Service bulletin SA-034-22

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10213148
Published by NHTSA	2022-06-04
Manufacturer's number	SA-034-22
Manufacturer's date	2022-05-20
NHTSA component	ELECTRICAL SYSTEM

NHTSA's summary

When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
MAZDA CX-30	2020, 2021, 2022
MAZDA CX-5	2021, 2022
MAZDA CX-50	2023
MAZDA CX-9	2021, 2022
MAZDA MAZDA3	2019, 2020, 2021, 2022
MAZDA MX-30 PHEV	2022 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
19V363000	2019-05-14. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; SEAT BELTS:FRONT:WARNING LIGHT/DEVICES

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SA-042-26a	2026-10-03. Service bulletin. Mazda Connected Services - Frequently Asked Questions (FAQ) This Service Alert supersedes the previously issued SAs listed below. The changes are noted in Red text. SA-042/26 06/30/26 DESCRIPTION Frequently Asked Questions (FAQ) Index General Questions MAZDA CONNECT Indication Setup and Getting Started Dealer Processes Registration / Enrollment / Take-Over Customer Subscription Status WI-FI General Informatio Opening the TCU Communication Line WI-FI How-To Conditions for Remote Engine Start Will Not Function WI-FI Trial Period Conditions for Remote Engine Start Function Will turn engine OFF Interacting With The App TCU Communication Line Status Service Issues Educational Videos Troubleshooting Resources MyMazda App Error Codes Customer Opt-Out
SA-041-26a	2026-10-03. Service bulletin. DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged into the 12V outlet 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay™/ Android Auto™ will not connect) 6. Over-sized wheels/tires (incorrect GPS location) 7. DTC C0023:14 8. Decorative trim and/or cover on the START/STOP ENGINE button
SA-038-26b	2026-10-01. Service bulletin. This Service Alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-038/26 08/18/26 and 06/15/26 DESCRIPTION Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App
SA-039-26a	2026-09-04. Service bulletin. This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red text. SA-039/26 06/15/26 Mazda Connect Symptom Troubleshooting DESCRIPTION Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-038-26a	2026-09-04. Service bulletin. This Service Alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-038/26 06/15/26 DESCRIPTION Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote functions inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Index MAZDA CONNECT 2 Center Display Status Icon MAZDA CONNECT 3 Center Display Status Icon Remote Engine Start Will Not Function Remote Engine Start Function Will turn engine OFF Customer Subscription Status TCU Communication Line Status
SA-054-26	2026-09-04. Service bulletin. This Service Alert supersedes the previously issued Service Alerts listed below: The changes are noted in Red. Infotainment Reboot With Navigation Card Installed This Service Information is no longer valid. Refer to the following updated Technical Service Bulletins: CX-5 / CX-9: 16-002/23 - UPDATED SOFTWARE RELEASE FOR CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM (7TH GEN TYPE) Mazda3 / CX-30 (Non-Turbo): 16-008/23 - UPDATED SOFTWARE RELEASE FOR CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM Mazda3 / CX-30 (Turbo): 16-007/23 - UPDATED SOFTWARE RELEASE FOR CONCERNS WITH MAZDA CONNECT INFOTAINMENT SYSTEM
SA-053-26	2026-09-04. Service bulletin. This Service Alert supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-006/23 01/23/23 DESCRIPTION Some customers may complain about the infotainment system and/or the MyMazda App showing incorrect clock and/or tire pressures and/or tire pressure missing. This may be caused by: Incorrect calendar entry (month/day/year) after a battery disconnect Infotainment system software update. BCM TPMS unlearn during vehicle storage or transport. Wheel/Tire change REPAIR PROCEDURE This can be corrected by the customer driving the vehicle for a day or two so that the following will occur.
SA-050-26	2026-09-04. Service bulletin. DESCRIPTION Some vehicles may continue to display the recall notification "IMPORTANT NOTICE. VIEW VEHICLE STATUS MONITOR FOR DETAILS" on the center display even after the recall has been completed. NOTE: Once the warranty claim for the recall campaign is approved by Mazda Japan, the recall notification will be automatically removed via Connected Services on the following day or later. This condition may occur if the Connected Services subscription was canceled while the recall notification was still active. ACTION TO BE TAKEN If you encounter the situation above, use MDARS to manually remove the center display recall notification. Note: MDARS can only remove the recall notification when MCVV shows no CV contract.
09-024-26	2026-09-02. Service bulletin. DESCRIPTION Some vehicles may exhibit a condition in which a warning buzzer (error sound) is heard, and the power liftgate (PLG) does not open or close automatically. When these symptoms happen, DTCs B144F:11 or B144F:13 may be stored. B144F:11 Power liftgate (PLG) drive unit motor circuit malfunction B144F:13 Power liftgate (PLG) drive unit motor circuit malfunction NOTE: The liftgate can be opened or closed manually, though effort may be higher without the motor assist. Due to improper assembly of the brush spring within the PLG unit motor, the contact pressure of the brush decreases, resulting in poor continuity. As a result, sufficient current may not be supplied to the motor. The manufacturing process has been improved to ensure proper positioning of the spring during assembly. REPAIR PROCEDURE Replace the power liftgate drive unit according to the instructions on MGSS POWER LIFTGATE (PLG) DRIVE UNIT REMOVAL/INSTALLATION.
06-001-26	2026-08-04. Service bulletin. DESCRIPTION Some customers may complain that the electric power steering warning light illuminates after engine start and DTC U2011:1C is stored. Zinc-plated whisker may form inside the EPS motor and trigger the DTC. However, since it is cleared when power is supplied during DTC detection, normal operation can be restored by turning the ignition OFF and then ON. Furthermore, there is no possibility of recurrence. This case may be resolved through a simple inspection or repair without the need for parts replacement, potentially avoiding unnecessary customer waiting time.