WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

594 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
22OTASU3 P2 F1502022-12-08. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Software Update 3 P2 for 2021-2021 Model Year F-150 is now available. Quality Improvements Include: Changing the default trailer profile trailer brake gain from 0 to 15, change to low power mode rearview camera distortion when the vehicle is shut off and restarted quickly without opening the vehicle doors. Improvement to onboard scales and sync camera view interaction.
SSM 511712022-11-29. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2021-2022 F-150 (non-Lightning and non-3.5L PowerBoost), 2022 Expedition/Navigator vehicles may exhibit an illuminated anti-lock brake system (ABS) indicator and stability-traction control indicator with diagnostic trouble code (DTC) C1013:09 stored in the ABS module. This may be due to ABS module software parameters. To correct the condition, update the ABS module to the latest software level using the appropriate scan tool. For claiming, use causal part 2005 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
SSM 511352022-10-25. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2022 F-150 Lightning vehicles equipped with Phone-as-a-Key may exhibit a U3000:49 diagnostic trouble code (DTC) stored in the remote function actuator (RFA) module. This may be due to RFA module software. To correct this condition, reprogram the RFA module using the latest software level of the Ford Diagnosis and Repair System (FDRS). If no update is available, continue with the normal Workshop Manual (WSM) diagnostics. For claiming, use causal part 14G617 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
OTA SU3 F-1502022-10-04. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Software Update 3 for 2021-2022 Model Year F-150 vehicles is now available. Quality Improvements Include: Changing the default trailer profile trailer brake gain from 0 to 15, Fix for low power mode rearview camera distortion when the vehicle is shut off and restarted quickly without opening the vehicle doors. Fix for "Secure My Assets" and "Auto Clock Update".
SSM 508802022-06-30. Service bulletin. STRUCTURE:BODY:TAILGATE; BACK OVER PREVENTION:SOFTWARE. Some 2021-2022 F-150 vehicles built on or before 22-Mar-2022 at Dearborn Truck Plant or built on or before 11-May-2022 at Kansas City Assembly Plant and equipped with power tailgate release may exhibit a perceived inoperative power tailgate latch release function. This may be due to a change to the power tailgate release strategy after the body control module (BCM) has received a software update or the BCM has been replaced. When using the power tailgate release switch in the instrument panel, release switch on the tailgate, or the remote keyless entry (RKE) fob, the power tailgate release switch must be pressed 2 times (2x) within 3 seconds with the transmission in Park for the tailgate to release. If the power tailgate release is still inoperative, refer to Workshop Manual (WSM), Section 501-14 for normal diagnostics.
SSM 508342022-06-17. Service bulletin. ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SENSORS; ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SOFTWARE. Some 2022 F-150 Lightning vehicles not equipped with the remote park assist may experience an inoperative power frunk when using the exterior frunk button. Vehicles not equipped with the remote park assist feature will not have the front antennas for a passive key fob search. To open and/or close the frunk from only the exterior button on vehicles without remote park assist, the vehicle must be 2-stage unlocked. The frunk can also be opened by first pressing the instrument panel or SYNC screen button then using the exterior frunk button when the vehicle is single-stage or 2-stage unlocked. The key fob frunk button can be used to open and/or close the frunk regardless of lock status. Engineering is currently investigating a software update to enhance power frunk operation. A software update is anticipated late Q4 2022. Continue to monitor OASIS for updates.
SSM 507152022-05-03. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2021-2022 Mustang Mach-E/F150/Edge/Nautilus vehicles equipped with SYNC Gen 4 may experience a loss of Bluetooth pairing after a key cycle after accessory protocol interface module (APIM) replacement and programming or a software update. This may be due to APIM software. To correct the concern: 1. Perform master reset via settings > general settings > reset > master reset. 2. Make sure customer device is up to date. 3. Reboot customer device. For claiming, use causal part -14G670- and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 22-21052022-03-22. Service bulletin. ELECTRICAL SYSTEM:ADAS:AUTONOMOUS/SELF DRIVING:SOFTWARE; EQUIPMENT. Some 2021-2022 F-150/Mach-E vehicles equipped with BlueCruise may experience loss of BlueCruise hands-free driving mode availability. This may be due to an expired BlueCruise map file in the gateway module (GWM). To correct the condition, follow the Service Procedure to update the GWM.
SSM 503882022-02-04. Service bulletin. LANE DEPARTURE: SENSING SYSTEM: CAMERA; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Some 2020-2022 F-Super Duty/Explorer/Aviator and 2021-2022 F-150 vehicles may exhibit a Front Camera Fault, Lane Keeping Fault, and/or Collison Warning Not Available message with various diagnostic trouble codes (DTC) stored in the image processing module A (IPMA). If programming fails or Ford Diagnosis and Repair System (FDRS) states a file failed to flash after replacing the IPMA or reprogramming IPMA software, test the battery using any approved Rotunda tool including the GR-190, GRX-3590, and DCA-8000. Fully recharge or replace the battery according to results of the tool. Set the battery charger to maintain battery voltage between 12.6 and 13.6 volts during the entire programming procedure. The IPMA programming procedure may take several hours to complete due to the size of the software files required.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.