WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Nissan Frontier

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

115 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
NTB21-019B2023-04-10. Service bulletin. EXTERIOR LIGHTING; STRUCTURE. FRONT MAP LAMP NOT WORKING OR SWITCH COMING APART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB19-071C2023-04-10. Service bulletin. SEATS; AIR BAGS. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB19-042D2023-04-07. Service bulletin. FORWARD COLLISION AVOIDANCE. AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB12-055J2023-04-06. Service bulletin. POWER TRAIN. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB10-145B2023-04-06. Service bulletin. SERVICE BRAKES, HYDRAULIC. ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB23-0142023-03-07. Service bulletin. ELECTRICAL SYSTEM. WIRELESS CHARGER DOES NOT CHARGE IPHONE 12 OR NEWER IF YOU CONFIRM The customer states that their Wireless Charger does not charge an iPhone 12 or newer. HINT: The customer may describe that when an iPhone is placed on the Wireless Charger, the indicator light illuminates orange, but after approximately 15 seconds it flashes and turns off, and does not charge the phone. ACTION 1. Confirm the current Wireless Charger part number is in Table 1 on page 4. 2. Reprogram the Wireless Charger, if applicable.
NTB20-010C2023-03-07. Service bulletin. VISIBILITY; STRUCTURE. WINDSHIELD WIPER BLADE PERFORMANCE/DIAGNOSIS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB13-028H2023-03-07. Service bulletin. VISIBILITY; STRUCTURE. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB10-126C2023-03-07. Service bulletin. WHEELS. WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB09-081J2023-03-07. Service bulletin. VISIBILITY; STRUCTURE. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB08-097K2023-03-07. Service bulletin. STEERING. DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB20-075D2023-02-18. Service bulletin. ELECTRICAL SYSTEM. SOFTWARE UPDATE POP-UP NOTIFICATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
REVISION 1 PC9292023-02-08. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC; EXTERIOR LIGHTING. Stop Lamp CHMSL Harness Dealer Inventory UPDATE January 19, 2023 Please discard earlier versions of this bulletin. The announcement from January 18, 2023 has been revised to include the following: • The part number for Terminal Joint (Red Solder Sleeve) has been revised: • The revised part number is 24HRK-9002R Solder Sleeve Red (Package of 25 Sleeves) o A single package of sleeves can remedy approximately 6 vehicles • This remedy requires four (4) solder sleeves per vehicle repaired • Note: Claim reimbursement is per solder sleeve unit used in each vehicle repair • Part number 25320-3KA0A Clip has been removed and is not required for this remedy
PC929 2022-23 Fr2023-02-08. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Stop Lamp CHMSL Harness Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to add a relay to the stop lamp CHMSL harness and reprogram the ABS control module on specific MY2022-2023 Nissan Frontier vehicles identified in Service Comm and National Service History – Open Campaigns to prevent against a potential no start condition. Use the attached procedure to remedy any vehicles affected by this quality action prior to sale. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC929 • New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to NPSB 15-460 for additional information • Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3. Use the attached procedure to remedy any vehicles affected by this quality action prior to sale. 4. Once remedied, dealers should submit the applicable warranty claim for the action performed to close the campaign notice in Service Comm/NSH and release the vehicle for sale.
NTB22-027A2023-02-07. Service bulletin. ELECTRICAL SYSTEM. DTC B2E01-96 (INTERNAL BATTERY) STORED AS CURRENT IN IVC This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB20-085B2023-02-07. Service bulletin. COMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB22-1042023-01-10. Service bulletin. STRUCTURE. DIAGNOSING DOOR LOCK OPERATION SERVICE INFORMATION If a customer describes a concern of a door not opening and/or unlocking properly, on any of the APPLIED VEHICLES, use the Questions for the Customer below to help reproduce the concern, and then follow the SERVICE PROCEDURE starting on page 2 to determine if the Door Lock should be replaced. • Do not replace a Door Lock unless instructed to by the SERVICE PROCEDURE. Questions for the Customer: • When did you first notice the issue? • Is it consistent or intermittent? • Under what conditions does it occur? • Does it seem more likely to happen to a specific passenger/person in your family? • Has there been any change to the issue since it first began?
NTB22-1032023-01-10. Service bulletin. ELECTRICAL SYSTEM. INFOTAINMENT CONTROL UNIT REPLACEMENT SERVICE INFORMATION SERVICE INFORMATION When replacing an AV Control Unit (Infotainment Control Unit), for any reason, all three steps below are required. If all three steps are not completed on vehicles equipped with a TCU, the Over The Air (OTA) updates will not work, and other functions may be inoperative. HINT: Not all APPLIED VEHICLES are OTA-update capable. 1. Reprogram the AV control unit. 2. Configure the AV control unit. 3. Write the VIN to the AV control unit. IMPORTANT: Steps 1-3 above must be performed in the sequential order shown below.
NTB22-1012022-12-06. Service bulletin. POWER TRAIN. DRIVE SHAFT BOOT SERVICE INFORMATION SERVICE INFORMATION If a Drive Shaft (Axle Shaft) Boot on an APPLIED VEHICLE is found to be leaking grease, AND There is no abnormal noise or obvious CV Joint risk due to water intrusion and/or complete grease loss, check for REPAIR KIT-DUST BOOT (CV Joint Boot Kit) availability. • If there is a REPAIR KIT-DUST BOOT (CV Joint Boot Kit) available for the vehicle being repaired, do NOT replace the axle. Install a new boot kit following the procedure in the ESM. o Refer to the ESM: TRANSMISSION & DRIVELINE > FRONT AXLE > REMOVAL AND INSTALLATION > FRONT DRIVE SHAFT BOOT o If the complete axle (drive shaft) is replaced when only a new boot is required, the over-repair may be charged back to the dealer. • If there is NOT a REPAIR KIT-DUST BOOT (CV Joint Boot Kit) available for the vehicle being repaired, refer to the ESM for further diagnostic information. IMPORTANT: When servicing vehicles with staked axle nuts, refer to NTB21-013 to prevent Drive Shaft thread damage.
NTB22-035A2022-12-06. Service bulletin. SEATS. REAR SEAT CUSHION DOES NOT LOCK INTO POSITION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB20-029F2022-11-12. Service bulletin. ELECTRICAL SYSTEM. TELEMATICS (IVC) SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
NTB22-0922022-11-07. Service bulletin. POWER TRAIN. MIL ON WITH GEAR RATIO DTCS STORED IN THE TCM SERVICE INFORMATION If one or more of the following DTCs is stored in the TCM as current or past, please check Service COMM or Dealer Business Systems (DBS) National Service History to confirm if campaign R22B1 or R22A9 has been applied. • P0731 – 1GR INCORRECT RATIO • P0732 – 2GR INCORRECT RATIO • P0733 – 3GR INCORRECT RATIO • P0734 – 4GR INCORRECT RATIO • P0735 – 5GR INCORRECT RATIO • P0729 – 6GR INCORRECT RATIO • P076F – 7GR INCORRECT RATIO • P07D9 – 8GR INCORRECT RATIO • P07F6 – 9GR INCORRECT RATIO • P0893 – MULTIPLE GEARS ENGAGED 1. Has campaign R22B1 or R22A9 and the drive cycle (after performing the campaign) on page 2 of this bulletin already been completed? • No: a. Complete the related campaign. b. Perform the drive cycle on page 2, and then proceed to step 2. • Yes: Proceed to step 2. 2. If one or more of the DTCs, listed above are still being stored as current or past, refer to the ESM for further diagnostic information not covered by this bulletin.
NTB22-0872022-10-07. Service bulletin. POWER TRAIN. NOISE AND/OR VIBRATION FROM FRONT OR REAR PROPELLER SHAFT SERVICE INFORMATION If you confirm abnormal noise and/or vibration is coming from the front or rear propeller shaft of an APPLIED VEHICLE, inspect the propeller shaft journals (U-Joints) for binding and/or abnormal noise before replacing the propeller shaft. If binding and/or abnormal noise is confirmed from the propeller shaft U-Joints, replace the propeller shaft U-Joints. Refer to the ESM for the propeller shaft U-Joint replacement procedure. NOTE: Replacement of the propeller shaft due to noise and/or vibration caused by the propeller shaft U-Joints may result in warranty charge back.
NTB22-0842022-10-07. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. DTC C1116 AND/OR C1142 STORED IN THE ABS CONTROL MODULE IF YOU CONFIRM Customer states the ABS warning light is ON and “System fault See Owner’s Manual” appears in the message center (Figure 1), AND DTCs C1116 (Stop Lamp Switch) and/or C1142 (Press Sen Circuit) are stored in the ABS Control Module. ACTION Follow the SERVICE PROCEDURE in this bulletin to: 1. Install the Center High Mount Stop Lamp (CHMSL) Relay and Jumper Harness. 2. Install a new Stop Lamp Switch. 3. Reprogram the ABS Control Module. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
NTB22-029A2022-10-07. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; ELECTRICAL SYSTEM. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.