WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

827 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SA-061-20a2020-10-05. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. If you receive a customer concern about the CHECK IN light coming on and DTC P3400 (cylinder deactivation system malfunction) stored, the cylinder deactivation oil control valve may be plugged with plastic debris from the oil filter wrapper. The debris may enter the center of the oil filter when poking a hole in the filter wrapper during removal, and then travel through the engine and plug the cylinder deactivation oil control valve.
CSP06d2020-10-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. CSP06 - 2019 MAZDA3 MODULE UPDATE FOR CONNECTED SERVICES. Please review the newest repair procedure updated today, September 25, 2020 that performs 2 required checks of the TCU Serial # in addition to the previous update to print out and give each owner the customer communication document after the CSP06 update. CSP06 campaign is currently in open status for all affected VINs' in the Warranty Vehicle Inquiry screen located in eMDCS. The Connected Vehicle services will launch in October, this campaign is designed to prepare the vehicle for the customer so that it is ready once Connected Vehicle services is activated. This also means Connected Vehicle services is not active. Please have your Service Advisors and BDC employees review the customer communication from Marketing “Service Advisors and BDC Employees” and share this specific information with the customer after the vehicle has been updated under CSP (06). Repair all affected new and used inventory at your dealership and program all affected customer vehicles as they come in for service. Important: Updated repair procedures have been posted to MGSS. Please ensure your teams use the most updated repair procedures available in MGSS under this CSP.
09-032-20-37392020-10-03. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. Some vehicles may exhibit that the liftgate interferes with the rear bumper when closed forcefully, resulting in damaged paint on the rear bumper. Due to variations of the clearance between the liftgate and the rear bumper, the bottom edge of the liftgate may overrun the rear bumper. To correct this concern, the hardness of stop rubbers on the liftgate has been modified.
05-002-20-3704a2020-10-02. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN. Some customers may complain about a surging at low speeds and during acceleration. This surging is in the longitudinal direction, felt about 2 cycles per second, and occurs in the locked up 1st gear. This may be caused by the torque fluctuation and the torsional resonance in the torque converter. To correct this concern, the PCM software has been modified to reduce the torque fluctuation.
02-006-20-36882020-10-02. Service bulletin. EQUIPMENT; SUSPENSION. Some vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface. The noise may be caused by the mounting rubber (1) because of insufficient clearance between the rubber and the metal bracket of the mounting rubber during the assembly process. To correct this issue, the mounting rubber has been modified to ensure the proper clearance.
01-012-20-37382020-10-02. Service bulletin. ENGINE AND ENGINE COOLING. Some vehicles may experience the check engine light on with DTCs P2096:00, P2097:00 and/or P0524:00 that cannot be cleared by itself, and the check engine light stays on even if the detection condition has gone.• P2096:00 - Air fuel too lean • P2097:00 - Air fuel too rich • P0524:00 - Engine oil pressure too low. This concern may be caused by improper PCM control logic. The PCM software has been modified to eliminate this concern.
SA-063-202020-09-03. Service bulletin. ELECTRICAL SYSTEM. When performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always use the GR8 battery charger SST to maintain battery voltage.
SA-062-202020-09-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; PARKING BRAKE; VISIBILITY; FORWARD COLLISION AVOIDANCE. Some customers may complain about the following message displayed in the Multi-Information Display: In the following cases, the MRCC with Stop & Go function system is canceled when the vehicle is traveling at 19 mph (30 km/h) or less: • The Forward Sensing Camera (FSC) cannot detect target objects due to one of the following: • The windshield is dirty • The FSC lens is foggy • There is low visibility due to rain, fog or snow • It is at night and there is not enough light • There is direct or reflected sunlight on the FSC • There is problem with the FSC • There is a problem with the AUTOHOLD control function. • There is a problem with the electric parking brake (EPB).
MT-002-202020-09-02. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; WHEELS. New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010.
SA-061-202020-09-01. Service bulletin. ENGINE AND ENGINE COOLING. If you receive a customer concern about the CHECK IN light coming on and DTC P3400 (cylinder deactivation system malfunction) stored, perform the inspection in the Repair Procedure.
SA-060-202020-09-01. Service bulletin. ELECTRICAL SYSTEM. When replacing the Body Control Module (BCM) in a 2019 Mazda3, it needs to be configured and the instructions in the Workshop manual on MGSS are incorrect. Use the instructions in the Repair Procedure below to configure the new BCM.
SA-059-202020-09-01. Service bulletin. ELECTRICAL SYSTEM. During BCM replacement, MDARS may display a Configuration Error warning message. This may be caused by any of the following: "Poor internet connection", MDARS failure - Low Battery. Perform the BCM Recovery Procedure below to manually configure the BCM.
SA-058-20b2020-09-01. Service bulletin. ENGINE AND ENGINE COOLING. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. NOTE: Cylinder head replacement requires MASH authorization.
SA-058-20a2020-09-01. Service bulletin. ENGINE AND ENGINE COOLING. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. NOTE: Cylinder head replacement requires MASH authorization.
SA-054-20d2020-09-01. Service bulletin. ENGINE AND ENGINE COOLING. Some customers may experience an engine no start due to low battery voltage on 2019-2020 Mazda3 and 2020 CX30. Inform the customer that Mazda is actively investigating this issue and apologizes for any inconvenience. Mazda would like to request both dealer and customer support to expedite a repair. Customers having this concern should be instructed to contact Mazda Roadside Assistance and have their vehicle inspected by a local dealer.
SA-014-20a2020-09-01. Service bulletin. ELECTRICAL SYSTEM. On some vehicles, the Commander switch might be inoperative. This could be caused by fuse F13 (15A) being removed instead of F15 (15A) at the factory in the lower panel compartment on the left side of the steering wheel.
16-003-20-37312020-09-01. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE); ELECTRICAL SYSTEM:SOFTWARE; ENGINE AND ENGINE COOLING. Some customers may not be comfortable with being notified of an engine stall due to an error when operating the clutch pedal. When the engine stalls, the charging system warning light is illuminated and a vehicle malfunction notification is received through the MyMazda APP on the mobile device. This is caused by improper control software of the PCM. To eliminate this concern, the PCM software has been modified to avoid the unnecessary malfunction notification.
15-002-20-37192020-09-01. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; SERVICE BRAKES. Some vehicles equipped with Smart Brake Support (SBS) may exhibit a front radar system malfunction message in the instrument cluster with DTC C1A67:04 (front radar sensor internal malfunction) stored in memory. This may be caused by water penetrating into the front radar sensor through the breather hole when exposed to a great amount of water and damaging the radar sensor, resulting in the DTC C1A67:04. To eliminate this concern, the front radar sensor has been modified.
09-027-20-37032020-09-01. Service bulletin. SEATS. Some customers may complain about a squeaking noise when sliding the front seat. This is caused by a deformed front seat side bolster that rubs on the rear console lid. To eliminate this concern, the shape of the front seats has been changed.
CSP06c2020-09-01. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY. CSP06 - 2019 MAZDA3 MODULE UPDATE FOR CONNECTED SERVICES: On July 6, this campaign was temporarily suspended due to software programming concerns. The concern was identified and the fix has been implemented in MDARS and validated by several dealerships on July 15. Effective immediately the CSP06 campaign is re-activated, and all affected VINs will show as open in the Warranty Vehicle Inquiry screen located in eMDCS. Please repair all affected new and used inventory at your dealership and program all affected customer vehicles as they come in for service. Important: Updated repair procedures have been posted to MGSS. Please ensure your teams use the most updated repair procedures available in MGSS under this CSP. Please have your Service Advisors and BDC employees review the customer communication from MarketingService Advisors and BDC Employees and share this specific information with the customer after the vehicle has been updated under CSP (06).
09-023-20-3723a2020-09-01. Service bulletin. FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY. Some vehicles may exhibit a deformed fuel-filler lid panel (1) attached to the fuel-filler lid box, resulting in a poor appearance.This concern is caused by the lid box not having enough water drainage capability which leads to the accumulation of water inside it. The water then freezes in cold weather and expands or the inner side of the lid panel absorbs the water and swells from long exposure, deforming the lid panel. To eliminate this concern, the shape of the fuel-filler lid box has been modified to have better drainage capability.
01-010-20-37062020-09-01. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL. Some customers may experience a no start because the battery is discharged after the vehicle is parked for more than 8 hours. This may be caused by one or more of the following, resulting in excessive parasitic draw (dark current) on the battery. 1. The vehicle control system may not have gone to sleep because a key fob was left in the vehicle after the ignition switch was turned off and the doors were closed. This is caused by improper BCM control logic which allows a higher parasitic draw (approx. 6A) to continue for approximately 6 minutes until the vehicle control system goes into sleep mode. If the doors are operated frequently for car washing or luggage loading/unloading etc., it prevents the vehicle control system from sleeping during that time. 2. The parking lights may have been left on because the warning sound for lights on is a short ding, and it may not be noticed. 3. [With Full-Auto A/C] The heater control unit may not have gone to sleep because the hazard warning switch was pressed after the ignition was turned off. This is caused by improper control logic of the heater control unit.
CSP06b2020-08-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY. CSP06 - 2019 MAZDA3 MODULE UPDATE FOR CONNECTED SERVICES: On July 6, this campaign was temporarily suspended due to software programming concerns. The concern was identified and the fix has been implemented in MDARS and validated by several dealerships on July 15. Effective immediately the CSP06 campaign is re-activated, and all affected VINs will show as open in the Warranty Vehicle Inquiry screen located in eMDCS. Please repair all affected new and used inventory at your dealership and program all affected customer vehicles as they come in for service. Important: Updated repair procedures have been posted to MGSS. Please ensure your teams use the most updated repair procedures available in MGSS under this CSP. Please have your Service Advisors and BDC employees review the customer communication from Marketing “Service Advisors and BDC Employees” and share this specific information with the customer after the vehicle has been updated under CSP (06).
CSP06a2020-08-05. Service bulletin. SUSPENSION. CSP06 - 2019 MAZDA3 MODULE UPDATE FOR CONNECTED SERVICES: On July 6, this campaign was temporarily suspended due to software programming concerns. The concern was identified and the fix has been implemented in MDARS and validated by several dealerships on July 15. Effective immediately the CSP06 campaign is re-activated, and all affected VINs will show as open in the Warranty Vehicle Inquiry screen located in eMDCS. Please repair all affected new and used inventory at your dealership and program all affected customer vehicles as they come in for service. Important: Updated repair procedures have been posted to MGSS. Please ensure your teams use the most updated repair procedures available in MGSS under this CSP. Please have your Service Advisors and BDC employees review the customer communication from Marketing “Service Advisors and BDC Employees” and share this specific information with the customer after the vehicle has been updated under CSP (06).
CSP062020-08-05. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:SOFTWARE. CSP06 - 2019 MAZDA3 MODULE UPDATE FOR CONNECTED SERVICES: On July 6, this campaign was temporarily suspended due to software programming concerns. The concern was identified and the fix has been implemented in MDARS and validated by several dealerships on July 15. Effective immediately the CSP06 campaign is re-activated, and all affected VINs will show as open in the Warranty Vehicle Inquiry screen located in eMDCS. Please repair all affected new and used inventory at your dealership and program all affected customer vehicles as they come in for service. Important: Updated repair procedures have been posted to MGSS. Please ensure your teams use the most updated repair procedures available in MGSS under this CSP. Please have your Service Advisors and BDC employees review the customer communication from Marketing “Service Advisors and BDC Employees” and share this specific information with the customer after the vehicle has been updated under CSP (06).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.