WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Chevrolet Camaro

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1709 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
15-06-03-002F2017-08-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
11-00-89-005K2017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
10-08-110-001F2017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides information on proper use of floor mats.
03-06-03-004U2017-08-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
PIC6111C2017-08-15. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about vehicles equipped with radio Regular Production Option Code UFU, UP9, UHQ, UHK, UFW, UHR, UHJ, or UFF when the display shows Theft Locked. Technician will pull the radio fuse for five minutes and reevaluate the concern. If the concern is no longer present, release the vehicle to the customer and advise that we are working on a permanent solution for this concern.
PIT5236G2017-08-15. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will check Global Warranty Management system for customer satisfaction program 15086 status. If the status of the customer satisfaction program 15086 was not completed follow the steps to get the Telematics Communication Interface Control Module replaced. If the status of customer satisfaction program 15086 is found completed contact General Motors Technical Assistance Center OnStar group for further assistance.
PIP5331B2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING. This Preliminary Information communication provides information to the technician that some vehicles may have rattle, tick, or knock type noise. If there are any drivability concerns they should be addressed prior to the following diagnostic progression. Technician will take a sound file or video with sound of the noise prior to dis-assembly. Technician may find this noise hard to isolate to one area in the engine. There are four different steps to take to diagnosis the concern. Technician will perform injector diagnosis to ensure there are no leaking injectors causing a noise due to excessive fuel in any one cylinder. Replace any out of specification injectors the reevaluate for the noise. Technician will remove the intake manifold and visually inspect for excessive carbon on the intake valve stems and top of the valve causing noise. If carbon is present then follow the latest version of PIP5029 to clean the valves or replace heads as needed. Technician will remove the cam cover of the affected bank (both if needed) to inspect for soft or spongy stationary hydraulic lash adjusters. Push down on the rocker end at the stationary hydraulic lash adjusters to test for soft or spongy. If soft or spongy stationary hydraulic lash adjusters are found, carefully remove the affected head and inspect the oil passage below the head gasket for debris. If debris is found, inspect the camshaft caps for wear or discoloration due to lack of oil. During inspection if wear or discoloration is found then replace the cylinder head assembly with camshafts. If there is no wear or discoloration, clean the oil passages and replace the head gasket. Technician will use chassis ears or a stethoscope; listen to the right and left side of the engine. Once the noise is isolated or if unable to isolate, remove the piston and rod assemblies from the affected bank(s) to inspect for either; a loose rod bushing in the rod, or a loose wrist pin in the bushing. If this is found, replacing the piston an
PIC6160C2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN; EQUIPMENT; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles were the engine cooling fan intermittently stops working. This concern may be caused by water intrusion into the forward lamp harness. If the wiring harness is stretched, or side loaded, where the cooling fan module connector plugs in, this may allow water to wick down the harness, past the weather pack seals, and into the connector itself. Technician will first need to inspect the forward lamp wiring harness to cooling fan module connector for the presence of moisture and/or corrosion. If either is found, the fan control module and the forward lamp harness will both need to be replaced. If no water or corrosion is found after inspecting this connection, refer to Service Information continue with regular diagnosis. If components are replaced the technician will gain access to G101 and G102. With access to both to both G101 and G102 remove any corrosion that is found on either ground. When the grounds are clean and free of corrosion, apply about a half inch length of butyl tape around the wire connection to the ground screw. Once this has been done, cut two patches of butyl, about 2.5 inch square, and apply over the ground screw on both chassis grounds.
PIC61872017-08-15. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication advises the technician that some vehicles intermittently the favorites saved from a USB drive or SD card are grayed out and not selectable. Please communicate to the customer that we apologize for this inconvenience and that General Motors is currently evaluating this concern.
PIC61862017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication advises the technician that some vehicles may have a radio that turns on unwanted at start up. If the radio was shut off before the vehicle was shut off and at start up the radio turns on, please communicate to the customer that we apologize for this inconvenience, and that General Motors is working on a solution for this concern.
PIT5268A2017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication advises the technician that some vehicles may have a radio display that is covered when the radio station favorites list is maximized. This is a normal operating characteristic and no repair attempt should be made. The hidden screen functions will operate again after the user minimizes the favorites list by dragging it to the bottom of the display.
PIP53862017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician with the steps to diagnose and repair vehicles that have Malfunction Indicator Lamp on with Diagnostic Trouble Codes P0264 or P0265 and P0300. This may be due to a wiring concern at the #2 fuel injector. Technician will gain access to the fuel injector be removing the intake manifold. Inspect the fuel injector wiring for #2 fuel injector for a rub condition on the water outlet bolt boss. If there is no rub found, continue with normal diagnosis in Service Information for these codes. If a rub or chafe wiring concern is found repair the wires with shrink tube.
PIC61852017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). This Preliminary Information communication provides information to the technician with a diagnostic tip for navigation radios that have inaccurate entries at times when using the voice recognition to input the address. When using the Navigation command "Address" or "Destination" this Allows an address to be stated as a one-shot method. When using the Navigation command "Directed Address" this Allows an address to be stated one step at a time. Directed address option may be a better choice for entering that address.
PIP5307C2017-08-15. Service bulletin. ENGINE. This Preliminary Information communication advises the technician High Feature V6 generation two engine exchange program has ended for model year 2016 vehicles with Vehicle Identification Number (S) and engine Regular Production Option Code LGX. This engine can now be ordered through the regular General Motors Service Parts Operations parts process or Product Quality Center process for required dealers.
PIP5232C2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the coil grounds ring terminal at the engine block for the bank with the concern and repair the wire.
PIP5130H2017-08-15. Service bulletin. ENGINE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician how to diagnose and repair a vehicle with an engine that runs with an intermittent crank no start with a Diagnostic Trouble Code P0011 or P00C6 current or history. The Camshaft Position Actuator Solenoid Valve may be sticking or binding causing the valve timing to be retarded. Dealer will need to cycle the Camshaft Position Actuator Solenoid Valve by energizing it using Global Diagnostic System 2.
PIP53732017-08-15. Service bulletin. ELECTRICAL SYSTEM; ENGINE. This Preliminary Information communication provides the technician with steps on how to program an Engine Control Module when getting a Service Programming System error code E4491 or E4423. In some cases Techline Customer Support Center may need to be contacted to resolve the issue.
PIP5374A2017-08-15. Service bulletin. ENGINE; EQUIPMENT ADAPTIVE/MOBILITY. This Preliminary Information communication provides information to the technician on how to diagnose and repair the vehicles with engine Regular Production Option Code LT1 or LT4 with no oil pressure. Technician will gain access to the engine oil pan and look for the raised marking if there is a marking by the part number the vehicle will need to repaired if the marking is not there follow Service Information diagnostic for Oil Pressure Diagnosis and Testing. For vehicles with the mark on the oil pan inspect pickup tube to see if dislodged. If the pickup tube is dislodged, main bearings will need to be inspected. For vehicles were the pickup tube is not dislodged replace the pickup tube bolts with part number 11519374. Technician will clean the bolts holes and apply Loctite 243 to threads of new bolts.
PIC6160B2017-08-15. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN. This Preliminary Information communication provides information to the technician with the step to diagnose and repair vehicle that may have an engine cooling fan that is inoperative with Diagnostic Trouble Code P0480 of P0691. Dealer will need to inspect forward lamp harness water intrusion and replace the damaged harness and components.
PIC61772017-08-15. Service bulletin. EQUIPMENT. This Preliminary Information communication provides the technician with information on vehicles with navigation radio Regular Production Option Code IO6 or UY4 that defaults to West Virginia instead of Virginia on a manual entry. General Motors engineering is currently working on a solution for this concern.
PIC61762017-08-15. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication advises the technician when the radio display is continuously flashing on and off every five seconds the Human Machine Interface will need to be replaced.
PIC6163A2017-08-15. Service bulletin. LATCHES/LOCKS/LINKAGES:HOOD:LATCH. This Preliminary Information communication provides information to the technician about vehicles that have several fasteners, located on either side of the hood latch, appear to be loose. Do not tighten, or otherwise move these two fasteners. These fasteners are part of the front fascia support bracket. They have a preset gap by design, and they have Loctite applied to the threads of the fastener so that this preset gap does not change.
PIP54932017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary information communicates diagnostic tips for misfires on active fuel management cylinders and engineering investigations into cylinder 6 misfire on XT5 and cylinder 4 misfire on LaCrosse both of which are 2017.
PIP5234C2017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; FUEL SYSTEM, GASOLINE. This Preliminary Information communication advises the technician when Service Information diagnostics indicates a fuel injector may need to be removed for a repair or replaced the injector will need a new seal. This Preliminary Information contains all the O-ring seal and the injector kit part numbers.
PIP5447B2017-08-15. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code P3400 setting. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.