2021-2022 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P2C44:00 stored in the powertrain control module (PCM). This may be due to the software in the PCM and the auxiliary battery isolator. To correct the condition, follow the Service Procedure to reprogram the PCM and replace the auxiliary battery isolator.
TSB 23-20152023-01-31. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. 2021-2022 F-150 vehicles with 2.7L, 3.3L, 3.5L EcoBoost or 5.0L engines, 2020-2022 Transit vehicles with 3.5L Duratec/3.5L EcoBoost engines, 2023 Bronco with the 2.3L engine having charging system diagnostics performed in the Workshop Manual (WSM) may experience the generator voltage desired (GENVDSD) parameter identification (PID) missing from the powertrain control module (PCM) PID list in the Ford Diagnosis And Repair System (FDRS) scan tool. This may be due to a software parameter in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
SSM 510492022-08-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); UNKNOWN OR OTHER. Some 2021-2022 F-150 vehicles equipped with a 2.7L EcoBoost engine may experience and illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2ABA, P2ABC, P2AB7 and/or P2AB9 stored in the PCM. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. If no other DTCs or drivability symptoms are present, clear the DTCs and return the vehicle to the customer. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in October 2022. Monitor OASIS for additional information and schedule service appointments for customers once the repair becomes available.
SSM 509762022-08-02. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE; ELECTRICAL SYSTEM. Some 2021-2022 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated powertrain malfunction (wrench) indicator with DTC P2C44:00 stored in the powertrain control module (PCM). This may be due to an issue with ground circuit GD132 or the auxiliary battery isolator. Perform Pinpoint Test I in Workshop Manual (WSM), Section 303-06D and make sure the integrity of GD132 is carefully inspected and tested with the inclusion of G102, C146 and C1989C. Then perform the Auxiliary Battery Conditions(s) Test in WSM, Section 414-01, Pinpoint Test B. If no issues are found in Pinpoint Test I, GD132 and the auxiliary battery condition test passes, replace the auxiliary battery isolator per WSM, Section 414-01. For claiming, use causal part 14526 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 508852022-06-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. 2020-2022 Explorer/Aviator and 2021-2022 F-150 hybrid vehicles equipped with a 10R80 MHT require the Transmission Strategy Download application in the Ford Diagnosis and Repair System (FDRS) to be run after certain transmission or module repairs. The Transmission Strategy Download routine is failing in FDRS levels 32.5.3 and 32.5.4. The FDRS development team is working to resolve this in a future release of FDRS. In the meantime, uninstall FDRS from the computer using the select all function to remove all data and recordings. Reinstall the older FDRS version 31.6.5 using this url - http://www.fordservicecontent.com/Ford_Content/IDS/FDRS/FDRS_31.6.5.exe Once 31.6.5 is installed, download and run the Transmission Strategy Download application.
TSB 22-21542022-05-12. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:FUEL GAUGE:FUEL LEVEL FLOAT/SENSOR/SENDING UNIT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. This article supersedes TSB 22-2050 to update the Issue and Action. Some 2021 F-150 vehicles equipped with a low-level instrument panel cluster (IPC) which has a 4.2-inch display may experience erratic operation of the Eco-Coach feature, or this feature may be missing and/or the transmission temperature gauge reading inaccurate. This may be due to software parameters in the IPC. To correct the condition, follow the Service Procedure to reprogram the IPC. NOTE: The IPC software update that addresses the symptom listed in this bulletin may have been sent via Ford Power-Up software updates delivered over-the-air (OTA) to connected vehicles that have automatic updates enabled through the SYNC 4 screen. Enter the vehicle identification number (VIN) in Professional Technician System (PTS) and check the OTA Dashboard under the Connected Vehicle tab for OTA update history. If an update to the IPC has successfully completed recently and the customer is reporting the symptoms are no longer present, this article may not apply.
TSB 22-21512022-04-26. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE. Some 2021 F-150 vehicles equipped with a 3.5L PowerBoost engine and built on or before 23-Apr-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301-P0306, P0316, P050E, P1674, P0454 and/or P2451 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
SSM 507002022-04-20. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021 F-150 vehicles equipped with a 5.0L engine and built on or before 9-Apr-2021 may exhibit a no crank/no start with no powertrain control module (PCM) communication condition if the oil life is at or less than 20%. This may be due to various parameters within the PCM. To restore PCM communication and correct the condition, follow the service procedure in Customer Satisfaction Program 21B37.
SSM 506142022-03-22. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN; ELECTRICAL SYSTEM. Some 2021-2022 F-150 vehicles equipped with a 3.5L PowerBoost engine and built on or before 31-Jan-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostics trouble codes (DTCs) P04F0 And/Or P04EE stored in the PCM. This may be due to the fuel tank pressure (FTP) sensor becoming unseated from it's mount on the evaporative (EVAP) tube that connects to the top of the fuel pump and sender unit, causing an EVAP system leak near the top of the fuel tank. If the sensor is found to be unseated, resecure the sensor by pressing the sensor down vertically and retest. If the concern is resolved, the 9D683 assembly needs to be replaced due to the sensor retainers becoming weak. Refer to Workshop Manual, Section 303-13D. For claiming, use causal part 9D683 and applicable labor operations in Section 09 of the Service Labor Time Standards (SLTS) Manual.
21B37-S12022-01-03. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. Certain 2021 Model Year F-150 Vehicles with a 5.0L Engine Powertrain Control Module (PCM) Calibration for Oil Minder Update Program Terms: The program expiration date has been extended through September 30, 2022. Follow Up Owner Notifications: Owner letters advising of the extended expiration date will be sent.
TSB 21-24342022-01-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2020-2022 Explorer/Aviator/Police Interceptor Utility vehicles and 2021 F-150 vehicles equipped with a 10R80 MHT automatic transmission may exhibit a harsh/delayed engagement and/or a harsh/delayed shift with or without an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6, P07F7, P2700, P2701, P2702, P2703, P2704 and/or P2705 stored in the powertrain control module (PCM). This may be due to sticking valves in the main control valve body. To correct the condition, follow the Service Procedure steps to perform the PCM - Transmission Accelerated Main Control Break In routine for the appropriate clutch(s) and/or overhaul the main control valve body.
SSM 501842021-10-29. Service bulletin. POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CLUTCHES/BANDS:ACTUATORS/SOLENOIDS. Some 2021 Bronco/F-150/Explorer/Aviator/Police Interceptor Utility vehicles, excluding hybrid, may exhibit harsh or delayed engagement/shift concerns. Most concerns may be addressed with the PCM/TCM Transmission Accelerated Main Control Break In Routine. Refer to Workshop Manual (WSM), Section 307-01, DTC Chart and/or Diagnosis By Symptom to identify the clutch(s) to be cycled. This routine cycles the shift solenoids and clutch control valves to remove contamination that may be sticking the valves and must be performed along with an adaptive drive cycle before attempting internal service. Although this routine was developed for low mileage vehicles, its usage is being expanded for various symptoms across the life of the vehicle.For claiming, use causal part 7A100 and applicable labor operations in Section 7 of the Service Labor Time Standards (SLTS) Manual.
21B522021-09-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. Certain 2021 Model Year F-150 Raptor Vehicles Equipped with 3.5L Ecoboost Engines and Pro Power Onboard Powertrain Control Module Reprogramming; In all of the affected vehicles, if the outlet cover located in the bed of the vehicle is open more than approximately 17 degrees (due to a device plugged in, debris, etc.), the vehicle will not shift out of park when started.
21B322021-09-30. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. Certain 2021 Model Year F-150 Trailer Perimeter Alarm ;In all of the affected vehicles, an unexpected perimeter alarm will activate when the vehicle meets the following conditions: vehicle with transmission in park, ignition off, doors locked, perimeter alarm enabled, and a trailer connected
21B372021-07-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. In some affected vehicles, it may be possible fo the Powertrain Control Module to enter a non-recoverable reset condition at key-on when the software detects a low oil level AND the oil life remaining is between 5-20%. When the PCM is in the reset condition, the driver may experience a condition whe the engine will not attempt to turn on when the driver turns the key or presses the "engine start" button.
TSB 21-21542021-06-03. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021 F-150 vehicles equipped with a 5.0L engine and built on or before 04-Mar-2021 may experience an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0364, P060B, P062B, P164C, P2601, P0171, P0172, P0174, P0175 and/or P1104 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).
SSM 498212021-06-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE AND ENGINE COOLING. Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.