WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Ford Mustang Mach-E

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

88 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
26B072026-10-02. Other. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Recommended Repair Prior to Sale Customer Satisfaction Program 26B07 Certain 2021-2025 Model Year F-150 Lightning and Mustang Mach-E Vehicles Undesired Acceleration Due to Adaptive Cruise Control (ACC) Activation
SSM 551942026-09-30. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING; UNKNOWN OR OTHER. Some 2021-2024 Mustang Mach-E, 2025-2026 Navigator and 2024 F-150 vehicles may exhibit inoperative welcome/approach detection lights. This may be due to the body control module (BCM) software. To correct the condition, download and run the "BCM - Programmable Module Installation (PMI)" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. If the condition persists after PMI, refer to Workshop Manual (WSM), Section 417-01 for normal diagnostics and repair as necessary outside of this article. For claiming, use causal part 15604 and labor operations 12651D and BCM.
TSB 26-24212026-09-21. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; POWER TRAIN. This bulletin updates 25-2622. Reason for update: * Update the Service Procedure to: - Remove Step related connecting a battery charger - Add Step 7 and Step 29 along with Figure 4 to include mass damper remove and install. * Update the Parts list: - Updated to include rear electric drive assembly studded bolts and nuts to secure the mass damper. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Stuck in park * "Service Vehicle Soon" message in the instrument panel cluster (IPC) * Illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P07E6:71 stored in the secondary on-board diagnostic control module C (SOBDMC) This may be due to high ground resistance of the park pawl motor.
TCU-26.2.12.2.2 Mach E, F2026-09-21. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: -Addresses a bug that may cause updates to fail
ECG-26.2.12.3 F-150LtMac2026-09-21. Over-the-air update. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Quality improvements include: -ePrivacy enhancements
SSM 549952026-07-29. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM. Some 2023-2026 Mustang Mach-E vehicles equipped with a lithium iron/ion phosphate (LFP) standard range battery (minor feature code HTHAH) may exhibit a battery energy control module (BECM) state of health reading that over-estimates the actual high voltage battery state of health after a BECM replacement directed by the Workshop Manual (WSM). This may be due to the software in the BECM. To correct this condition, download and run the "BECM-High Voltage Battery Capacity Relearn" application using the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 10B687 and labor operations 12651D and 12651D4. The engineering team is currently working on a permanent software solution which is expected to be available in Q4 of 2026. If a vehicle exhibits this concern, submit a Global Concern Report (GCR). To submit a report, click on the "Submit Global Concern Report (GCR)" link at the upper right of the Professional Technician System (PTS) Vehicle ID screen (vehicle identification number ÝVIN¨ required) and fill out the form. Do not use the "Report A Problem" link to submit a report for
SSM 550312026-07-28. Service bulletin. UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM. Some 2021-2026 Ford/Lincoln vehicles may exhibit various symptoms including but not limited to the auto start/stop system not operating as intended with a "Check Charging System" message in the instrument panel cluster (IPC) while the charging system is operating properly with no charging related diagnostic trouble codes (DTC) stored. This may be due to someone using an aftermarket programmer to change the body control module (BCM) configuration to disable the auto start/stop system or perform other unsupported programming modifications. To correct this condition on F-150 and Bronco vehicles, download and run the Ford Diagnosis and Repair System (FDRS) application titled "BCM-Charging System Configuration Correction". Running this application will determine if the BCM configuration was modified by the customer and if so, provide the option to return the configuration back to factory settings. For other vehicle models exhibiting concerns related to unsupported aftermarket BCM programming, submit a Technical Support Request (TSR) requesting support to revert the BCM configuration
SSM 550282026-07-28. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2024 Ford and Lincoln vehicles may exhibit an "Updating SYNC" message on the vehicle center display screen after an over the air (OTA) update. The message can be cleared from the center display screen and SYNC can be used normally, but it will re-appear at every subsequent ignition cycle. Inform customers that engineering is currently working on a software update solution for this condition to be delivered OTA expected in late Q3 2026. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Monitor Professional Technician System (PTS) for additional information.
SSM 550082026-07-20. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY/WIPER; SEATS; UNKNOWN OR OTHER. Some 2021-2026 Ford vehicles may exhibit inoperative heated/cooled seats, heated steering wheel and/or front/rear defrost features after a remote start is performed through the Ford mobile application or with the key fob. Customers may also experience heated/cooled seats, heated steering wheel and/or front/rear defrost features turning on in unexpected conditions such as during warmer weather. These features will operate normally when commanded in the center display screen. This may be due to the customer not setting up their "Climate Settings" through the Ford mobile application. To correct this condition, inform the customer they should perform a remote start from the Ford mobile application and then adjust the "Climate Settings" in the Ford mobile application as desired. These settings only need to be set once and will persist through subsequent remote starts. Heated and cooled seats will be set to Level 2 when turned ON via "Climate Settings" in the Ford mobile application during a remote start event. This is normal operating characteristic. This condition does not affect vehicle durability and no a
TSB 26-23242026-07-20. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some of the vehicles listed in the Model statement above may exhibit a distorted or muffled sound originating from the center speaker. This may be due to a deformed speaker cone.
GSM-26.2651B MachE2026-07-17. Over-the-air update. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Quality improvements include: - Updates the motor short failure detection logic to prevent Diagnostic Trouble Codes
SSM 549912026-07-13. Service bulletin. UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM. Some 2023-2026 Mustang Mach-E vehicles equipped with a lithium iron/ion phosphate (LFP) standard range battery (minor feature code HTHAH) may exhibit a battery energy control module (BECM) state of health reading that over-estimates the actual high voltage battery state of health after a BECM replacement directed by the Workshop Manual (WSM). This may be due to the software in the BECM. To correct this condition, download and run the "BECM-High Voltage Battery Capacity Relearn" application using the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 10B687 and labor operations 12651D and 12651D4. The engineering team is currently working on a permanent software solution which is expected to be available in Q4 of 2026.<br /><br /> If a vehicle exhibits this concern, submit a Global Concern Report (GCR). To submit a report, click on the "Submit Global Concern Report (GCR)" link at the upper right of the Professional Technician System (PTS) Vehicle ID screen (vehicle identification number ÝVIN¨ required) and fill out the form. Do not use the "Report A Problem" link to submit
SSM 549792026-07-08. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; VISIBILITY/WIPER. Some 2023-2025 Mustang Mach-E and 2024-2026 F-Super Duty vehicles equipped with a 360-degree camera may exhibit a distorted or corrupted 360-degree camera image in the center display screen, but the rear-view camera image is operating correctly. To restore the 360-degree camera image, download and run the "IPMA - Reset the Image Processing Module A (IPMA) Calibration Data" application using the Ford Diagnosis and Repair System (FDRS) scan tool. Then download and run the "IPMA - 360 Degree View Camera Alignment" application. Inform customers that they can continue to drive the vehicle and engineering is currently working on a software solution for this condition that is expected in Q3 of 2026. Replacement or reprogramming of the IPMA will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If a vehicle exhibits this condition, enter a vehicle identification number (VIN) and click the "Submit Global Concern Report (GCR)" link at the upper right of the PTS
TSB 26-22972026-06-29. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some of the vehicles listed in the model statement above equipped with SYNC4 may experience a blank center display screen or black center display after welcome animation. The rear-view camera will still function when shifting the vehicle to reverse under these conditions.
SSM 549172026-06-16. Service bulletin. ELECTRICAL SYSTEM; STEERING. Some 2021-2024 Mustang Mach-E vehicles may exhibit only continuous memory diagnostic trouble code (DTC) U2016:47 stored in the power steering control module (PSCM) after a self test is performed with the Ford Diagnosis and Repair System (FDRS) scan tool. If the vehicle does not exhibit any observable symptoms such as lack of/reduced power steering assist, disabling of power steering assist features and/or power steering assist fault messages displayed on the instrument panel cluster (IPC), this DTC should be ignored. No further service action is required.
ACM-26.S MachE2026-06-12. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: -Addresses a potential communication condition that may result in a loss of radio audio.
SYNC-26.2.8.3 MachE2026-06-04. Over-the-air update. ENGINE; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: -Privacy robustness updates -Restores the Auto Hold toggle in the controls menu
SSM 548112026-05-14. Service bulletin. EXTERIOR LIGHTING; STRUCTURE:BODY. 2022-2026 Mustang Mach-E vehicles built on or after 03-Jan-2022 are no longer equipped with a hands free liftgate system. The vehicle is not misbuilt. The addition of any parts is not a warrantable repair. Do not submit a claim for this condition.
SSM 547202026-04-10. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
PT-26.13.6 MachE2026-04-06. Over-the-air update. SERVICE BRAKES; UNKNOWN OR OTHER. "25C69 Recall remedy - Updates the Secondary On-Board Diagnostic Module C to provide for release of the Integrated Park Module slider in the event a bind condition occurs allowing park to be engaged."
SYNC-26.2.1.6.5.2 MachE2026-04-02. Over-the-air update. EXTERIOR LIGHTING; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. "26C10 Recall remedy -Addresses instances where the trailer lights and trailer brakes may not function"
SSM 546352026-03-11. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2024-2025 Mustang Mach-E/F-150 vehicles may exhibit a crackling noise from speakers during phone calls when using wireless Apple CarPlay or wireless Android Auto. This may be due to wireless interference. To isolate the wireless interference as a possible cause, turn off the wireless projection application in SYNC Connectivity settings in the vehicle's center touch screen and connect the phone through universal serial bus (USB) cable. If the call quality issue through Apple CarPlay or Android Auto is addressed, this confirms that wireless projection was the cause. Engineering is aware of this condition and working on a software solution expected at the end of Q4 2026. As a temporary solution, customers can connect their phones with a USB cable. Reprogramming or replacement of any modules will not correct the condition. Use the "Submit Global Concern Report (GCR)" link at the upper right of the OASIS report to submit a vehicle concern report if the wireless projection is found to be the cause of the condition.
OBCC-AS.AU MachE2026-03-04. Over-the-air update. ELECTRICAL SYSTEM. Quality improvements include: - Addresses false warnings attributed to the Off-board Charging Module. These warnings occur due to external charging station failures rather than internal module issues.
SSM 545552026-02-12. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY; ELECTRICAL SYSTEM. Some 2020-2022-Corsair, 2021-2023 Nautilus, 2020-2024 Navigator/Aviator, and 2021-2024 Mustang Mach-E vehicles equipped with phone-as-a-key may exhibit various phone-as-a-key concerns with diagnostic trouble codes (DTC) U200D:15, U200E:15, U200F:15, B1589:31/49 through B1598:31/49, B1A56:31/49, B1D55:31/49, and/or B15A5:56 stored in the remote function actuator (RFA) module. If any of these DTCs are detected during diagnostics, clear the DTCs, reprogram the RFA to the latest software level and start a new Ford Diagnosis and Repair System (FDRS) session. Verify that DTCs are no longer present. If only the B1589:31/49 through B1598:31/49, B1A56:31/49, B1D55:31/49, and/or B15A5:56 DTCs return in the RFA after a self-test, follow normal Workshop Manual (WSM) diagnostics in Section 419-01. Repair as necessary outside of this article. For claiming, use causal part 14G617 and labor operations 12651D and 12651D4.
TSB 25-26222026-01-21. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM; POWER TRAIN. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Stuck in park * "Service Vehicle Soon" message in the instrument panel cluster (IPC) * Illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P07E6:71 stored in the secondary on-board diagnostic control module C (SOBDMC) This may be due to high ground resistance of the park pawl motor.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.