Service bulletins for the 2022 Ford F-150
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
594 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Electrical system are shown. Show all
| 23B70 | 2024-02-01. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; UNKNOWN OR OTHER. Certain 2022-2023 Model Year F-150 Battery Electric Vehicles Battery Monitor Sensor Replacement |
|---|---|
| SSM 52213 | 2024-01-30. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM:BODY CONTROL MODULE:SOFTWARE. Some 2022-2023 F-150 and 2023 F-Super Duty vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit a Please Contact Authorized Dealer For Service message in the center display screen with DTC P0A93:96 stored in the DCACA. This may be due to the software level of the DCACA and has no effect on vehicle operation. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, reprogram the DCACA to the latest software level using the latest version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19G317 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| TSB 23-2427 | 2024-01-05. Service bulletin. ELECTRICAL SYSTEM. This article supersedes TSB 23-2240 to to add labor operation H and correct parts list. Some 2021-2023 F-150 vehicles may exhibit a no crank/no start with a battery draw and air conditioning (A/C) clutch engaged at all times. This may be due to an opened diode in the A/C clutch field coil damaging the output driver (field effect transistor YFET) in the body control module C (BCMC). To correct the condition, follow the Service Procedure to replace the BCMC and A/C clutch field coil assembly. |
| TSB 23-2407 | 2024-01-05. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some 2021-2022 F-150 vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit a Pro Power Onboard Unavailable message in the vehilce center display screen with DTC B15DA:09 in the BCM. This may be due to the software level of the BCM and powertrain control module (PCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, perform the Service Procedure below to reprogram the BCM and PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS). |
| SSM 52130 | 2023-12-11. Service bulletin. ELECTRICAL SYSTEM:PROPULSION SYSTEM:CHARGING:MODULE:ONBOARD (OBCM). Some 2021-2023 Mustang Mach-E, 2022-2023 E-Transit/F-150 Lightning vehicles may have diagnostic trouble code (DTC) P1A3C stored in the off-board charger controller module (OBCC). The P1A3C is commonly set due to an interruption of the direct current (DC) fast charging process and should be disregarded. All other DTCs stored in the OBCC are to be addressed using applicable publications and/or normal diagnostics found in Workshop Manual, Section 414-03B. |
| OTAPU0813DORUP2 | 2023-12-07. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM. Software Update PU0813-DOR-UP2 for 2022-2023 F-150 BEV Lightning vehicles is now available. Quality Improvements include: -Prevent vehicles experiencing loss of driver frontal switch pack control (window, mirror, rear window lockout, mirror-fold if equipped)) at low voltage. |
| OTAPU1103NATF150 | 2023-12-07. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Software Update PU1103-NAT-VCE for 2022-2023 F-150 Lightning vehicles is now available. Quality improvements include: - Addresses charge status blue segments illuminated indicator issue - Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. - Selectable Drive Modes - prevent default to normal mode due to loss of communication with SYNC - Improved instant voice feedback share feature - Improved Ask on Exit pop- up functionality. - Improved charge status indication feedback while plugged in. |
| OTAPU1103NATVCE | 2023-12-07. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Software Update PU1103-NAT-VCE for 2022-2023 F-150 vehicles is now available. Quality improvements include: - Digital owner Manual addition (2023MY Only) -Ford Blue Cruise Map expiration removal update. - Adds a "some display features may be temporarily unavailable" message to the SYNC screen when a SYNC update is installing. - Selectable Drive Modes - prevent default to normal mode due to loss of communication with SYNC - Improved SYNC Display and single toggle addition to disable certain features that will help enhance your towing experience. - Improved instant voice feedback share feature -Addresses SYNC reboot issue may occurs after 2 hours of continuous use. |
| TSB 23-2367 | 2023-12-05. Service bulletin. ELECTRICAL SYSTEM. This article supersedes TSB 22-2324 to add an additional model year. Some 2021-2023 F-150 vehicles equipped with a 400 watt direct current/alternating current (DC/AC) inverter system with a pickup bed alternating current (AC) power outlet socket may experience the DC/AC inverter system inoperative with diagnostic trouble code (DTC) B1330:9A stored in the body control module (BCM). This may be due to a connection issue at C4628. To correct the condition, follow the Service Procedure to inspect the connector and secure the harness. |
| 23H07 | 2023-12-05. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. Certain 2021-2023 Model Year F150, 2022 Model Year F53/F59 Stripped Chassis, 2022-2023 Model Year F650/F750, 2023 Model Year Ranger, 2024 Model Year Econoline - Body Control Module (BCM) Replacement |
| SSM 52088 | 2023-12-01. Service bulletin. ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SENSORS. Some 2022-2023 F-150 Lightning vehicles equipped with front park aid (minor feature code HNLAB) may exhibit an inoperative front park aid feature with a Front Parking Sensors Not Available Sensors Blocked See Manual message in the IPC without any diagnostic trouble codes (DTCs) associated with the condition. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This may be due to the software level of the image processing module A (IPMA). This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Engineering is working on a solution that is expected in Q1 2024. Monitor OASIS for additional information and schedule service appointments once the repair becomes available. |
| SSM 52078 | 2023-11-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Some 2021-2023 F-150 vehicles may exhibit DTC U023A:08 after reprogramming the SCCM. Do not replace or reprogram the SCCM, image processing module A (IPMA) or their components for this condition at this time. This DTC does not alert the customer, will not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Engineering is currently working on a solution for this condition that will reprogram the IPMA and is expected in late December 2023. Monitor OASIS for additional information. |
| SSM 52075 | 2023-11-21. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; EXTERIOR LIGHTING. Some 2022 F-150 vehicles may exhibit an inoperative headlamp after a body control module (BCM) software update. There may also be BCM diagnostic trouble codes (DTCs) B14E5:08 and/or B14E7:08 present. This may be due to a software incompatibility between the headlamp light emitting diode (LED) control module and the BCM. If this condition occurs after a BCM software update, confirm the BCM is at the latest software level and replace the headlamp LED module on the affected headlamp. Refer to Workshop Manual (WSM), Section 417-01. |
| SSM 52039 | 2023-11-09. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2023 Mustang Mach-E, 2022-2023 F-150 Lightning/e-Transit vehicles may exhibit a concern where the vehicle is unable to achieve 100 percent state of charge immediately after high voltage (HV) battery module balancing and replacement. This may be due to the battery energy control module (BECM) adjusting the cell balance (conditioning) of the battery module and should be corrected within 22 days. If the vehicle otherwise functions as designed with no related diagnostic trouble codes (DTC) setting, this concern will be corrected automatically with no further actions required by the technician. |
| PU1005-FRK-CLS | 2023-11-03. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM:SOFTWARE. Software Update PU1005-FRK-CLS for 2022 F-150 BEV Lightning vehicles is now available. Quality Improvements include: - Improve Zone Lighting Feature to allow activate or deactivate from FordPass app or SYNC. - To allow Frunk to close using exterior button when customer does not have the keys and vehicle is locked. |
| SU6 P2 F150 BEV | 2023-11-03. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Software Update SU6 P2 for 2022-2023 F-150 BEV Lightning vehicles is now available. Quality Improvements include: - Re-enable charge status indication feedback during charging. - Adds a ""some display features may be temporarily unavailable"" message to the SYNC screen when a SYNC update is installing - SYNC to send Trailer Range per Full Charge updates to other modules for all trailer profiles. - BlueCruise removal of map expiration. - Improved instant voice feedback share feature. - Selectable Drive Modes - prevent default to normal mode due to loss of communication with SYNC -Various Apple Carplay quality improvements -Robustness actions to improve steering column control module signal management to reduce battery drain contribution. - Improvement in automatic rain sensor function. - Prevents the heated steering wheel and rear window from being disabled during preconditioning. |
| 23H05 | 2023-11-02. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; UNKNOWN OR OTHER. Harvest Program 23H05 Certain 2022 Model Year Navigator and 2022-2023 Model Year Mach-E, F150 Lightning, F150, Expedition and Bronco - Instrument Cluster Odometer Inspection |
| SSM 51926 | 2023-10-04. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2023 F-150, 2022-2023 Expedition vehicles equipped with 10 channel audio digital signal processing (DSP) module may exhibit a pop noise and/or static in the speakers at start up that cannot be turned down or off using the audio system controls. To confirm a vehicle is built with a 10 channel DSP module, verify the minor feature code, F-150 (IDBBQ)/Expedition (IDBAP or IDBBR), by reviewing the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS) website. To correct the condition, reprogram the DSP module to the latest software level using the Ford Diagnosis and Repair System (FDRS) diagnostic scan tool. For claiming, use causal part 18B849 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. |
| SSM 51903 | 2023-10-04. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2023 Ford and Lincoln vehicles may exhibit DTCs U2100 and/or U3002 stored in the cruise control module (CCM), side obstacle detection control module LH (SODL), side obstacle detection control module RH (SODR), side obstacle detection control module C (SODCMC) and/or side obstacle detection control module D (SODCMD) after a module replacement. DTC U2100 may set when the module has not been properly configured after replacement. DTC U3002 may set when the module has been configured with the incorrect VIN. To correct this condition, verify that the module storing the DTC has been installed following the applicable Workshop Manual (WSM) Removal and Installation procedure. If the DTC is still stored, download and run the Vehicle Identification Number (VIN) Write application found under Toolbox, Multi-Module tab in the Ford Diagnosis and Repair System (FDRS). |
| SU6 P1 F150 | 2023-10-03. Service bulletin. ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:SOFTWARE; UNKNOWN OR OTHER. "Software Update SU6 P1 for 2021 - 2023 F150 is now available. Quality improvements include: - Digital owner Manual addition (2023MY Only) -Improved ""Ask on Exit"" pop- up functionality - Adds a ""some display features may be temporarily unavailable"" message to the SYNC screen when a SYNC update is installing. - Selectable Drive Modes - prevent default to normal mode due to loss of communication with SYNC - Improved SYNC Display and single toggle addition to disable certain features that will help enhance your towing experience. - Improved instant voice feedback share feature" |
| 23B57 | 2023-10-03. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM); ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION MOTOR:CONTROLLER:SOFTWARE. Certain 2022 and 2023 Model Year F-150 Battery Electric Vehicle (BEV) - High Voltage Battery Module Replacement and/or Battery Energy Control Module (BECM) Software Update |
| TSB 23-2280 | 2023-09-26. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2023 F-150 vehicles may exhibit an illuminated airbag indicator light that may be accompanied by diagnostic trouble codes (DTCs) U3000:41 and/or U3000:54 in the occupant classification system module (OCSM) and/or B00A0:09, B00A0:63, B00A0:64 and/or B00A0:68 in the restraints control module (RCM). |
| TSB 23-2276 | 2023-09-26. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2023 F-150 vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit an illuminated tire pressure monitoring system (TPMS) indicator with diagnostic trouble code (DTC) B124D stored in the BCM. This may be due to the DCACA inverter causing radio frequency interference (RFI). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, follow the Service Procedure to confirm if the inverter is the source of RFI and mitigate the interference. |
| SSM 51838 | 2023-09-04. Service bulletin. ELECTRICAL SYSTEM. In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option. |
| SSM 51893 | 2023-09-04. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2023 F-150 vehicles may exhibit all modules on the HS2, HS3, HS4 and MS CAN networks not responding to the Ford Diagnosis and Repair System (FDRS) and modules on these networks fail the network test. Modules on the FD1 and HS1 networks will communicate with the FDRS. Vehicles equipped with a power opening/closing tailgate may also exhibit an inoperative power tailgate. This may be due to a gateway module (GWM) that is not configured properly. To correct this condition, download and run the GWM - Gateway Module A (GWM) Configuration application. For claiming, use causal part number 14G490 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.