WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

827 on file from NHTSA, as of 2026-10-19.

About U2050 on the 2019 Mazda Mazda3: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

By topic

Only bulletins with trouble code: U2050 are shown. Show all

Bulletins, newest first
SA-038-212021-06-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver.
09-013-20-36632021-01-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message, In-Vehicle Network Malfunction, displayed in the multi-information display.
SA-003-20e2020-12-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver. This is caused by a communication error between the telematics communication unit (TCU) and BCM when the control software in them are not of the version being ready for activation of the connected service.
09-013-20-3663c2020-12-03. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:SOFTWARE. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message “In-Vehicle Network Malfunction” displayed in the multi-information display. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified.
09-013-20-3663b2020-11-04. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message “In-Vehicle Network Malfunction” displayed in the multi-information display. • Japan built vehicles: BDGF-67CK2-B or later suffix. • Mexico built vehicles: BDTS-67CK2-A or later suffix. NOTE: The Description for DTC U2050:55-TCU will be added to MGSS. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified. When you encounter this concern, reprogram (update) the BCM and the CMU to the latest version.
SA-003-20d2020-10-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver. This is caused by a communication error between the telematics communication unit (TCU) and BCM when the control software in them are not of the version being ready for activation of the connected service.
09-013-20-3663a2020-06-02. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message In-Vehicle Network Malfunction displayed in the multi-information display. Japan built vehicles: BDGF-67CK2-B or later suffix. Mexico built vehicles: BDTS-67CK2-A or later suffix. NOTE: The Description for DTC U2050:55-TCU will be added to MGSS. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified.
09-013-20-36632020-05-04. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message "In-Vehicle Network Malfunction" displayed in the multi-information display. - Japan built vehicles: BDGF-67CK2-B or later suffix. - Mexico built vehicles: BDTS-67CK2-A or later suffix. NOTE: The Description for DTC U2050:55-TCU will be added to MGSS. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified. When you encounter this concern, reprogram (update) the BCM and the CMU to the latest version.
SA-003-20c2020-04-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver. This is caused by a communication error between the telematics communication unit (TCU) and BCM when the control software in them are not of the version being ready for activation of the connected service
SA-003-20b2020-02-29. Service bulletin. ELECTRICAL SYSTEM. When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver.This is caused by a communication error between the telematics communication unit (TCU) and BCM when the control software in them are not of the version being ready for activation of the connected service.
SA-003-20a2020-02-27. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; ELECTRICAL SYSTEM. When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver.This is caused by a communication error between the telematics communication unit (TCU) and BCM when the control software in them are not of the version being ready for activation of the connected service.
SA-003-202020-01-30. Service bulletin. ELECTRICAL SYSTEM. DTC U2050:55 STORED AFTER REPLACING OR REPROGRAMMING BCM:When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver.
SA-055-192019-12-21. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. Some vehicles may store DTC U2050:55 (Activation of remote control not implemented) after a BCM software update. Follow the repair procedure when this issue occurs.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.