Service bulletin CSP06c
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10179082 |
| Published by NHTSA | 2020-09-01 |
| Manufacturer's number | CSP06c |
| Manufacturer's date | 2020-08-31 |
| NHTSA component | ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT ADAPTIVE/MOBILITY |
NHTSA's summary
CSP06 - 2019 MAZDA3 MODULE UPDATE FOR CONNECTED SERVICES: On July 6, this campaign was temporarily suspended due to software programming concerns. The concern was identified and the fix has been implemented in MDARS and validated by several dealerships on July 15. Effective immediately the CSP06 campaign is re-activated, and all affected VINs will show as open in the Warranty Vehicle Inquiry screen located in eMDCS. Please repair all affected new and used inventory at your dealership and program all affected customer vehicles as they come in for service. Important: Updated repair procedures have been posted to MGSS. Please ensure your teams use the most updated repair procedures available in MGSS under this CSP. Please have your Service Advisors and BDC employees review the customer communication from MarketingService Advisors and BDC Employees and share this specific information with the customer after the vehicle has been updated under CSP (06).
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Equipment and accessories, Software
| MAZDA MAZDA3 | 2019 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SA-004-22b | 2022-06-04. Service bulletin. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. |
|---|---|
| SA-003-22d | 2022-04-06. Service bulletin. Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. *DO NOT perform BCM software update with MDARS until further notice. *This SA will be updated with the newest repair information as it becomes available. |
| SA-003-20f | 2021-01-06. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF |
| SA-031-20j | 2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF |
| SA-031-20i | 2020-12-04. Service bulletin. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF |
| 09-013-20-3663c | 2020-12-03. Service bulletin. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message “In-Vehicle Network Malfunction” displayed in the multi-information display. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified. |
| 09-013-20-3663b | 2020-11-04. Service bulletin. When the Telematics Communication Unit (TCU) has been replaced or reprogrammed and the software is updated to ones shown below, DTC U2050:55-TCU (Activation of remote control not implemented) may be stored in memory with the message “In-Vehicle Network Malfunction” displayed in the multi-information display. • Japan built vehicles: BDGF-67CK2-B or later suffix. • Mexico built vehicles: BDTS-67CK2-A or later suffix. NOTE: The Description for DTC U2050:55-TCU will be added to MGSS. This is caused by a communication error between the TCU, the Connectivity Master Unit (CMU), and the Body Control Module (BCM) when the control software in them are not of the version being ready for activation of connected service. To correct this concern, the control software of the TCU, CMU and BCM have been modified. When you encounter this concern, reprogram (update) the BCM and the CMU to the latest version. |
| 07-005-20-3745 | 2020-11-03. Service bulletin. Some customers may complain that the A/C blows warm air while idling after restarting a warm engine. This is caused by improper control software of the PCM not allowing the active air shutter to open properly, resulting in lower cooling performance at idle. To eliminate this concern, the control software of the PCM has been modified. |
| 16-001-20-3683c | 2020-11-03. Service bulletin. AUDIO, NAVIGATION AND PHONE CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GENERATION MODELS). Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). NOTE: Device compatibility can be found at connect.mazda.com - Support - Compatibility. |
| 16-001-20-3683b | 2020-11-03. Service bulletin. AUDIO, NAVIGATION AND PHONE CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GENERATION MODELS). Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). NOTE: Device compatibility can be found at connect.mazda.com - Support - Compatibility. 16-001-20-3683c |