WenmarOpen by Wenmar Pro

Service bulletins for the 2017 MINI Clubman

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

139 on file from NHTSA, as of 2026-10-19.

By type

By component

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
SIM0104152022-07-05. Service bulletin. ENGINE AND ENGINE COOLING. MINI Engine oil: repair order invoicing procedure - For covered repairs, effective with repair/claim dates on or after August 1, 2017 Warranties will only reimburse in exact quantities - the 1/10 liter "billing part numbers" for the applicable bulk engine oil (tanker or drum) that is needed after the completion of an engine repair (partial or full) or when an "Engine oil" maintenance service task is performed.
SIM6401222022-07-05. Service bulletin. ENGINE AND ENGINE COOLING. Mist formation on the windscreen inner surface may occur at departure or after MSA (automaticstart/stop). Acoustic abnormality in the area of the recirculated air flap (recirculation flap closing and opening several times). The above may occur individually or in combination.
M6402212021-12-13. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM; ELECTRICAL SYSTEM. Different air temperatures are felt from left to right out of the front fresh air grilles (air vents).
M0105202020-09-14. Service bulletin. ENGINE AND ENGINE COOLING. B46M ENVIRONMENTAL AIR CATALYST SENSOR - LTD WTY EXT TO 15 YEARS/150,000 MILES: Component/Issue-Specific Limited Warranty Extension For the eligible vehicles, MINI USA, a division of BMW of North America, LLC ("MINI USA") is extending the limited warranty for the engine radiator's Environmental Air Catalyst (EAC) sensor (shown) to: 15 years/150,000 miles as determined by the vehicle's original in-service date.
M1301202020-06-15. Service bulletin. FUEL SYSTEM, GASOLINE; POWER TRAIN; ENGINE AND ENGINE COOLING. TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor tank vent valve signal: fixed FC 118001 - Mixture control: mixture too lean FC 118401 - Mixture control: mixture too lean large deviation CAUSE Internal mechanical defect in the tank ventilation valve. The defect can also result in a very loud clicking noise when the valve is cycling.
M6201192020-04-27. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE; ELECTRICAL SYSTEM. CENTRAL INSTRUMENT PANEL LED SURROUND RING DOES NOT ILLUMINATE WHEN IGNITION IS TURNED ON: This Service Information Bulletin (Revision 2) replaces SI M62 01 19 dated January 2019.The central instrument's outer perimeter LED ring (arrows) does not illuminate when switching on the ignition or with the engine start-stop button. It only illuminates after direct actuation of a component (e.g. setting the temperature radio volume etc.). F57 shown; other models similar Software error in the Automotive Pixel Link driver (APIX driver). APIX is the serial high-speed Gigabit multichannel link that connects displays such as the LED ring with vehicle control modules.
M6102202020-04-27. Service bulletin. ELECTRICAL SYSTEM; STEERING; SUSPENSION; ENGINE; SERVICE BRAKES. CHECK CONTROL MESSAGES FOR BRAKE SUSPENSION AND AIR BAG SYSTEM MALFUNCTION: Multiple check control messages (CCM) can display for brake suspension and air bag system malfunction. The customer may also complain about any of the following: Engine can no longer be switched off Drive position (D) cannot be engaged on the gear selector switch (GWS) Reduction of steering assist After an engine emergency shut-off (either a prolonged long press; or 3 consecutive short presses of the Start/Stop button) and the vehicle going to sleep (identifiable by the lighting of the "Start/Stop button") everything resumes normal functionality and the CCM messages no longer appear. When performing a vehicle test the following diagnostic fault codes are stored in the BDC: CD0420 - "error of Flexray controller on Flexray bus" D91FF9 - "Flexray message data drivetrain 2 (DT_PT_2): Timeout" This message may be read out in the ZGM control unit or Body Domain Controller CAUSE Software in the Body Domain Control unit (BDC).
M2203172020-04-27. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. CREAKING NOISE FROM THE LOWER ENGINE AREA: This Service Information Bulletin (Revision 1) replaces SI M22 03 17 dated January 2018. During load reversal or taking off from a stop there is a creaking or droning noise heard from the lower engine area. CAUSE The bushing in the lower engine stabilizer link is working its way out of its aluminum housing thereby rubbing against the engine oil pan. The bushing in the lower engine stabilizer link (1) is working its way out of its aluminum housing. The aluminum housing starts to rub against the engine oil pan (2).
M6401162020-03-16. Service bulletin. ENGINE AND ENGINE COOLING. WATER INGRESS IN FOOTWELL AREA FROM A/C CONDENSATE DRAIN: This Service Information Bulletin (Revision 1) replaces SI M64 01 16 dated September 2016. The condensate drain hose is blocked by the heat shield - The condensate drain hose is not attached properly to the housing - The condensate drain hose was damaged during installation or previous repair.
M1101202020-02-18. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. MALFUNCTION INDICATOR LAMP IS ILLUMINATED WITH A CRANKSHAFT ADAPTION FAULT: When diagnosing an illuminated malfunction indicator lamp (MIL) and/or a different issue the following fault may also be stored in the Digital Motor Electronics (DME). Fault code Control module Fault code text 213A2B DME Increment wheel adaption faulty This situation is not associated with any drivability complaints and only affects vehicles built with a Factory I-level of 19-07-500 and later. An unfavorable DME diagnostic calibration may cause the fault code to be stored. In most circumstances this will cause the MIL to be illuminated.
M2203172020-01-21. Service bulletin. ENGINE. CREAKING NOISE FROM THE LOWER ENGINE AREA: During load reversal or taking off from a stop there is a creaking or droning noise heard from the lower engine area. CAUSE The bushing in the lower engine stabilizer link is working its way out of its aluminum housing thereby rubbing against the engine oil pan.
M1301182019-12-16. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. DME FAULT CODE 1B8004 ENVIRONMENTAL AIR CATALYST(EAC) SENSOR: The Malfunction Indicator Lamp (MIL) light is on and the following fault code is stored in the DME: 1B8004 - EAC Sensor: Temperature - Engine coolant temperature radiator outlet comparison to each other implausible DME software calibration error for EAC sensor diagnostics.
M1301192019-09-23. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. LIN BUS COMMUNICATION FAULT FOR ENVIRONMENTAL AIR CATALYST (EAC) SENSOR FC1B8302. The malfunction indicator lamp light is on (MIL) with the following fault code stored in the DME.
M1301192019-09-23. Service bulletin. ENGINE AND ENGINE COOLING. LIN BUS COMMUNICATION FAULT FOR ENVIRONMENTAL AIR CATALYST (EAC) SENSOR FC1B8302. The malfunction indicator lamp light is on (MIL) with the following fault code stored in the DME.
M1202192019-08-19. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. DIAGNOSTIC HINT: CATALYTIC CONVERTER INSPECTION AFTER LOSS OF CRANKSHAFT SIGNAL: In certain situations when the crankshaft position signal is lost while driving the malfunction indicator lamp (MIL) and an engine malfunction check control message (CCM #29) may be displayed. The engine may run roughly or with reduced power.
M1101172019-06-24. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. The Service Engine Soon (MIL) light is on with the following fault stored in the Digital Motor Electronics (DME). In the situation being described the fault is only stored during the cold winter months along with the use of winter fuel.
M1101192019-03-18. Service bulletin. ENGINE. ENGINE VIBRATIONS OR NOISE. One of the following complaints may be reported: The engine runs erratically; The engine causes vibrations when running; Grinding noise from the engine compartment when engine is running.
M1601192019-02-25. Service bulletin. ENGINE. ENGINE STALLS AFTER STARTING OR WILL NOT START. The engine stalls right after starting (when stationary).
M5102162018-12-10. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.
M3601152018-12-10. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.
M3103152018-12-10. Service bulletin. ENGINE; EQUIPMENT ADAPTIVE/MOBILITY. SI M11 03 15 February 2016 Engine Technical Service This Service Information bulletin supersedes SI M11 03 15 dated April 2015. SUBJECT B38 Engine: Mixture Faults Stored in DME and Cylinder Head Cover Leaking Engine Oil.
M1213152018-12-10. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE); ELECTRICAL SYSTEM; ENGINE. ?SUBJECT Service Action: Program Control Units (DME) . A Check Control Message could intermittently be displayed indicating a Start/Stop Function failure. Vehicle may not restart after stopping. The following fault is stored in the DME: Fault 20BA20: clutch switch, signal: missing In addition the BDC may have the following fault stored: Fault 804084: clutch switch, plausibility fault compared to CAN signal This can occur if for example 14 gears changes are made, but the upper clutch position switch is only activated 10 times. This difference could occur when the clutch pedal is not being fully released between gear shifts or by resting a foot on the pedal so the upper switch position is not recognized.
M1203172018-11-26. Service bulletin. ENGINE. "?Primarily when vehicle is at altitudes higher than 1500m above sea level, and engine is at operating temperature, the idle is sporadically elevated (up to approx. 1200 rpm). MIL indicator is illuminated. Fault code 1E0001 - ""Idle speed control: Speed too high"" is stored in DME. CAUSE DME software error The DME software improvements come in 2 steps 1. Primary improvements with I-level XXXX-17-03-50x. 2. Additional minor improvements with I-level XXXX-17-07-50x (ISTA/P 3.62.0 - expected release July 6, 2017 or ISTA NEXT 4.06.1x -expected release June 23, 2017)."
M1110162018-11-13. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. "THERMOSTAT FAULTS (B-ENGINES). The Service Engine Soon light is on. A Check Control message for ""Engine overheated"" and or ""Exercise caution!"" may also display. The following fault codes may be stored in the DME: 1D2401 - Characteristic map thermostat, actuation: Short circuit to B+ 1D2402 - Characteristic map thermostat, actuation: Short circuit to ground 1D2404 - Characteristic map thermostat, actuation: Line disconnection During diagnosis the coolant may be found to be discolored. Insulation on the wiring for the map activation thermostat (heating element) may be damaged. Exposed wiring may allow coolant to enter the harness. This may cause damage to the heating element."
M6401162018-11-05. Service bulletin. ENGINE AND ENGINE COOLING. Water Ingress In Footwell Area From A/C Condensate Drain This Service Information bulletin supersedes SI M64 01 16 dated March 2016.. Damp front foot-well carpet after long period of air conditioning use. Musty odor in the vehicle (moldy, old socks, laundry room). The A/C condensate drain hose is blocked by the heatshield. The A/C condensate drain hose is not attached properly to the housing. The A/C condensate drain hose was damaged during installation or previous repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.