WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

279 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
SYNC-26.2.1.6.5.3 Bronco2026-04-28. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. 26S09 Recall Remedy -Update to enable rearview camera image to display when in reverse after infotainment screen thermal shutdown
SSM 547812026-04-28. Service bulletin. POWER TRAIN. Some 2021-2025 Bronco vehicles built on or before 09-Sep-2025 may require replacement of the ambient air temperature sensor for various concerns. Diagnostic trouble codes (DTC) P0071, P0072, and/or P0073 may be present in the powertrain control module (PCM). A concern has been identified in TSB 26-2006 that previously instructed replacement of the incorrect ambient air temperature sensor for the vehicle application. Monitor Professional Technician System (PTS) for updates.
TSB 26-20062026-04-22. Service bulletin. POWER TRAIN; UNKNOWN OR OTHER. Some vehicles listed in the model statement above may require the replacement of the ambient air temperature sensor for various concerns. DTCs P0071, P0072, and/or P0073 may be present in the powertrain control module (PCM).
SSM 547202026-04-10. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
24N12 S22026-04-07. Other. ENGINE. Certain 2021 - 2022 Model Year Various Vehicles Engine Valve Inspection Test This submission includes : Technical Instructions Updated wording and description with additional photo.
PCM-24.10.02 Bronco2026-04-06. Over-the-air update. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; POWER TRAIN. "Quality improvements include: - Optimizes cabin ventilation strategy at high speeds"
PCM-24.06.02 Bronco2026-04-03. Over-the-air update. UNKNOWN OR OTHER; POWER TRAIN. "Quality improvements include: - Optimizes cabin ventilation strategy at high speeds"
PCM-23.11.04 Bronco2026-04-03. Over-the-air update. UNKNOWN OR OTHER; POWER TRAIN. "Quality improvements include: - Optimizes cabin ventilation strategy at high speeds"
PCM-23.11.02 Bronco2026-04-03. Over-the-air update. UNKNOWN OR OTHER; STRUCTURE:BODY. "Quality improvements include: - Optimizes cabin ventilation strategy at high speeds"
PCM-23.11.02 Bronco2026-04-03. Over-the-air update. STRUCTURE:BODY; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. "Quality improvements include: - Optimizes cabin ventilation strategy at high speeds"
SYNC-25.1.7.10.1 Bronco2026-04-02. Over-the-air update. UNKNOWN OR OTHER; VISIBILITY/WIPER; ELECTRICAL SYSTEM. "25S49 Recall Remedy: -Infotainment software update to address frozen screens"
25N172026-03-27. Other. LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; UNKNOWN OR OTHER. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
SSM 546292026-03-11. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Some 2021-2023 Bronco vehicles may exhibit a charging system lamp that illuminates intermittently, and/or diagnostic trouble code (DTC) B11DB:08 in the body control module (BCM). This may be due to a loose fuse terminal for the low voltage high current fuse (3A). If this condition is present, compare fuse removal effort between the low voltage high current fuse and like fuses in the battery junction box (BCMC). If removal effort for the fuse is low, replace the low voltage high current fuse panel assembly to correct this condition. Refer to Workshop Manual (WSM) Section 414-01 > Removal and Installation > Low Voltage High Current Fuse. For claiming, use causal part 14526 and labor time MT14526SSM with a limit of 0.5 hours.
SSM 545922026-02-27. Service bulletin. POWER TRAIN. For 20172026 vehicles equipped with a 10R transmission, a revision to the Road Testing Vehicle procedure has been made in the WSM, located in Section 307-01 > Diagnosis and Testing. This updated procedure improves the diagnosis of customer reported transmission concerns and aids in locating the proper root cause. During diagnosis and testing, details regarding whether the condition is more prevalent when the vehicle is hot or cold, throttle percentage at the time of occurrence, vehicle speed, the specific shift involved, and whether the issue occurs during transmission engagements (N>R, N>D, R>D, or D>R) should be noted. Engineering requests including these detailed operating conditions that will significantly assist with root cause analysis. Diagnosis, testing, and repair should use established labor times outside this article.
SSM 546012026-02-27. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY; UNKNOWN OR OTHER. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
SYNC-25.2.1.6.5.2 Bronco2026-02-25. Over-the-air update. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; VISIBILITY/WIPER. Quality Improvements Include: - Bug Fixing and Feature improvements. - Resolves black screen issue caused when there is no SiriusXM disk space.
TSB 25-26252026-01-13. Service bulletin. UNKNOWN OR OTHER. This article supersedes 24-2387 to update the Parts List, Service Procedure enhancements, and labor operation allowances in place of M-time. Some of the vehicles listed in the Model statement above equipped with a factory subwoofer may exhibit a rattle from right loadspace trim panel at high audio system volumes. This may be due to lose and/or broken attachments.
TSB 25-26132026-01-13. Service bulletin. SUSPENSION; UNKNOWN OR OTHER. This article supersedes TSB 24-2408 to update the parts list. Some of the vehicles listed in the Model statement above may exhibit a loud front end clink/clunk noise that leads to the identification of a cracked or broken front differential frame mount bracket. This may be due to flexing of the front differential from driving in 4L for extended periods of time. Note: Advise the customer that 4L/Rock Crawl drive mode should only be used when necessary, as using 4L when not necessary can cause damage to the vehicle. Refer to the Owner's Manual for additional information.
25L022026-01-05. Other. UNKNOWN OR OTHER. Special Field Action 25L02 Certain 2017-2024 Model Year California Emissions-Certified Vehicles Transmission Control Assembly Reimbursement
SSM 544312025-12-10. Service bulletin. SERVICE BRAKES. Some 2021-2024 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. Replace the brake fluid reservoir and the brake fluid level sensor electrical connector. Do not disconnect the brake fluid level sensor electrical connector, cut the connector 3-4 inches (75-100 mm) from the connector end and leave the brake fluid level sensor electrical connector attached to brake fluid reservoir. Include these parts in the same package when returning warranty replacement brake fluid reservoirs. The brake fluid reservoir with the electrical connector still connected should be packaged in the original box to protect it during shipping. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
TSB 25-25752025-12-02. Service bulletin. SUSPENSION; ELECTRICAL SYSTEM. This article supersedes TSB 24-2104 to update the vehicle model years affected. Some vehicles listed in the Model statement above may exhibit a "Sta-bar Disconnect Service Required" message in the instrument panel cluster (IPC) and an illuminated warning light with any of the following diagnostic trouble codes (DTCs) stored in the chassis control module (CHCM): C103A, C1A99, C1B03, C1B07, C1B14 and/or B1A67. This may be due to water intrusion in the stabilizer bar wiring harness connector.
TSB 25-25512025-12-01. Service bulletin. STRUCTURE:BODY. Some of the vehicles listed in the model statement above may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate.
SSM 543622025-11-12. Service bulletin. SERVICE BRAKES; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2025 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. Replace the brake fluid reservoir and the brake fluid level sensor electrical connector. Do not disconnect the brake fluid level sensor electrical connector, cut the connector 3-4 inches (75-100 mm) from the connector end and leave the brake fluid level sensor electrical connector attached to brake fluid reservoir. Include these parts in the same package when returning warranty replacement brake fluid reservoirs. The brake fluid reservoir with the electrical connector still connected should be packaged in the original box to protect it during shipping. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
SSM 543132025-10-28. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. Some 2020-2025 various Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
SSM 542752025-10-14. Service bulletin. ENGINE. Some 2021-2023 Explorer vehicles equipped with a 3.0L EcoBoost engine, 2021-2023 Aviator vehicles equipped with a 3.0L EcoBoost or 3.0L plug-in hybrid electric vehicle (PHEV) engine, 2021-2023 Edge/Nautilus vehicles equipped with a 2.7L EcoBoost, 2021-2024 F-150 vehicles equipped with a 2.7L EcoBoost, and 2021-2024 Bronco and 2024 Ranger vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine. This noise may occur on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to an internal component of the variable cam timing (VCT) unit. Workshop Manual (WSM), Section 303-00 > Diagnosis and Testing > Engine > Pinpoint Test F has been updated to include additional steps along with a video to identify the affected VCT unit that requires replacement.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.