WenmarOpen by Wenmar Pro

Service bulletins for the 2017 Ford Escape

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

249 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SSM 474162018-09-10. Service bulletin. EQUIPMENT; SUSPENSION. Some 2013-2018 Escape vehicles may exhibit damaged or delaminated bushing(s) on the rear suspension front lower arm (dog bone). If the rear suspension front lower arm requires replacement, an updated part BV6Z-5500-D with a solid bushing is available. Refer to Workshop Manual (WSM), Section 204-02 for removal and installation.
SSM 473972018-09-10. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some 2016-2018 Escape/Focus/Transit Connect vehicles equipped with a remote start system may exhibit an immediate engine shut off with or without diagnostic trouble code (DTC) P1594 stored in the BCM after using the remote start function to start the engine. If using FordPass, the app will indicate that the vehicle started successfully, but the engine may not have started or may start and then immediately shut off. Reprogram the BCM using the appropriate Ford scan tool or equivalent release 110.02 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. For claiming, use causal part 14A068 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
tsb18-22102018-09-10. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2017-2018 Escape vehicles equipped with a 1.5L EcoBoost engine and built on or before 1Jun2018 may exhibit an illuminated MIL with diagnostic trouble code (DTC) P051B stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.
tsb18-21932018-09-10. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). This article supersedes TSB 16-0107 to update the Service Procedure. Some 2017 Escape vehicles equipped with an auto start/stop system and built on or before 18-May-2016 may exhibit DTC P1935 stored in the powertrain control module (PCM) on vehicles equipped with a 1.5L/2.0L engine and/or DTC P061E stored in the PCM on vehicles equipped with a 2.0L engine. Follow the Service Procedure steps to correct the condition.
tsb18-21782018-09-10. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2017-2018 Escape vehicles equipped with a 1.5L EcoBoost engine and built on or before 01-Jun-2018 may exhibit an illuminated MIL (wrench) lamp with diagnostic trouble code (DTC) P061E stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.
18M022018-07-23. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. Certain 2017 Model Year Multiple Vehicle Lines - California Emission Warranty Parts Coverage
SSM 473802018-07-23. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some 2016-2018 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
SSM 473792018-07-23. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Various 2016-2018 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
SSM 473352018-07-23. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2017-2018 Escape and 2017-2019 MKC vehicles may exhibit a lack of A/C cooling performance during PDI. This may be due to a insufficient/low refrigerant charge. If a vehicle displays a lack of cooling performance during PDI, inspect for a leak. Refer to the diagnostics in Workshop Manual (WSM), Section 412-00 for A/C leak detection. Many times when the system is only evacuated and refilled to the proper level at PDI the customer will return for a lack of cooling performance concern. A refrigerant leak will usually be identified as the root cause.
SSM 470432018-06-11. Service bulletin. ENGINE. Some 2017 Escape vehicles may exhibit an auto stop/start concern when the vehicle does not auto restart. The concern can occur at a stop where the vehicle will perform an auto stop/start event. Upon attempting to restart, the instrument panel may display a message instructing the customer to shift the vehicle to park and start the vehicle manually. This concern may be intermittent and difficult to duplicate. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
SSM 470412018-06-11. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL; ELECTRICAL SYSTEM. Various 2016-2017 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
SSM 470402018-06-11. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; EQUIPMENT:ELECTRICAL. Some 2017-2018 Escape vehicles may exhibit inoperative climate or radio controls with DTCs U2100, U0140 in the FCIM or DTC U0164 in the body control module (BCM). This may be due to loss of communication or incomplete module configuration. Before further diagnosis, complete a battery reset per the Workshop Manual (WSM), Section 414-01. Clear the DTCs and complete a FCIM self-test. If the DTCs are no longer present, no further action is required. For claiming, use causal part 19980 and applicable labor operations in section 11 of the service labor time standards (SLTS) manual.
SSM 470092018-06-11. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 470002018-06-11. Service bulletin. ENGINE; POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE). Some 2013-2018 Escape/Fusion/MKZ vehicles equipped with 2.5L or 1.5L/2.0L/3.0L Ecoboost engine, 2015-2018 MKC/Edge/Explorer vehicles equipped with 2.0L/2.3L/2.7L EcoBoost engine, 2016-2018 MKX vehicles equipped with 2.7L Ecoboost engine, 2017-2018 Continental vehicles equipped with 2.7L/3.0L EcoBoost, and AWD may exhibit a fluid leak from the PTU intermediate shaft seal. Replacement of the intermediate shaft seal seal does not require removal of the PTU and does not require the use of the cover seal and bolt kit (CV6Z-7275-K) to perform the repair. Refer to the Workshop Manual (WSM), Section 308-07.
SSM 470432018-05-29. Service bulletin. ENGINE AND ENGINE COOLING. Some 2017 Escape vehicles may exhibit an auto stop/start concern when the vehicle does not auto restart. The concern can occur at a stop where the vehicle will perform an auto stop/start event. Upon attempting to restart, the instrument panel may display a message instructing the customer to shift the vehicle to park and start the vehicle manually. This concern may be intermittent and difficult to duplicate. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
SSM 470412018-05-29. Service bulletin. EQUIPMENT:ELECTRICAL. Various 2016-2017 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
SSM 470402018-05-29. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. Some 2017-2018 Escape vehicles may exhibit inoperative climate or radio controls with DTCs U2100, U0140 in the FCIM or DTC U0164 in the body control module (BCM). This may be due to loss of communication or incomplete module configuration. Before further diagnosis, complete a battery reset per the Workshop Manual (WSM), Section 414-01. Clear the DTCs and complete a FCIM self-test. If the DTCs are no longer present, no further action is required. For claiming, use causal part 19980 and applicable labor operations in section 11 of the service labor time standards (SLTS) manual.
SSM 470092018-05-29. Service bulletin. EQUIPMENT:ELECTRICAL. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 470002018-05-29. Service bulletin. ENGINE AND ENGINE COOLING. Some 2013-2018 Escape/Fusion/MKZ vehicles equipped with 2.5L or 1.5L/2.0L/3.0L Ecoboost engine, 2015-2018 MKC/Edge/Explorer vehicles equipped with 2.0L/2.3L/2.7L EcoBoost engine, 2016-2018 MKX vehicles equipped with 2.7L Ecoboost engine, 2017-2018 Continental vehicles equipped with 2.7L/3.0L EcoBoost, and AWD may exhibit a fluid leak from the PTU intermediate shaft seal. Replacement of the intermediate shaft seal seal does not require removal of the PTU and does not require the use of the cover seal and bolt kit (CV6Z-7275-K) to perform the repair. Refer to the Workshop Manual (WSM), Section 308-07.
SSM 472312018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. Some 2017-2018 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit a timing belt saw or chirp type noise at idle while the vehicle is in transport mode. The noise is noticeable because of an elevated idle speed while the vehicle is in transport mode. Do not remove the vehicle from transport mode to diagnose or perform a repair for this noise. Vehicle should only be removed from transport mode as directed by the pre-delivery procedure.
SSM 472282018-05-21. Service bulletin. SEATS; ELECTRICAL SYSTEM. Some 2015-2017 Escape vehicles built on or before 5-Apr-2017 with factory trailer tow may exhibit a concern with a trailer lamp out warning and/or BLIS not available warning without a trailer connected. Access connectors C439 (4 pin) and C432 (12 pin) in the trailer tow harness. Inspect for corrosion and/or water contamination. Clean as required and add electrical grease (XG-12). Install and fully seat cover on C439 to prevent future water entry. Reprogram the trailer module (TR) using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 105.04 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. For claiming, use causal part 15K868 and applicable labor operations in Section 10 of the SLTS Manual, use causal part 19H332 for reprogram.
SSM 472112018-05-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Some 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 version 2.2 software may exhibit a blank screen after attempting to exit Valet mode. SYNC software updates are now available under the OASIS Tab SYNC selection. If update is available, refer to WSM Section 415-00 and update APIM software. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
SSM 472042018-05-21. Service bulletin. ENGINE AND ENGINE COOLING. Some 2015-2018 Fusion/MKZ/MKC/Escape/Edge vehicles equipped with a 2.0L EcoBoost engine may exhibit a runs rough condition with DTCs P0300, P0301, P0302, P0303, P0304 and/or P0316. This may be due to coolant intrusion due to corrosion on the engine block. To diagnose this concern, with the engine at normal operating temperature, pressurize the cooling system to 138 kPa (20 psi) and hold for 5 hours. If the coolant pressure drops 27.57 kPa (4psi), remove the spark plugs and inspect for coolant in the cylinders. If coolant is found in any of the cylinders, replace the engine long block assembly. Follow normal prior approval process for your Dealership. However, follow the diagnostic repair procedure in this article to determine correct repair. For claiming, use causal part 6006 and applicable labor operations in Section 6 of the SLTS Manual.
SSM 472012018-05-21. Service bulletin. EQUIPMENT. Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
SSM 471872018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES; ENGINE AND ENGINE COOLING. Some 2017-2018 Escape/Focus/Transit Connect vehicles equipped with remote start may exhibit the engine shut off after using the remote start function to start the vehicle with DTC P1594 stored in the BCM. If using the FordPass app, the app will tell the customer that the vehicle started successfully, but the customer observes that the vehicle did not start or started then shut off. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.