WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Mazda CX-30

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

616 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SA-043-222022-07-06. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT ADAPTIVE/MOBILITY. FSC dynamic aiming (mid-drive aiming) may not complete if the vehicle is driven on a road as described below: - The road lane markings are covered by snow and are not visible. - There are no road lane markings on the road surface. - The road is winding and the vehicle cannot drive straight (300 m / 984 ft or more turning radius is required). FSC dynamic aiming is completed if the following conditions are met: 1. "Forward Sensing Camera Calibration Mode" message (1) on instrument cluster MID disappears. 2. The i-ACTIVSENSE warning light (2) turns off. 3. Steps 1 and 2 are completed within 20 minutes from start of aiming.
SA-040-222022-07-06. Service bulletin. EXTERIOR LIGHTING; EXTERIOR LIGHTING:HEADLIGHTS. Some customers may report hearing noise from their headlamps. While some noise is normal from the electric motor, if it is louder in one headlamp than the other or both are significantly louder than a known good vehicle, follow the steps below to repair.
SA-039-222022-07-06. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; UNKNOWN OR OTHER. Some customers may complain about scratches on the instrument cluster lens.
SA-038-222022-07-06. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. Service part Automatic Transaxles (ATX) manufactured on or after July, 2018 are shipped with a blank TCM that requires configuration.
SA-004-22c2022-07-06. Service bulletin. ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
16-001-22b2022-06-04. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12002 or later).
16-001-22a2022-06-04. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12002 or later).
09-019-222022-06-04. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. * Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. * Symptom 2: The touch sensor of the front door outer handle does not unlock the doors. * Cause 1 (for Symptom 1): Water may accumulate around the touch sensor in the outer handle, resulting in temporary lower sensitivity of the capacitive sensor. Also, if car wash foam gets inside the outer handle while washing the vehicle, the foam may disturb the touch sensor detection. Mazda is still working on a mass production change for this concern. * Cause 2 (for Symptom 2): Improper soldering in the production process may disturb the touch sensor detection. To eliminate this concern, the production process has been modified.
09-018-222022-06-04. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 74.00.311 or later).
02-004-222022-06-04. Service bulletin. SUSPENSION. Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
SA-034-222022-06-04. Service bulletin. ELECTRICAL SYSTEM. When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
SA-033-222022-06-04. Service bulletin. WHEELS. Some vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
SA-031-222022-06-04. Service bulletin. WHEELS. Some customers may complain that the tire sidewalls are distorted or "damaged".
SA-028-222022-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:WIRELESS CHARGER/CRADLE; ELECTRICAL SYSTEM. Qi Wireless Charger Symptom Troubleshooting
SA-019-22a2022-06-04. Service bulletin. UNKNOWN OR OTHER. Mazda Connected Services Frequently Asked Questions (FAQs)
SA-017-22a2022-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EXTERIOR LIGHTING:HEADLIGHTS; LATCHES/LOCKS/LINKAGES:DOORS:LOCK; ELECTRICAL SYSTEM. Some customers may complain about any of the following: *Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. **Remote function(s) inoperative. **Engine Start / Stop **Door Lock / Unlock **Lights ON / OFF *MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. **If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. **If the reception is good to strong, proceed to the Repair Procedure.
SA-004-22b2022-06-04. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-001-22c2022-06-04. Service bulletin. COMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT; UNKNOWN OR OTHER. Use the symptom troubleshooting tables to diagnose MAZDA CONNECT concerns.
09-015-222022-05-05. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE; LATCHES/LOCKS/LINKAGES. Some vehicles may exhibit corrosion on the liftgate lock striker. This may be caused by water penetrating from micro cracks existing on the lock striker's coating surface that reacts with zinc contained in the undercoating and produces the corrosion. To eliminate this concern, a modified undercoating has been established for the liftgate lock striker.
09-012-222022-05-05. Service bulletin. EQUIPMENT; SEATS. At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
08-002-222022-05-05. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. *B1126:13 - Driver-side side air bag module circuit open circuit or resistance high *B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: *When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. *The DTC detection level is too sensitive. To eliminate these concerns: *The design of the connector terminals in the side air bag module has been modified for firmer contact. *The DTC detection level of the SAS control module has been optimized.
06-001-222022-05-05. Service bulletin. STEERING. Some vehicles may exhibit a knocking noise from the steering column while driving. This may be caused by an improper manufacturing process where the worm wheel gear is not at a proper distance.
02-003-222022-05-05. Service bulletin. STEERING. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
SA-026-222022-05-05. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Apple CarPlay / Android Auto Frequently Asked Questions (FAQs)
SA-023-222022-05-05. Service bulletin. ENGINE AND ENGINE COOLING. A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.