Service bulletins for the 2021 Ford Mustang Mach-E
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
329 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Automatic transmission are shown. Show all
| TSB 23-2399 | 2024-01-05. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2023 Mustang Mach-E vehicles may exhibit a condition where the high voltage battery stops charging when connected to level 1 or level 2 chargers with an illuminated malfunction indicator lamp (MIL) and diagnostic trouble code (DTC) P2C94 stored in the secondary on-board diagnostic control module A (SOBDM). This may be due to the software in the SOBDM. To correct this condition, follow the Service Procedure to reprogram the powertrain control module (PCM). |
|---|---|
| TSB 23-2168 | 2023-06-01. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; UNKNOWN OR OTHER; ELECTRICAL SYSTEM:SOFTWARE. Some 2021-2022 Mustang Mach-E vehicles equipped with all-wheel drive (AWD) may exhibit a whine noise from the front drive unit when driving steady speed between 30-40 mph (48-64 km/h) without diagnostic trouble codes (DTCs) present. This may be due to software parameters. To correct the condition, follow the Service Procedure to reprogram the powertrain control module (PCM) |
| TSB 21-2405 | 2021-12-01. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021 Mustang Mach-E vehicles built on or before 09-Sep-2021 may exhibit an illuminated powertrain malfunction indicator (wrench) lamp and/or display the message Shift System Fault Service required with DTC U0103:87 stored in the secondary on board diagnostic module (SOBDMC). Some vehicles may also exhibit DTCs U0100:00, U0121, U0140, and/or U0155 stored in the gear shift module (GSM). This may be due to the software in the GSM. To correct the condition, follow the Service Procedure to reprogram the GSM. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.