WenmarOpen by Wenmar Pro

Service bulletin TSB 26-2297

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11034134
Published by NHTSA2026-06-29
Manufacturer's numberTSB 26-2297
Manufacturer's date2026-06-24
NHTSA componentUNKNOWN OR OTHER; ELECTRICAL SYSTEM
Manufacturer's systemCenter Display

NHTSA's summary

Some of the vehicles listed in the model statement above equipped with SYNC4 may experience a blank center display screen or black center display after welcome animation. The rear-view camera will still function when shifting the vehicle to reverse under these conditions.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
FORD BRONCO2021, 2022, 2023, 2024, 2025
FORD BRONCO SPORT2025
FORD EDGE2021, 2022, 2023, 2024
FORD ESCAPE2023, 2024, 2025, 2026
FORD EXPEDITION2022, 2023, 2024
FORD F-1502021, 2022, 2023, 2024, 2025
FORD F-250 SD2023, 2024, 2025, 2026 (the catalog's model; the bulletin names a series or trim of it)
FORD MAVERICK2025
FORD MUSTANG2024, 2025
FORD MUSTANG GTD2026
FORD MUSTANG MACH E2021, 2022, 2023, 2024, 2025
FORD RANGER2024, 2025
LINCOLN CORSAIR2023, 2024, 2025, 2026
LINCOLN NAUTILUS2021, 2022, 2023
LINCOLN NAVIGATOR2022, 2023, 2024

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
26V5820002026-09-09. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE
20264082026-08-25. Electrical
26V5470002026-08-25. ELECTRICAL SYSTEM:WIRING
20263562026-07-20. Electrical
26V4680002026-07-20. ENGINE; ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD
20261902026-04-15. Electrical
26V2390002026-04-14. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:ENGINE BLOCK HEATER
26V2380002026-04-14. STRUCTURE:INTERIOR PANELS:SUN VISOR; ELECTRICAL SYSTEM
26V1650002026-03-18. ELECTRICAL SYSTEM:ADAS; BACK OVER PREVENTION:SOFTWARE
26V1040002026-02-20. EXTERIOR LIGHTING:TAIL LIGHTS; ELECTRICAL SYSTEM: INTEGRATED TRAILER BRAKE CONTROL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SSM 552402026-10-13. Service bulletin. Some 2021-2024 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. This may be due to pin fitment at the brake fluid level sensor connector. To resolve this concern, replace the brake fluid reservoir and replace the brake fluid level sensor electrical connector C1052 with service pigtail wiring kit 3U2Z-14S411-BXAB. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
SSM 552392026-10-13. Service bulletin. Some 2023-2026 F-Super Duty vehicles equipped with a trailer brake control module and built on or before 08-May-2026 may exhibit a "Trailer Disconnected" message after cycling the ignition off and back on with a trailer connected. This may be due to the presence of an integrated battery charger on a trailer equipped with electric over hydraulic brakes. If trailer functionality is restored after unplugging and plugging the trailer connector back in while the ignition is on, this condition can be corrected by downloading and performing the "Trailer Brake Configuration" application using the latest software version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19H332 and labor operations 12651D and 12651D4. Workshop Manual (WSM), Section 417-01 Exterior Lighting > Diagnosis and Testing > Trailer Lamps > Pinpoint Test G The Message Center Displays A False Trailer Disconnected Message When A Trailer Is Connected To The Vehicle - Only For Electric Over Hydraulic (EOH) Equipped Trailers When Vehicle Trailer Brake Type Setting Is Set To Electric Over Hydraulic has bee
SSM 552372026-10-13. Service bulletin. Some 2025-2026 Mustang GTD vehicles built on or before 28-Sep-2026 may exhibit one or more of the following hydraulic system warning messages displayed in the instrument panel cluster (IPC): "Suspension Fault Speed Limited to 80 MPH", "Driver Selectable Suspension Fault", "Front Lift Not Available", "Drive Mode Not Available" and/or "Active Aero Fault". Diagnostic trouble codes (DTC) U0037, U0759, U075A, U075B, U075C, C0086, U0416, C1041, C1119, C1A03:A2, C1A04:A2, C1A05:A2, C1A06:A2, and/or P0EA7:19 may also be stored in the vehicle dynamics module (VDM) and/or powertrain control module (PCM). <br/><br/> This condition may be caused by VDM software that incorrectly detects or reports a suspension or hydraulic system fault. To correct the condition, reprogram the VDM using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 18B008 and labor operations 12651D and 12651D4.
SSM 552212026-10-12. Service bulletin. For 20222026 vehicles equipped with a 8F35 transmission, a revision to the Road Testing Vehicle procedure has been made in the WSM, Section 307-01 > Diagnosis and Testing. This updated procedure improves the diagnosis of customer reported transmission concerns and aids in locating the proper root cause. During diagnosis and testing, details regarding whether the condition is more prevalent when the vehicle is hot or cold, throttle percentage at the time of occurrence, vehicle speed, the specific shift involved, and whether the issue occurs during transmission engagements (N>R, N>D, R>D, and/or D>R) should be noted in the warranty claim. Engineering requests including these detailed operating conditions that will significantly assist with root cause analysis. Diagnosis, testing, and repair should use established labor times outside this article.
TSB 26-23252026-10-05. Service bulletin. Some of the vehicles listed in the Model statement above may exhibit a front courtesy lamp that is inoperative. This may be due to a concern with the front courtesy lamp light module.
26B072026-10-02. Other. Recommended Repair Prior to Sale Customer Satisfaction Program 26B07 Certain 2021-2025 Model Year F-150 Lightning and Mustang Mach-E Vehicles Undesired Acceleration Due to Adaptive Cruise Control (ACC) Activation
TSB 26-24282026-10-02. Service bulletin. This bulletin supersedes 25-2326. Reason for update: update the service procedure to include the fuel tank isolation valve replacement, update the causal part number, and increase the labor time allowance to include the fuel tank isolation valve replacement. Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450 stored in the powertrain control module (PCM). This may be due to the software in the PCM and/or the fuel tank isolation valve.
TSB 26-24282026-10-02. Service bulletin. This bulletin supersedes 25-2326. Reason for update: update the service procedure to include the fuel tank isolation valve replacement, update the causal part number, and increase the labor time allowance to include the fuel tank isolation valve replacement. Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450 stored in the powertrain control module (PCM). This may be due to the software in the PCM and/or the fuel tank isolation valve.
SSM 552082026-09-30. Service bulletin. Some 2024-2026 F-150, 2025 Explorer/Aviator, 2025-2026 Expedition/Navigator, or 2026 F-Super Duty vehicles may exhibit diagnostic trouble code (DTC) U211B:43:48 stored in the body control module (BCM) when performing a Self-Test. This DTC sets due to an internal BCM timing issue during the self-test process. This specific code has no customer impact and does not cause any drivability concerns or warning messages. Clearing DTC U211B:43:48, reprogramming the BCM, or replacing the BCM is unlikely to prevent this DTC from setting. This DTC does not trigger a condition covered under warranty. Note: This guidance only applies to U211B with the specific failure byte 43 in status 48. Any other trusted real-time operation network (TRON) DTCs or different failure bytes associated with U211B are still applicable and technicians must follow Workshop Manual (WSM) normal diagnostics for those DTCs.
SSM 551942026-09-30. Service bulletin. Some 2021-2024 Mustang Mach-E, 2025-2026 Navigator and 2024 F-150 vehicles may exhibit inoperative welcome/approach detection lights. This may be due to the body control module (BCM) software. To correct the condition, download and run the "BCM - Programmable Module Installation (PMI)" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. If the condition persists after PMI, refer to Workshop Manual (WSM), Section 417-01 for normal diagnostics and repair as necessary outside of this article. For claiming, use causal part 15604 and labor operations 12651D and BCM.