WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

336 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
TSB 26-22942026-07-13. Service bulletin. POWER TRAIN. This bulletin supersedes 26-2066. Reason for update: To remove "(2024 only)" from the Issue statement to include 2021-2025 vehicles that may exhibit a clicking sound coming from the gear shift lever. Some of the vehicles listed in the Model statement above equipped with a console GSM may exhibit at least one of the following conditions: * Clicking sound coming from the gear shift lever after it is placed and kept in reverse, neutral or drive position. * Gear shift lever stuck in park * Gear shift lever will not shift into park * Gear shift lever will not shift out of gear * Gear shift lever will not stow/unstow * Gear shift lever will move past the park position * Loose gear shift lever arm at pivot * Illuminated powertrain malfunction (wrench) indicator with DTCs P0929:77, P0929:00, P0929:07 and/or P0929:9A stored in the GSM This may be due to the GSM. Note: If the gear shifter lever will not shift into park, the transmission will automatically shift into park when the return to park function is triggered.
TSB 26-23042026-07-06. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This bulletin supersedes 25-2383. Reason for update: to add 2023-2026 F-150 2.7L vehicles. Some of the vehicles listed in the Model Statement may exhibit a vibration/shudder felt during light throttle tip in at highway speeds (8,9,10 gear) with no diagnostic trouble codes (DTC) present. This may be due to various software parameters in the powertrain control module (PCM).
TSB 26-23092026-07-01. Service bulletin. POWER TRAIN. This bulletin supersedes 26-2241. Reason For Update: update the parts list to correct the claim quantity of the part number JB3Z-4B496-B from 3 to 6. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Harsh 3-4, 4-5 upshifts * Harsh 5-3, 4-3 downshifts * Harsh reverse engagements These symptoms may be worse when cold. This may be due to the F clutch friction plates brinelling into the clutch and planetary container cylinder (7B177).
25L052026-07-01. Other. UNKNOWN OR OTHER. Certain 2024-2025 Model Year F-150 Vehicles Equipped with 2.7L Engine Vehicle Emission Control Information (VECI) Label Update
TSB 26-22972026-06-29. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some of the vehicles listed in the model statement above equipped with SYNC4 may experience a blank center display screen or black center display after welcome animation. The rear-view camera will still function when shifting the vehicle to reverse under these conditions.
SSM 549412026-06-23. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2022-2024 F-150 vehicles equipped with a perimeter alarm may exhibit a false alarm activation intermittently. This may be due to the software in the body control module (BCM). Monitor the BCM alarm event parameter identifications (PID). If ALARM_EVT_1/2/3/4 show a value of Intrusion Sensor, reprogram the BCM using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 15604 and labor operations 12651D and BCM.
SSM 549402026-06-22. Service bulletin. UNKNOWN OR OTHER; SERVICE BRAKES. Some 2021-2026 F-150 vehicles may exhibit a U2100:00 diagnostic trouble code (DTC) for initial configuration incomplete stored in the trailer control module (TRM). This may be due to the vehicle having a Ford accessory trailer brake kit installed without being programmed following the included instructions. If the vehicle was built with minor feature code FDDAA and a trailer brake gain switch is present in the stock location in the instrument panel, a Ford Accessory trailer brake kit has been installed on the vehicle. If a Ford Accessory trailer brake kit is present, download and run the "TRM - Towbar Configuration" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS).
TSB 26-22812026-06-15. Service bulletin. UNKNOWN OR OTHER; POWER TRAIN. This bulletin supersedes 26-2091. Reason for update: To update the production cutoff date for Transit vehicles. Some of the vehicles listed in the Model statement above may exhibit an illuminated MIL with DTC P2C90 stored in the powertrain control module (PCM). This may be due to the software in the PCM.
TSB 26-22642026-06-15. Service bulletin. SUSPENSION. Some of the vehicles listed in the Model Statement above may exhibit a clunking noise from the rear suspension while turning at low speeds. This may be due to binding at the leaf spring clinch clips.
ECG-26.2.11.5 F-1502026-06-13. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: - Updates the connectivity settings to remove an outdated ePrivacy sub-menu, ensuring all displayed options are active and relevant."
ACM-26.S F-1502026-06-12. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: -Addresses a potential communication condition that may result in a loss of radio audio.
TSB 26-22632026-06-05. Service bulletin. POWER TRAIN. This bulletin supersedes 26-2112. Reason For Update: add 2026 model year vehicles, update LV fluid XT-10-QLVC and CXT-10-LV6 description to add "Transfer Case Fluid 4WD Only", and update Step 4 to inspect/replace 7H351 and 7B177 outside of this article. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: - No upshift past second gear - Unable to achieve third gear ratio - Illuminated MIL with DTCs P0757 and P2701 This may be due to a damaged one-way clutch (OWC).
SSM 548772026-06-03. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2024-2026 F-150 vehicles may experience a no crank/no start condition and/or display various warning indicators/messages in the instrument panel cluster (IPC), including but not limited to, "Pre-Collision Assist Not Available", "Hill Start Assist Not Available", "Pre-Collision Assist Fault", and/or "Service AdvanceTrac". The vehicle may also have multiple communication fault diagnostic trouble codes (DTC) related to the high-speed control area network 2 (HS-CAN2) and the flexible data rate control area network (FD-CAN) modules and/or the entire network may be unresponsive. This may be due to improperly seated connector and/or a pin fit condition in connector C210. <br /><br /> If the vehicle exhibits the above conditions, access and inspect connector C210 for proper attachment, pin fit, and/or damage and repair as necessary. This connector can be accessed by removing the glovebox from its hinge. Refer to Workshop Manual (WSM), Section 412-00 Climate Control System - General Information > Removal and Installation > Cabin Air Filter and perform Steps 1 and 2. If the fault persists, refer to WSM, Sec
SSM 548742026-06-03. Service bulletin. EXTERIOR LIGHTING; FUEL/PROPULSION SYSTEM. Some 2024-2026 F-150 vehicles may exhibit an incorrect fuel gauge indication when distance to empty (DTE) is below 50 miles. Workshop Manual (WSM), Sections 413-01 > Description and Operation > Instrument Panel Cluster (IPC) - System Operation and Component Description along with 413-01 > Diagnosis and Testing > Pinpoint Test D have been updated for this concern.
SSM 548842026-06-03. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2024 F-150 vehicles may exhibit a condition where the volume is limited to 14 with a "MyKey volume limited" message in the center display screen. To resolve this concern, disconnect the vehicle's 12-volt battery cables for 10 minutes and reconnect. For hybrid vehicles, disconnect the vehicle's primary 12-volt battery and the auxiliary battery located under the rear seat. Refer to Workshop Manual (WSM), Section 414-01. For claiming, use causal part 10849 and labor operation 10654C.
SSM 548382026-05-26. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM. Some 2024 F-150 vehicles may exhibit a condition where the volume is limited to 14 with a "MyKey volume limited" message in the center display screen. To resolve this concern, disconnect the vehicle's 12-volt battery cables for 10 minutes and reconnect. For hybrid vehicles, disconnect the vehicle's primary 12-volt battery and the auxiliary battery located under the rear seat. Refer to Workshop Manual (WSM), Section 414-01. If a battery reset does not resolve this solution inform customers that engineering is currently working on a solution. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If a customer's vehicle exhibits this concern, submit a Vehicle Concern Report. To submit a report, click on the "Submit Global Concern Report (GCR)" link at the upper right of the PTS Vehicle ID screen (vehicle identification number ÝVIN¨ required) and fill out the form. Include the article number of this message in the text of the form. Do not use the "Report A Problem" link to submit a report for this condition.
SSM 548242026-05-19. Service bulletin. POWER TRAIN. Some 2023-2026 F-150 Raptor R vehicles may experience an intermittent extended crank condition when starting the vehicle with no powertrain related diagnostics trouble codes (DTC) stored in the powertrain control module (PCM). This condition will not prevent the vehicle from starting. This may be due to the software in the PCM. This condition does not affect vehicle durability, and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected by the end of Q3 2026. Replacement or reprogramming of the PCM will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. <br /><br /> If a vehicle exhibits this concern, click on the "Submit Global Concern Report (GCR)" link at the upper right of the PTS Vehicle ID screen (vehicle identification number ÝVIN¨ required) and fill out the form. Do not use the "Report A Problem"
TSB 26-22412026-05-18. Service bulletin. POWER TRAIN. This bulletin supersedes 25-2587. Reason For Update: update the Parts list to add the F-clutch friction plates HL3Z-7B164-D and the F-clutch steel plates PR3Z-7B164-A for the proper vehicle lines, replace the transfer case mounting bolt part number from W714288-S438 to W714288-S437, update the part number W720688-S439 quantity from 2 to 1, update the part number ML3Z-7869-C claim quantity from 2 to 1 (only if necessary), update the description of CXT-10-LV6 and XT-10-QLVC by adding "transfer case fluid, 4WD only", move HL3Z-7A191-B and L1MZ-7F396-A fluid pan gaskets to the parts to inspect and replace list, and remove TL1Z-6775-A self adhesive heat shield from the F-150/Expedition/Navigator parts list as it is not a discard item. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Harsh 3-4, 4-5 upshifts * Harsh 5-3, 4-3 downshifts * Harsh reverse engagements These symptoms may be worse when cold. This may be due to the F clutch friction plates brinelling into the clutch and planetary container cylinder (7B177).
TSB 26-22382026-05-18. Service bulletin. POWER TRAIN. This article supersedes TSB 26-2130 to update labor operation to reprogram the PCM and check EVAP system from actual time to fixed time, and add extra time to reprogram coordinated modules (if required). Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450 stored in the powertrain control module (PCM). This may be due to the software in the PCM.
TSB 26-22332026-05-18. Service bulletin. ENGINE. This article supersedes TSB 26-2116 to clarify the prior approval statement. Some of the vehicles listed in the model statement above may exhibit an oil leak from the oil filter adapter to engine block mounting area. This may be due to block porosity or a block crack just below the oil filter adapter near the main bearing cap outer bolt.
TSB 26-22172026-05-14. Service bulletin. ENGINE; POWER TRAIN; EXTERIOR LIGHTING. This bulletin supersedes 24-2441. Reason for update: consolidation of prior bulletins and an update the Service Procedure to diagnose and replace the cylinder head temperature (CHT) sensor with an updated version. Some of the vehicles listed in the Model Statement above may exhibit all of the following conditions: * Illuminated power train malfunction (wrench) indicator/malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1299, P1285 and/or P2C39 stored in the powertrain control module (PCM). * "Engine Over-Temperature" and/or Service Vehicle Soon warning message(s) displayed in the instrument panel cluster (IPC) This may be due to the software in the PCM and/or the CHT sensor. Note: The vehicle's cooling fan will operate normally with no loss of engine coolant.
TSB 26-21852026-05-14. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. This bulletin supersedes 25-2621. Reason for update: add 2026 model year vehicles and Transit, update the causal part number (15604), update the Service Procedure, update the service labor operations for 2023 F-Super Duty, and add service labor operations for Transit. Some vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.
SSM 548032026-05-14. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM; ENGINE; UNKNOWN OR OTHER. Some 2025 Mustang Mach-E vehicles built on or before 30-Jun-2025 and 2024 F-150 Lightning vehicles may exhibit a flashing light on the air conditioning (A/C) button with a lack of heat and/or A/C with diagnostic trouble code (DTC) B1717:06 stored in the heat pump valve control module (HPVCM). This may be due to the software in the HPVCM. To correct the condition, reprogram the HPVCM using the latest software level of the Ford Diagnosis and Repair System (FDRS). If the DTC remains this may be due to the "Heat Pump Vacuum Lock Release Sequence" application performance in the Ford Diagnosis and Repair System (FDRS). The "Heat Pump Vacuum Lock Release Sequence" application has been updated in FDRS to operate properly. For claiming, use causal part 14H266 and labor operations 12651D and 12651D4.
SSM 547292026-05-05. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2024 F-150 vehicles may exhibit a condition where the volume is limited to 14 with a "MyKey volume limited" message in the SYNC screen. To resolve this concern, disconnect the vehicle's 12-volt battery cables for 10 minutes and reconnect. If a battery reset does not resolve this solution inform customers that engineering is currently working on a solution. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If a customer's vehicle exhibits this concern, submit a Vehicle Concern Report. To submit a report, click on the "Submit Global Concern Report (GCR)" link at the upper right of the PTS Vehicle ID screen (vehicle identification number ÝVIN¨ required) and fill out the form. Include the article number of this message in the text of the form. Do not use the "Report A Problem" link to submit a report for this condition. For claiming, use causal part 18C869 and labor operation 10654C.
SSM 547862026-05-05. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2022-2024 F-150 vehicles may exhibit a condition where the intrusion alarm will activate without an external source. This may be due to the software in the body control module (BCM). Reprogramming or replacing the BCM may not resolve this condition. Inform customers that engineering is currently working on a solution for this condition expected by the end of Q2 2026. Inform the customer that the alarm can be disabled every time the ignition is cycled OFF. Refer to the Owner's Manual, "SETTING THE ALARM SECURITY LEVEL" (page 133). Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.