Service bulletins for the 2021 Mazda CX-30
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
616 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| SA-003-22a | 2022-03-04. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT) and the DTC cannot be erased. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, contact Hotline for newest repair information. DO NOT perform BCM software update with MDARS until further notice, including CSP06 and CSP07. This SA will be updated with the newest repair information as it becomes available. |
|---|---|
| SA-002-22a | 2022-03-04. Service bulletin. ELECTRICAL SYSTEM. Some vehicles may have a "Low Battery Risk. Start Vehicle to Charge 12V Battery" warning message in the instrument cluster and a 30 second alarm sound. This is caused by the vehicle's electrical control area network (CAN) entering "Sleep Mode" when the network awake time reaches 30 cumulative minutes without the engine running. |
| 01-001-22 | 2022-03-04. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. Some vehicles may exhibit an excessive body vibration when idling or driving after being left in extremely cold weather (-20°C/-4°F or below) for a long time. This is caused by the No.1, No. 3 and No. 4 rubber hardening due to material characteristics. NOTE: This concern only happens in extremely cold weather, therefore this TSB is only applicable for extremely cold regions. To eliminate this concern, the cold environment performance of the engine mount rubber has been increased by changing the rubber material. |
| 00-001-22 | 2022-03-04. Service bulletin. POWER TRAIN; SERVICE BRAKES, HYDRAULIC; ENGINE AND ENGINE COOLING; STEERING. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. |
| MT-001-22 | 2022-03-04. Service bulletin. UNKNOWN OR OTHER; STRUCTURE. Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions. Use a clean towel damped in leather/vinyl cleaner or mild soap to clean the steering wheel. NOTE: Upholstery maintenance and care information can also be found in the Owner's Manual. |
| 15-003/22 | 2022-02-04. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT; ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE. Some vehicle may experience the i-ACTIVSENSE/ALH warning lights on and a system error messages may be found in the center display as well. DTC U3000:04 (FSC) is stored in memory DTC U3000:04 (FSC) - Forward sensing camera (FSC) internal malfunction This may be caused by a hardware failure in an internal device of the FSC that results in the malfunction detection. To eliminate this concern, the production process of the FSC has been modified. |
| 09-004/22 | 2022-02-04. Service bulletin. LATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM. Some CX-5 and CX-30 customers may find that the liftgate does not close when pressing the power liftgate (PLG) rear switch (A) located on the interior liftgate trim. This may be caused by PLG switch corrosion. Water from a high pressure car washer and/or condensation may drip onto the switch connector and cause corrosion. To eliminate this concern, the PLG rear switch has been modified with a waterproof connector. Some Mazda3, CX-30 and MX-30 customers may complain that the vehicle door locking system does not work when the door lock switch on the liftgate interior trim is pressed. DTC B11C4:23 (BCM - liftgate lock switch circuit malfunction) may be stored. This may be caused during a high pressure car wash and/or condensation. Water may enter through the rear center brand emblem base component and drip onto the switch connector causing corrosion. The rusted connector may also cause a battery drain. To eliminate this concern, the rear center brand emblem base has been modified to prevent water entry (Mazda3) and the rear harness has been modified to prevent water infiltration (Mazda3, CX-30 and MX-30). |
| SA-002/22 | 2022-02-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Some vehicles may have a "Low Battery Risk. Start Vehicle to Charge 12V Battery" warning message in the instrument cluster and a 30 second alarm sound. This is caused by the vehicle's electrical control area network (CAN) entering "Sleep Mode" when the network awake time reaches 30 cumulative minutes without the engine running. The vehicle network starts to wake-up at the moment any side door is opened in order to increase the start-up speed of electrical components and the network awake cumulative time count begins by the customer doing any one of the following wake-up triggers: Open any door(s), Unlock doors, Open liftgate, Depress brake pedal, Push start/stop button, Other operations that wake-up the network. No dealer visit is required. The warning message can be cleared by starting the engine and idling or driving for 5 minutes or longer. |
| SA-027-21c | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Mazda Connect Symptom Troubleshooting (7th Generation Vehicles): Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 How to update the Navigation SD Card Map No. 12 How to Check Navi SD Card VIN Lock |
| SA-013-21h | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; ELECTRICAL SYSTEM. Connected Vehicle Symptom Troubleshooting: Some customers may complain about any of the following: - Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. - Remote function(s) inoperative. o Engine Start / Stop o Door Lock / Unlock o Lights ON / OFF MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. - If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. - If the reception is good to strong, proceed to the Repair Procedure. |
| 16-002-21-3858 | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Audio, Navigation, And Phone Concerns With Mazda Connect Infotainment System (7th Generation Models): Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). --> See document for full list. Customers having this concern(s) should have their vehicle repaired using the following repair procedure. |
| 09-039-21-3807 | 2022-01-06. Service bulletin. STRUCTURE; EQUIPMENT; ELECTRICAL SYSTEM. Door Outer Handle Touch Sensor Does Not Lock And/Or Unlock: Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. Symptom 2: The touch sensor of the front door outer handle does not unlock the doors. Cause 1 (for Symptom 1): Water may accumulate around the touch sensor in the outer handle, resulting in temporary lower sensitivity of the capacitive sensor. Also, if car wash foam gets inside the outer handle while washing the vehicle, the foam may disturb the touch sensor detection. Mazda is still working on a mass production change for this concern. Cause 2 (for Symptom 2): Improper soldering in the production process may disturb the touch sensor detection. To eliminate this concern, the production process has been modified. Customers having this concern should have their vehicle repaired using the following repair procedure. |
| 09-038-21-3855 | 2022-01-06. Service bulletin. STRUCTURE. Rear Outer Door Handle Fails To Return Due To Water Freezing In The Handle: Some vehicles may exhibit the rear outer handle remains pulled out and does not return when the rear outer handle is operated in freezing temperatures. This is caused by the accumulation of snow on the rear outer handle melting and dripping water on the sliding part of the lever. When the water freezes due to decreased temperature and the handle is operated, peeled ice gets caught between the outer handle case and the slide, causing the return failure. To eliminate this concern, the shape of the rear outer handle has been changed to prevent the accumulation of water on the sliding part of the lever. Customers having this concern should have their vehicle repaired using the following repair procedure. |
| 09-019-21-3813a | 2022-01-06. Service bulletin. FUEL/PROPULSION SYSTEM; STRUCTURE; EQUIPMENT. Fuel Filler Lid Panel Is Deformed: Some vehicles may exhibit a deformed fuel-filler lid panel (1) attached to the fuel-filler lid box, resulting in a poor appearance. This concern is caused by the lid box not having enough water drainage capability which leads to the accumulation of water inside it. The water then freezes in cold weather and expands or the inner side of the lid panel absorbs the water and swells from long exposure, deforming the lid panel. To eliminate this concern, the shape of the fuel-filler lid box has been modified to have better drainage capability and a modified fuel-filler lid panel service part has been established for less water absorbance. Customers having this concern should have their vehicle repaired using the following repair procedure. |
| 09-012-21-3801b | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Door Lock Will Not Work Using Remote Transmitter and Engine Will Not Start: Some customers may experience all of following symptoms: 1. The door lock/unlock operation will not work using the remote transmitter button. 2. The door lock/unlock operation will not work using the door lock/release touch sensor. 3. The engine will not start using the ignition switch. 4. The transmitter operates by itself. 5. The key battery drains faster than usual. Symptoms 1-3: This may be caused when excess load is applied to the remote transmitter, deforming the electrical terminals and creating poor contact with the battery. To eliminate this concern, the structure in the remote transmitter has been modified to reduce the deformation of the electrical terminals. Symptom 4-5: This may be caused when excessive load is applied to the remote transmitter, creating a gap around the gasket where moisture enters and corrodes the circuit board which in turn drains the key battery faster than usual. To eliminate this concern, the thickness of the case wall on the gasket mounting surface has been increased and the bonding strength of the components has been improved to prevent deformation. Customers having this concern should have their vehicle repaired using the following repair procedure. |
| 01-006-21-3779b | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM. Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure. |
| SA-031-21c | 2022-01-05. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. New Cylinder Head Assembly Established: A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. |
| SA-054-21a | 2021-12-02. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some customers may complain about any the following infotainment system concerns: Reboot, Slow reboot in morning, Display frozen, Display blank. NOTE: Rear view monitor operation is normal, No DTC stored |
| SA-054-21 | 2021-12-02. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. Some customers may complain about any the following infotainment system concerns: Reboot, Slow reboot in morning, Display frozen, Display blank. NOTE: Rear view monitor operation is normal, No DTC stored |
| SA-055-21 | 2021-12-02. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. Due to a supplier issue, DTC C0061:94 is displayed instead of C0061:96 for Mazda3 and CX-30. Therefore, use the C0061:96 diagnostics on MGSS when DTC C0061:94 is stored. |
| SA-053-21 | 2021-12-02. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER; EQUIPMENT. A customer may complain of poor A/C operation (either completely inoperative or not cold enough). |
| SA-052-21 | 2021-12-02. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. For improvement of electrical diagnosis, the SKYACTIV® Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV® vehicles and compare suspect terminal drag with a good know terminal.To measure the voltage/resistance avoiding any terminal damage. |
| 09-035-21-3842 | 2021-12-02. Service bulletin. VISIBILITY; EQUIPMENT ADAPTIVE/MOBILITY. Some vehicles may exhibit windshield glass distortion or a double-image from the active driving display. These may be due to a) distortion in the windshield glass not properly removed during the manufacturing process or b) glass with incorrect specifications used in the manufacturing process. To eliminate these concerns, the windshield glass manufacturing process has been modified. |
| 01-012-21-3832a | 2021-12-02. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Some vehicles may have a “LOW ENGINE OIL LEVEL” warning message and a CHECK ENGINE light illuminated in the instrument cluster, along with DTC P250F:00 stored in memory. DTC P250F:00 - Engine oil level signal: engine oil level low. Upon inspecting the engine oil level, the level is found to be low and there doesn’t appear to be any trace of oil leakage in the engine compartment. This concern usually occurs when the mileage reaches approximately 3,100 – 4,700 miles (5,000 - 7,500km) and may also occur again after replacing or topping off the engine oil. The root cause of this concern has not been identified yet, therefore a repair procedure will be announced at a later date. Since this issue has been reported after a valve stem seal modification, it is very likely that valve stem seal damage is causing oil to leak into the combustion chamber. |
| SA-012-21g | 2021-11-01. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. MAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.