WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

594 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Ignition are shown. Show all

Bulletins, newest first
SSM 518272023-08-14. Service bulletin. ELECTRICAL SYSTEM:IGNITION; UNKNOWN OR OTHER; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2022-2023 F-150 and 2023 Expedition/Navigator vehicles built on or after 01-Oct-2022 equipped with a 3.5L GTDI engine may exhibit reduced engine power on startup and an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P2101 stored in the powertrain control module (PCM). This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers they can remove this condition and continue to drive the vehicle by turning off the vehicle and leaving the vehicle in Key OFF, Engine OFF for at least 30 seconds, then restarting the engine. Engineering is working on a solution that is expected in October 2023. Monitor OASIS for additional information and schedule service appointments once the repair becomes available.
SSM 504122022-02-04. Service bulletin. ENGINE; ELECTRICAL SYSTEM:IGNITION:COIL. Some 2021-2022 F-150 vehicles equipped with a 3.5L EcoBoost engine may exhibit engine misfire concerns with or without DTCs. If diagnostics lead to ignition coil replacement, swap the ignition coil(s) between the misfired cylinder and a known good cylinder. Only replace the ignition coil if the misfire concern follows that particular ignition coil. If the misfire condition does not follow the coil, apply dielectric grease to the boot, reinstall the ignition coil in the original cylinder and continue normal diagnostics in Workshop Manual (WSM), Section 303-07C.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.