Service bulletin SSM 54941
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11034032 |
| Published by NHTSA | 2026-06-23 |
| Manufacturer's number | SSM 54941 |
| Manufacturer's date | 2026-06-16 |
| NHTSA component | ELECTRICAL SYSTEM; UNKNOWN OR OTHER |
| Manufacturer's system | Body Control Module |
NHTSA's summary
Some 2022-2024 F-150 vehicles equipped with a perimeter alarm may exhibit a false alarm activation intermittently. This may be due to the software in the body control module (BCM). Monitor the BCM alarm event parameter identifications (PID). If ALARM_EVT_1/2/3/4 show a value of Intrusion Sensor, reprogram the BCM using the latest software level of the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 15604 and labor operations 12651D and BCM.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system
| FORD F-150 | 2022, 2023, 2024 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 26V104000 | 2026-02-20. EXTERIOR LIGHTING:TAIL LIGHTS; ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL |
|---|---|
| 25V272000 | 2025-04-23. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY |
| 25V132000 | 2025-02-28. ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL |
| 25V131000 | 2025-02-28. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY |
| 24V144000 | 2024-02-23. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY |
| 23V168000 | 2023-03-15. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY |
| 22V193000 | 2022-03-25. ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 26B07 | 2026-10-02. Other. Recommended Repair Prior to Sale Customer Satisfaction Program 26B07 Certain 2021-2025 Model Year F-150 Lightning and Mustang Mach-E Vehicles Undesired Acceleration Due to Adaptive Cruise Control (ACC) Activation |
|---|---|
| SSM 55208 | 2026-09-30. Service bulletin. Some 2024-2026 F-150, 2025 Explorer/Aviator, 2025-2026 Expedition/Navigator, or 2026 F-Super Duty vehicles may exhibit diagnostic trouble code (DTC) U211B:43:48 stored in the body control module (BCM) when performing a Self-Test. This DTC sets due to an internal BCM timing issue during the self-test process. This specific code has no customer impact and does not cause any drivability concerns or warning messages. Clearing DTC U211B:43:48, reprogramming the BCM, or replacing the BCM is unlikely to prevent this DTC from setting. This DTC does not trigger a condition covered under warranty. Note: This guidance only applies to U211B with the specific failure byte 43 in status 48. Any other trusted real-time operation network (TRON) DTCs or different failure bytes associated with U211B are still applicable and technicians must follow Workshop Manual (WSM) normal diagnostics for those DTCs. |
| SSM 55194 | 2026-09-30. Service bulletin. Some 2021-2024 Mustang Mach-E, 2025-2026 Navigator and 2024 F-150 vehicles may exhibit inoperative welcome/approach detection lights. This may be due to the body control module (BCM) software. To correct the condition, download and run the "BCM - Programmable Module Installation (PMI)" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. If the condition persists after PMI, refer to Workshop Manual (WSM), Section 417-01 for normal diagnostics and repair as necessary outside of this article. For claiming, use causal part 15604 and labor operations 12651D and BCM. |
| TCU-26.2.12.2.2 Mach E, F | 2026-09-21. Over-the-air update. Quality improvements include: -Addresses a bug that may cause updates to fail |
| ECG-26.2.12.3 F-150LtMac | 2026-09-21. Over-the-air update. Quality improvements include: -ePrivacy enhancements |
| SYNC-26.2.8.5 F-150 | 2026-09-14. Over-the-air update. 26C37 Recall remedy Prevents a potential rearview camera image obstruction caused by a menu displaying on top of it |
| TSB 26-2391 | 2026-09-12. Service bulletin. This bulletin updates 26-2206. Reason for update: update the Service Procedure to revise Steps 19-21, adding Step 22, and adding Figure 15-16 to clarify connector C316 location. Some of the vehicles listed in the Model statement above may exhibit diagnostic trouble codes (DTCs) C1001:31, U3000:89, and/or U3000:49 stored in the image processing module A (IPMA) and at least one of the following conditions: "Front Camera Fault Service Required" message Pre-collision assist inoperative Adaptive cruise control inoperative Front windshield camera alignment routine fails to complete This may be due to the coaxial cable between the IPMA camera and the IPMA. |
| ECG-26.2.12.3 Bronco,Esca | 2026-09-11. Over-the-air update. Quality improvements include: -ePrivacy enhancements |
| SSM 55131 | 2026-09-02. Service bulletin. Some 2025-2026 Aviator/Explorer/Expedition/F-150/Mustang Mach-E/Nautilus/Navigator vehicles may exhibit the hands-free BlueCruise feature intermittently/consistently unavailable when BlueCruise is active and when traveling in a "Blue Zone". Speed sign recognition may also be inaccurate. If there are no active relevant diagnostic trouble codes (DTC) present and the issue persists after multiple key cycles and if the BlueCruise System Health Check passes, download and run the "TCU - Reset Telematics Control Unit (TCU) Module" application using the latest software level of the Ford Diagnosis and Repair System (FDRS). If the condition is resolved, inform customers that this may be a temporary fix and engineering is currently working on a solution expected in Q4 2026. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. For claiming, use causal 14G229 and labor operations 12651D and 12651D4. If the condition persists after a test drive, refer to Workshop Manual (WSM), Section 419-03B for normal |
| TSB 26-2395 | 2026-09-01. Service bulletin. This article supersedes 26-2287. Reason for update: update the labor operation numbers to add MT to operations C, F, G, H, J, K, L and M, and correct the part number LIMZ-4A015-B to L1MZ-4A015-B. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: Harsh engagement Delayed engagement Harsh shift Delayed shift Illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC)s P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to axial movement of the CDF clutch cylinder sleeve causing hydraulic circuit leaks. NOTE: If internal transmission service is required to address a concern detected with the CDF clutch cylinder following this article, technicians should carefully inspect and replace other transmission components and flush transmission fluid cooler only as ne |