WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Mazda CX-30

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

616 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SA-020-222022-05-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some customers may complain about the following symptoms occurring when driving without anything ahead (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail). *While using Mazda Radar Cruise Control (MRCC), the MRCC cancels by itself. NOTE: The customer may misinterpret MRCC cancellation as unintended braking. MRCC cancellation feels the same as the steering wheel cancel button being pressed or the brake pedal being tapped. *When MRCC is not in use, "Safety and Driver Support Systems Temporarily Disabled. Front Radar Obscured." message appears in the instrument cluster / "Remove dirt on the front radar sensor" message appears in the center display and related i-ACTIVSENSE functions stop working. This is caused by the front radar (under specific road conditions) detecting a false error as if the radar sensor is dirty, resulting in cancellation of the MRCC. (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail).
SA-019-222022-05-05. Service bulletin. ELECTRICAL SYSTEM. Mazda Connected Services Frequently Asked Questions (FAQ).
SA-018-222022-05-05. Service bulletin. ENGINE AND ENGINE COOLING. The WSM shows 3 possible crankshaft sprocket and timing chain combinations (Type A, B and C), but some vehicles have been produced with a combination of Type A timing chain with 2 yellow-colored links with a Type B crankshaft sprocket.
SA-017-222022-05-05. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. *Remote function(s) inoperative. *Engine Start / Stop **Door Lock / Unlock **Lights ON / OFF *MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. *If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. *If the reception is good to strong, proceed to the Repair Procedure.
SA-016-222022-05-05. Service bulletin. EQUIPMENT. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
SA-004-22a2022-05-05. Service bulletin. ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-014-222022-04-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
SA-013-222022-04-06. Service bulletin. ENGINE. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly.
SA-012-222022-04-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; TIRES; EQUIPMENT ADAPTIVE/MOBILITY. Some customers may complain about the infotainment system and/or the MyMazda App showing incorrect tire pressures and/or tire pressure missing. This may be caused by: Incorrect calendar entry (month/day/year) after a battery disconnect *Infotainment system software update. *BCM TPMS unlearn during vehicle storage or transport. *Wheel/Tire change
SA-006-22a2022-04-06. Service bulletin. EQUIPMENT:MECHANICAL; POWER TRAIN; WHEELS. There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
SA-003-22d2022-04-06. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. *DO NOT perform BCM software update with MDARS until further notice. *This SA will be updated with the newest repair information as it becomes available.
SA-003-22c2022-04-06. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM:ADAS:HUD:SOFTWARE. Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. •DO NOT perform BCM software update with MDARS until further notice. •This SA will be updated with the newest repair information as it becomes available.
16-001/222022-04-05. Service bulletin. ELECTRICAL SYSTEM. Some vehicles entertainment system may experience the symptoms mentioned, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later).
09-010/222022-04-05. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some customers may complain about frequent low battery warning message appearing in the instrument cluster. The warning message appears when the power saving mode is activated to avoid a drained battery. Depending on the customer usage, the warning message may appear more frequently due to the condition for the power saving mode to be activated sooner and to be deactivated later. To eliminate this concern, the control software of the BCM has been modified to change the condition for the power saving mode to be activated and deactivated. *Activation of the power saving mode: The accumulated time 30 minutes has been extended to 90 minutes. *Deactivation of the power saving mode: Driving or engine running for 5 minutes has been shortened to 3 seconds.
09-008/222022-04-05. Service bulletin. EQUIPMENT; STRUCTURE. Some vehicles may exhibit water leaking into the passenger compartment from the rear door through the bottom of the service hole behind the rear door trim during rain or when washing the vehicle. This is caused by one of the following: *Since the material of the seal rubber is not resistant to surfactants, the rubber deteriorates when the vehicle is washed and allows water to penetrate into the seal rubber of the service hole cover. *The lower tabs of the service hole cover may not have been completely engaged at the factory. To eliminate this concern, the seal material of the service-hole cover has been changed (Japan built Mazda3) and a mass production change will be implemented in the future (Mexico built Mazda3 and CX-30).
09-006/222022-04-05. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. Some customers may experience that after the doors are locked and the Fuel Door Lock Delay with MAZDA CONNECT has passed (default setting is 90 seconds), the fuel-filler lid does not lock and can be opened when pressing it. NOTE: *The fuel-filler lid does not lock immediately after the doors are locked, but after the time set in the Fuel Door Lock Delay (0, 30, 60, 90, and 120 seconds). *Although the root cause has not been identified, the vehicle should be repaired by adjusting the fuel-filler lid opener cable position when there is a customer complaint.
01-003/222022-04-05. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
01-001/22a2022-04-05. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Some vehicles may exhibit an excessive body vibration when idling or driving after being left in extremely cold weather (-20°C/-4°F or below) for a long time. This is caused by the No.1, No. 3 and No. 4 rubber hardening due to material characteristics. NOTE: This concern only happens in extremely cold weather, therefore this TSB is only applicable for extremely cold regions. To eliminate this concern, the cold environment performance of the engine mount rubber has been increased by changing the rubber material.
SA-009-222022-03-04. Service bulletin. POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT; POWER TRAIN. The new AWD rear differential DOES NOT come with a breather cap on the rear of the differential, therefore a new one will need to be ordered and installed when replacing the differential. NOTE: The breather threads have a sealant and locking compound that prevents it from being reused. Refer to GEPC for the correct part number of the Differential Breather. The instructions on MGSS will be updated soon to include replacing the breather when replacing the differential with a new unit.
SA-008-222022-03-04. Service bulletin. STRUCTURE. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
SA-007-22a2022-03-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some vehicles equipped with SiriusXM Travel Link and a Navigation SD Card added by dealer/customer may experience a SiriusXM Travel Link error when selecting Parking Information.
SA-007-222022-03-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; ELECTRICAL SYSTEM. Some customers may experience a SiriusXM Travel Link error when selecting Parking Information.
SA-006-222022-03-04. Service bulletin. SUSPENSION:FRONT:WHEEL BEARING; POWER TRAIN. There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
SA-004-222022-03-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-003-22b2022-03-04. Service bulletin. ELECTRICAL SYSTEM. CX-30. Mazda3: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. Customers having this concern should have their vehicle repaired using the following repair procedure. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. DO NOT perform BCM software update with MDARS until further notice. This SA will be updated with the newest repair information as it becomes available.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.