WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

279 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
TSB 26-23802026-09-29. Service bulletin. SUSPENSION; ELECTRICAL SYSTEM; STRUCTURE:BODY; UNKNOWN OR OTHER. This article supersedes TSB 25-2575 to update the Parts list to add the applicable body wiring harnesses and underbody shield bolts. Some vehicles listed in the Model statement above may exhibit a "Sta-bar Disconnect Service Required" message in the instrument panel cluster (IPC) with any of the following diagnostic trouble codes (DTCs) stored in the chassis control module (CHCM): C103A, C1A99, C1B03, C1B07, C1B14 and/or B1A67. This may be due to water intrusion in the stabilizer bar wiring harness connector.
SSM 550092026-07-20. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Some 2021-2026 Bronco vehicles may exhibit a "Park Brake Limited Function Service Required" message in the instrument panel cluster (IPC). This may be due to an issue with the driver door harness connector after removing and installing the removeable doors. If diagnostic trouble code (DTC) B1625:29 is stored in the driver door module (DDM), inspect connector C322C between the upper and lower door hinges that attaches to the body for proper installation and/or pin fitment. Repair as necessary. If the condition was caused by improper door installation, do not submit a claim for this condition. If no concerns are found with the connector, refer to Workshop Manual (WSM), Section 501-11 > Diagnosis and Testing for normal diagnostics.
TSB 26-22982026-06-29. Service bulletin. VISIBILITY/WIPER; STRUCTURE:BODY; UNKNOWN OR OTHER. This article supersedes 25-2551. Reason for update: to correct the descriptions for the liftgate glass weather seals. Some of the vehicles listed in the model statement above may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate.
PCM-23.11.02 Bronco2026-04-03. Over-the-air update. UNKNOWN OR OTHER; STRUCTURE:BODY. "Quality improvements include: - Optimizes cabin ventilation strategy at high speeds"
PCM-23.11.02 Bronco2026-04-03. Over-the-air update. STRUCTURE:BODY; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. "Quality improvements include: - Optimizes cabin ventilation strategy at high speeds"
SSM 546012026-02-27. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY; UNKNOWN OR OTHER. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
TSB 25-25512025-12-01. Service bulletin. STRUCTURE:BODY. Some of the vehicles listed in the model statement above may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate.
TSB 25-24532025-10-02. Service bulletin. STRUCTURE:BODY; UNKNOWN OR OTHER. This article supersedes TSB 24-2269 to add 2025 model year vehicles. Some of the vehicles listed in the Model statement above may exhibit the driver or passenger side upper rail front trim panel with a warped or misaligned appearance.
TSB 25-24392025-09-23. Service bulletin. STRUCTURE:BODY. This article supersedes TSB 23-2229 to update the labor times from M-time to M-Time with a limit. Some of the vehicles listed in the Model Statement may exhibit soft top exterior wear on the sides of the soft top material above the B-pillar. This may be due to contact and rubbing between the soft top frame and soft top material.
TSB 25-24332025-09-23. Service bulletin. STRUCTURE:BODY. S+A42:H67me of the vehicles listed in the Model statement above may exhibit the hard top center panel's quarter turn latches come loose while driving.
SSM 539812025-07-02. Service bulletin. VISIBILITY/WIPER; STRUCTURE:BODY. Some 2021-2024 Bronco vehicles may exhibit a rattle from the front windows with the windows placed in the partially down position and driving over rough roads and/or bumps. This may be due to the interface between the window glass and the body mounted glass run. To correct this condition, replace the body mounted glass runs using the body mounted glass run kit (3 door: M2DZ-9821597-E, and 5 door: M2DZ-7821597-F) which contains updated seals for improved sealing performance. For claiming, use causal part 9821597/7821597 and labor operations 23943A and 23943A19 in Section 12 of the Service Labor Time Standards (SLTS) Manual.
SSM 539622025-06-24. Service bulletin. STRUCTURE:BODY; VISIBILITY/WIPER. Some 2021-2025 Bronco vehicles may exhibit a water leak from the A-pillar, overhead console/upfitter switches and/or sun visors. If a leak is identified from this area, refer to Workshop Manual (WSM), Section 501-18 Pinpoint Test (PPT) G for water leak diagnosis. If the PPT leads to the replacement of the header seal, a revised header seal has been released for service (M2DZ-7803110-H) which contains a thicker consistent bead of butyl across the entire length of the seal. The header seal will need to be firmly depressed and massaged to make sure all of the butyl that is across the entire header seal will properly adhere to the body, creating a water-tight seal. For claiming, use causal part 7803110 and labor operation 03110A in Section 12 of the Service Labor Time Standards (SLTS) Manual.
TSB 24-22692024-09-19. Service bulletin. STRUCTURE:BODY. Some 2021-2024 Bronco may exhibit the upper rail front trim panel with an excessive gap. This may be due to the misalignment of the upper rail front trim panel.
TSB 24-22652024-09-02. Service bulletin. STRUCTURE:BODY. This article supersedes 24-2186 to update the model years affected. Some 2021-2023 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process. To correct this condition, follow the Service Procedure to reattach the headliner or replace the soft top roof material.
TSB 24-21862024-06-12. Service bulletin. STRUCTURE:BODY. This article supersedes 24-2080 to add 2024 model year vehicles. Some 2021-2024 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process. To correct this condition, follow the Service Procedure to reattach the headliner or replace the soft top roof material.
SSM 525522024-05-30. Service bulletin. STRUCTURE:BODY. Some 2021-2024 Bronco vehicles may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate. Inform customers that engineering is aware of this condition and is currently working on a solution which is expected in Q3 2024. Schedule a service visit for customers when the repair is available in Q3 2024. Monitor OASIS for additional information.
SSM 525502024-05-23. Service bulletin. STRUCTURE:BODY. Some 2021-2024 Bronco vehicles equipped with a factory soft top roof may experience snow or sand accumulation on the vehicles interior during a strong storm with high winds. Inform customers that repair kits are currently on backorder and are expected to be available Q3 2024. Schedule a service visit for customers when the repair is available in Q3 2024. Monitor OASIS for additional information.
SSM 523642024-04-04. Service bulletin. STRUCTURE:BODY:DOOR; ELECTRICAL SYSTEM:SOFTWARE. 2021-2023 Bronco vehicles built on or before 9-Jul-2023 may have new version software in their driver door module (DDM) and passenger door module (PDM) that contains noticeable enhancements to the window short drop operation. This software level can be identified in the DDM and PDM as Software Part Number MU5T-14C064-CR or later. This software was released via a software update delivered over-the-air (OTA) starting in September 2023 if the vehicle's connectivity was enabled in the vehicle settings. Vehicles with this new software will exhibit a short drop event to all door windows anytime the vehicle is unlocked using the remote keyless entry (RKE), accessory keyless entry keypad, or the interior door unlock switch. The short drop function will return to the UP position when a lock input is received from these same inputs. For vehicles equipped with passive entry, a short drop event will not activate when a door is unlocked by placing a hand on an exterior door handle. 2023-2024 Bronco vehicles built on and after 10-Jul-2023 received this software from the factory.
TSB 24-20802024-04-03. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS; STRUCTURE; EQUIPMENT. This article supersedes 23-2024 to update parts list to include rivets. Some 2021-2023 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process.
TSB 24-20322024-03-07. Service bulletin. EQUIPMENT; STRUCTURE:BODY:TRUNK LID. Some 2021-2023 Bronco vehicles built on or before 28-Feb-2023 may exhibit water entry into the rear trunk. This may be due to a lack of body seam sealer at the floor panel to trunk sheet metal joint. This repair procedure addresses water entry from underneath of the vehicle into the rear trunk area (jack storage compartment). This article does not apply if water is entering the vehicle from above the rear trunk area (such as from the roof, rear window etc.). To correct the condition, follow the Service Procedure to apply seam sealer to the forward trunk to floor panel sheet metal joint.
SSM 521782024-01-18. Service bulletin. ENGINE; UNKNOWN OR OTHER; STRUCTURE: UNDERRIDE. Some 2021-2024 Bronco vehicles may exhibit a rattle from the front windows with the windows placed in the partially down position and driving over rough roads and/or bumps. This condition is currently under investigation and repairs and/or component replacement is not expected to reduce the rattle. Inform customers that they can continue to drive the vehicle and that engineering is currently developing a solution which will be available in Q3 2024. Monitor OASIS and schedule a follow up appointment with the customer when the fix becomes available.
TSB 23-22412023-08-02. Service bulletin. EQUIPMENT; STRUCTURE. Some 2021-2023 Bronco vehicles equipped with a factory subwoofer and built on or before 20-Mar-2023 may exhibit a rattle from right loadspace trim panel at high audio system volumes. This may be due to poor retention from the right loadspace trim panel tree fasteners. To correct this condition, follow the Service Procedure to replace the tree fasteners on the right loadspace trim panel.
SSM 517902023-07-18. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE:BODY:HOOD; LATCHES/LOCKS/LINKAGES:HOOD:LATCH. Some 2022-2023 Bronco vehicles built on 01-Sept-2022 and through 20-Mar-2023 may exhibit an intermittent illuminated hood ajar indicator on the instrument panel cluster and/or a false alarm activation caused by a hood ajar event. This may be due to an internal failure of the hood latch while the hood remains properly latched. To correct the condition, replace the hood latch (service base part number 16700). For claiming, use the causal part number 16700 and applicable labor operations in Section 12 of the Service Labor Time Standards (SLTS) Manual.
TSB 23-22132023-07-12. Service bulletin. STRUCTURE. Some 2021-2023 Bronco vehicles built on or before 31-May-2023 may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to reseal the affected body seam.
TSB 23-21632023-05-31. Service bulletin. EQUIPMENT; STRUCTURE. Some 2021-2022 Bronco vehicles built on or before 25-Jul-2022 may exhibit a rattle noise from the tailgate when driving on rough roads. The rattle may diminish with the spare tire removed. This may be due to the design of the tailgate and tailgate hinges. To correct this condition, follow the Service Procedure to replace the tailgate and the upper and lower tailgate hinges.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.