WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

279 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
SSM 516942023-06-16. Service bulletin. VISIBILITY; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some 2021-2023 Bronco vehicles may exhibit a rattle from the front windows with the windows placed in the partially down position and driving over rough roads and/or bumps. This condition is currently under investigation and repairs and/or component replacement is not expected to reduce the rattle. Inform customers that they can continue to drive the vehicle and that engineering is currently developing a solution which will be available in Q4 2023. Monitor OASIS and schedule a follow up appointment with the customer when the fix becomes available.
SSM 516872023-06-16. Service bulletin. UNKNOWN OR OTHER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; POWER TRAIN. TSB 22-2428 is missing some labor operations. For any missing labor operations, claim available new model labor operations or m-time. Refer to this article on the repair order. When replacing the CDF cylinder, the current TSB does not require a complete transmission overhaul or cooler and converter flushing. Ford is currently reviewing the TSB. Monitor OASIS for updates.
TSB 23-21622023-06-16. Service bulletin. PARKING BRAKE; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY:VEHICLE CONTROLS:STEERING; PARKING BRAKE:ELECTRICAL:SWITCH. Some 2021-2022 Bronco vehicles built on or before 18-Sept-2022 may exhibit a broken parking brake switch. The original parking brake switch design is no longer available. For vehicles within this build date that require parking brake switch replacement, follow the Service Procedure to install a steering column opening cover which will come with a new and improved parking brake switch design.
TSB 23-20192023-06-13. Service bulletin. POWER TRAIN; POWER TRAIN:MANUAL TRANSMISSION:INTERNAL:GEARS. Some 2021-2023 Bronco vehicles equipped with a MT88 manual transmission may experience a rotational scraping noise while the transmission is in neutral, 1st or 2nd gear with the clutch pedal released and may be more noticeable in ambient temps below 10°C (50°F) and after a cold soak. This noise may diminish as the transmission warms up. This may be due to the 5th and 6th gear synchronizer rings. To correct the condition, follow the Service Procedure to replace the 5th and 6th gear synchronizer rings.
SSM 516772023-06-08. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. Some 2021-2023 Bronco vehicles may exhibit an inaccurate AAT reading with DTC P0072 stored in the powertrain control module (PCM). The Workshop Manual (WSM), Section 413-01 > pinpoint test (PPT) BC has been updated to address this concern. The AAT WSM updates include: improved diagnosis and testing, AAT sensor reset, and the AAT sensor interaction with climate control system and gateway module A (GWM).
SSM 516732023-06-08. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2021-2023 Bronco vehicles may exhibit a warning message displayed in the instrument panel cluster (IPC) that there is a trailer connected to the vehicle when no trailer is connected. The Workshop Manual (WSM), Section 417-01 > Trailer Lamps, has been updated with Pinpoint Test (PPT) J - Message Center Displays An Incorrect Trailer Message.
SSM 516562023-06-05. Service bulletin. POWER TRAIN. Some 2022-2023 F-150/Bronco/Expedition/Navigator/Escape/Corsair/Bronco Sport/Edge/Mustang vehicles built on 04-Sep-2022 and through 30-Dec-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0230 stored in the powertrain control module (PCM). The vehicle may also experience a no start or stall after start. This may be due to an internal PCM issue. If this DTC is present, verify the battery condition, then perform pin point test (PPT) KC of the Work Shop Manual (WSM), Section 310-01. If PPT KC leads to component replacement, start with replacing the PCM and then evaluate the vehicle. If the DTC returns, follow WSM, Section 310-01 PPT KC direction to address the issue.
TSB 23-21632023-05-31. Service bulletin. EQUIPMENT; STRUCTURE. Some 2021-2022 Bronco vehicles built on or before 25-Jul-2022 may exhibit a rattle noise from the tailgate when driving on rough roads. The rattle may diminish with the spare tire removed. This may be due to the design of the tailgate and tailgate hinges. To correct this condition, follow the Service Procedure to replace the tailgate and the upper and lower tailgate hinges.
TSB 22-24282023-05-30. Service bulletin. POWER TRAIN. Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60 transmission and built on or before 23-Dec-2022 or with a 18R80/10R80MHT transmission and built on or before 15-Aug-2022 may exhibit a harsh/delayed engagement and/or harsh/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the PCM or TCM, the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
SSM 516652023-05-29. Service bulletin. ENGINE AND ENGINE COOLING. Some 2021-2023 Ford and Lincoln vehicles equipped with a 2.7L or 3.0L engine may exhibit an upper engine thump/knock noise coming from the left cylinder head. This condition is most noticeable at idle and may lessen at higher engine speed or while driving. This condition does not affect vehicle durability and will not get worse over time. Use a stethoscope or chassis ears and listen just behind the left cylinder head intake VCT solenoid on the cam cover to determine if the thump/knock noise is coming from the cylinder head/camshaft. The left cylinder head and the camshaft roller followers are available as service parts.
TSB 23-21352023-05-24. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. Some 2021-2022 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit various charging system error messages and/or illuminated charging system indicator displayed in the instrument panel cluster (IPC) with diagnostics trouble code (DTC) B11DB set within the body control module (BCM). This may be due to coolant contamination into the battery monitor sensor (BMS) from a leaking transmission fluid heater coolant control valve. To correct the condition, follow the Service Procedure to clean the BMS connector and replace the transmission fluid heater coolant control valve.
TSB 23-21542023-05-23. Service bulletin. BACK OVER PREVENTION:SOFTWARE; POWER TRAIN. 2021-2022 F-150 vehicles with 2.7L, 3.3L, 3.5L EcoBoost or 5.0L engines, 2020-2022 Transit vehicles with 3.5L Duratec/3.5L EcoBoost engines, 2021-2023 Bronco with the 2.3L or 2.7L engine having charging system diagnostics performed in the Workshop Manual (WSM) may experience the generator voltage desired (GENVDSD) parameter identification (PID) missing from the powertrain control module (PCM) PID list in the Ford Diagnosis And Repair System (FDRS) scan tool. This may be due to a software parameter in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
TSB 23-21382023-05-23. Service bulletin. POWER TRAIN. Some 2022 Aviator/Bronco/Expedition/Explorer/F-150/Mustang/Navigator/Ranger/Transit vehicles built on or before 31-Jul-2022 equipped with a 10R60/10R80/10R80 MHT automatic transmission may exhibit a fluid leak from the selector shaft seal. This may be caused by a crack in the manual shaft. To correct this condition, follow the Service Procedure to replace the manual shaft, the manual shaft-to-sensor roll pin and the selector shaft seal.
22PU0301ESCNT2023-05-05. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Priority Update 22-PU0301-ESC-NT for 2022-2023 Bronc vehicles is now available. Quality Improvements include: - Change in the interaction of the EBB with Neutral Tow feature. - Improved ESC yaw rate plausibility check
SSM 515362023-05-04. Service bulletin. STRUCTURE. For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
SSM 515422023-05-04. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Some 2020-2023 F-150 and 2021-2023 Bronco vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit a ticking/tapping or rattle type noise from the top front cover area of the engine on initial start-up after a cold soak of 6 hours or more that may last for 2-5 seconds. This may be due to a stuck internal component of the variable cam timing (VCT) unit. To correct the condition, replace all 4 of the VCT units following Workshop Manual (WSM), Section 303-01. For claiming, use causal part 6C525 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual. If labor times are not available, claim M-time.
SSM 515382023-05-04. Service bulletin. STRUCTURE:BODY:HOOD. Some 2022-2023 Bronco vehicles built on or after 01-Sep-2022 may exhibit an intermittent illuminated hood ajar indicator on the instrument panel cluster and/or a false alarm activation caused by a hood ajar event. This may be due to an internal failure of the hood latch. For vehicles that meet this criteria, replace the hood latch (service base part number 16700) to repair the vehicle. For claiming use the causal part number 16700 and applicable labor operations in Section 12 of the Service Labor Time Standards (SLTS).
SSM 515332023-05-04. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES. Some 2021-2023 Bronco vehicles may exhibit a diagnostic trouble code (DTC) B15F1:15 code stored in memory of the passenger door module (PDM). This code was intended for a right mirror indicator light emitting diode (LED) feature on vehicles and currently is not used. This code may be due to PDM module software. If the PDM module exhibits DTC B15F1:15, the DTC should be ignored.
TSB 23-21172023-05-04. Service bulletin. STRUCTURE; VISIBILITY:REAR WINDOW WIPER/WASHER. Some 2021-2022 Bronco vehicles may exhibit paint damage on the rear quarter panel due to contact with the rear window assembly (D-pillar). This may be due to an oversized washer being used during production. To correct the condition, repair the paint damage to the rear quarter panel and replace the rear window assembly.
SSM 515312023-05-04. Service bulletin. POWER TRAIN. Some 2020-2023 Explorer/Aviator/Transit, 2021-2023 F-150/Bronco, 2022-2023 Expedition/Navigator/Mustang and 2023 F-250/F-350 Super Duty vehicles may exhibit harsh/delayed engagement and/or harsh/delayed shift concerns. These may be addressed with the powertrain control module (PCM)/transmission control module (TCM) Transmission Accelerated Main Control Break In Routine and/or a main control overhaul. Refer to Workshop Manual (WSM), Section 307-01, DTC Chart if DTCs are present and/or Diagnosis By Symptom to identify the clutch(s) to be cycled. Cycling the shift solenoids and clutch control valves to remove contamination must be performed along with an adaptive drive cycle before attempting repair. For claiming, use causal part 7A100 and applicable labor operations in Section 7 of the Service Labor Time Standards (SLTS) Manual.
SSM 514192023-04-04. Service bulletin. POWER TRAIN. Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability.
SSM 514152023-04-04. Service bulletin. ENGINE AND ENGINE COOLING. Customers who neutral (4-wheel flat) tow a 2021-2022 Bronco equipped with a 2.7L engine or a 2022-2023 Bronco Raptor may report an inconsistent brake assist when a supplemental braking system has been installed. This may result from supplemental brake system set-up that does not account for the vehicles anti-lock brake (ABS) module entering sleep mode after a pre-determined period of time following vehicle shut-down. This functionality was necessary to prevent a battery drain from occurring. Enhanced software has been developed to keep the ABS module in a consistent sleep state when the vehicle enters neutral tow mode. For vehicles that meet this criterion, reprogram the ABS module using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use casual part 2C219.
SSM 514072023-04-04. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2021-2022 Ford and Lincoln vehicles equipped with SYNC 4 may experience an error message during the gateway module (GWM) software update application which states Procedure Unsuccessful- GetConfigDataFromGIVIS. This may be the result of a server related concern. To correct the condition, download and run the Ford Diagnosis and Repair System (FDRS) application GWM-Read the Gateway Module A (GWM) Configuration Data application. When the application completes, refresh and re-attempt the GWM-Gateway Module A (GWM) Software Update application. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 23-21052023-04-04. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2021-2022 Bronco vehicles may experience at least one of the following symptoms: blank/frozen center display screen, Android Auto Apple Carplay connectivity, checkerboard display and/or Bluetooth connectivity. This may be due to the software in the accessory protocol interface module (APIM). To correct the condition, follow the Service Procedure to reprogram the APIM. NOTE: The APIM software update that addresses the symptom listed in this article may have been sent via Ford Power-Up software updates delivered over-the-air (OTA) to connected vehicles that have automatic updates enabled through the SYNC 4 screen. Enter the vehicle identification number (VIN) in Professional Technician System (PTS) and check the OTA Dashboard under the Connected Vehicle tab for OTA update history. If an update to the APIM has successfully completed recently and the customer is reporting the symptoms are no longer present, this article may not apply.
TSB 23-20912023-04-04. Service bulletin. EQUIPMENT; STRUCTURE:BODY:ROOF AND PILLARS; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some 2021-2022 Bronco vehicles equipped with a soft top roof may exhibit loose exterior fabric on the rear window assembly. This may be due to broken D-pillar clips on the rear window. To correct the condition, follow the Service Procedure to replace the D-pillar clips with rivets and washers.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.