Service bulletins for the 2022 Nissan Frontier
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
115 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| NTB21-119B | 2022-10-07. Service bulletin. ELECTRICAL SYSTEM. INFOTAINMENT SYSTEM REBOOTS EVERY 4-5 MINUTES This bulletin has been superseded by: NTB22-060 / Campaign # PC901 VOLUNTARY SAFETY RECALL CAMPAIGN INFOTAINMENT SYSTEM REBOOTS EVERY 4-5 MINUTES OR NTB22-061 / Campaign # PC902 VOLUNTARY SAFETY RECALL CAMPAIGN INFOTAINMENT SYSTEM REBOOTS EVERY 4-5 MINUTES OR NTB22-062 / Campaign # R22A5 VOLUNTARY SAFETY RECALL CAMPAIGN INFOTAINMENT SYSTEM REBOOTS EVERY 4-5 MINUTES • Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. • Please discard previous versions of this bulletin. |
|---|---|
| NTB12-055I | 2022-10-07. Service bulletin. POWER TRAIN. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| REVISION 2 PC916 | 2022-09-17. Service bulletin. POWER TRAIN. Automatic Transmission REVISED September 2, 2022 Please discard earlier versions of this bulletin. The announcement from August 29, 2022 has been revised to include the following: • Affected population added • SERVICE COMM activation date added • Frequently Asked Questions (FAQ) section added • Campaign ID added |
| REVISION 1 2020- | 2022-08-31. Service bulletin. POWER TRAIN. Automatic Transmission REVISED August 29, 2022 Please discard earlier versions of this bulletin. The announcement from August 25, 2022 has been revised to include the following: • This Quality Assurance Hold has been amended to include all 2023 Nissan Z vehicles equipped with automatic transmission. |
| NTB22-075 | 2022-08-31. Service bulletin. SEATS. DRIVER’S POWER SEAT RECLINES UNINTENTIONALLY SERVICE INFORMATION Refer to the information in this bulletin when diagnosing a customer concern of the driver’s (LH) power seat recline position changing unintentionally on a 2022-2023 Frontier. Not all customer concerns mean there are broken or malfunctioning parts. Use this information to help explain normal operation to the vehicle owner. The driver’s seat recline switch (Figure 1) can be bumped when exiting/entering the vehicle (Figure 2), resulting in unintentional recline of the seat upper. Do not replace the side finisher/switch unless visible damage to the seat switch is present. |
| NTB14-012H | 2022-08-30. Service bulletin. ELECTRICAL SYSTEM. REMOTE ENGINE START NOT WORKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| 2020-22 Frontier | 2022-08-30. Service bulletin. POWER TRAIN. Transmission *****Dealer Announcement***** Nissan is committed to a high level of customer service and satisfaction. This commitment requires Nissan to periodically place certain vehicles on temporary Quality Assurance (QA) Hold to ensure that these vehicles, as delivered to our customers, meet our exacting standards and our customers’ expectations. Effective immediately, Nissan is placing a temporary Quality Assurance Hold on all 2020-2022 Nissan Frontier and 2020-2023 Nissan Titan vehicles due to an investigation of a potential transmission issue. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. Dealers may continue to repair vehicles subject to Recall R22A1 and R22A7; however these vehicles are subject to this quality hold after repair. *****What Dealers Should Do***** 1. Please do not drive, loan, rent, sell or trade the specific vehicles in dealer inventory subject to this quality hold. 2. Nissan is currently investigating a potential concern with the transmission. Additional information on next steps will be provided as soon as possible. |
| NTB22-035 | 2022-08-27. Service bulletin. SEATS. REAR SEAT CUSHION DOES NOT LOCK INTO POSITION IF YOU CONFIRM One or both rear seat cushions do not lock into position. ACTION Refer to the SERVICE PROCEDURE in this bulletin to replace both outboard rear seat cushion hinge assemblies and the pivot bushings. |
| NTB21-119A | 2022-08-27. Service bulletin. ELECTRICAL SYSTEM. INFOTAINMENT SYSTEM REBOOTS EVERY 4-5 MINUTES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB20-068A | 2022-08-27. Service bulletin. POWER TRAIN. TRANSFER CASE SEAL SERVICE PARTS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB22-029 | 2022-06-08. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRONIC STABILITY CONTROL (ESC); ELECTRICAL SYSTEM. SOFTWARE UPDATE FOR INFOTAINMENT ISSUES SERVICE INFORMATION IMPORTANT: • Refer to NTB21-038 to verify if the customer concern is a Hardware or Software related issue. This bulletin does not apply to hardware issues. The software update in the following SERVICE PROCEDURE is to address the items below: • Stability improvements and "bug" fixes Refer to steps 1 - 5 starting on page 3 to confirm that this bulletin applies. |
| NTB22-027 | 2022-06-08. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY; COMMUNICATION:MANUFACTURER TELEMATICS; ENGINE. B2E01-96 (INTERNAL BATTERY) DTC STORED AS CURRENT IN IVC SERVICE INFORMATION CONSULT has been updated to allow DTC B2E01-96 (Internal battery) to be cleared in the Telematics Control Unit (TCU). If DTC B2E01-96 is Current/Active in the TCU, and No additional Current/Active DTCs are present in the TCU, perform the SERVICE PROCEURE starting on page 2. |
| NTB22-026 | 2022-06-08. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:FUEL GAUGE:FUEL LEVEL FLOAT/SENSOR/SENDING UNIT; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; FUEL SYSTEM, DIESEL; FUEL SYSTEM, GASOLINE. SERVICE INFORMATION FOR FUEL GAUGE INACCURATE WITH DTCS STORED IN ECM SERVICE INFORMATION If a fuel level sensor has been diagnosed as sending an incorrect level signal, and one or more of the following DTCs are stored in the ECM, do not replace the entire “Fuel Level Sensor Unit, Fuel Filter and Fuel Pump Assembly” (fuel pump assembly). The fuel level sensor can be replaced separately. • P0460 (FUEL LEV SEN SLOSH) • P0461 (FUEL LEVEL SENSOR) • P0462 (FUEL LEVL SEN/CIRC) • P0463 (FUEL LEVL SEN/CIRC) NOTE: Warranty claims referring to fuel level issues that result in the replacement of the entire fuel pump assembly will be charged back. |
| NTB20-085A | 2022-06-08. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. TELEMATICS CONTROL UNIT RESET AFTER AUTOMATIC COLLISION NOTIFICATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB19-071B | 2022-06-03. Service bulletin. AIR BAGS. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB22-020 | 2022-05-20. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:WIRING:SWITCHES/KNOBS/BUTTONS. SERVICE INFORMATION FOR BRAKE SWITCH ADJUSTMENT FOR DTC C1142 AND/OR C1116 STORED SERVICE INFORMATION DTC C1142 (PRESS SEN CIRCUIT) and/or C1116 (STOP LAMP SW) may be stored if the Stop Lamp Switch and/or the Brake Pedal Position Switch are out of adjustment. Before replacing any components for DTCs C1142 (PRESS SEN CIRCUIT) and/or C1116 (STOP LAMP SW), stored as past or current, confirm that the Stop Lamp Switch and the Brake Pedal Position Switch are properly adjusted. If either the Stop Lamp Switch and/or the Brake Pedal Position Switch are found to be out of adjustment, adjust them as per the ESM, and then clear the DTCs and perform DTC confirmation. • Refer to the ESM: BRAKES > BRAKE SYSTEM > PERIODIC MAINTENANCE > BRAKE PEDAL > Adjustment |
| NTB22-015 | 2022-05-20. Service bulletin. UNKNOWN OR OTHER. REAR SLIDING CENTER GLASS SEAL LOOSE OR DETACHED IF YOU CONFIRM One or more of the rear sliding center glass seals is loose or detached (Figure 1). ACTION Do not replace the complete rear window assembly. Follow the SERVICE PROCEDURE in this bulletin to replace any loose or detached rear sliding center glass seals. |
| NTB20-029E | 2022-05-20. Service bulletin. COMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM. TELEMATICS (IVC) SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin. |
| NTB22-009 | 2022-03-15. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES:DOORS:LOCK. DOOR LOCK SERVICE INFORMATION SERVICE INFORMATION If either the front driver (LH) side or front passenger (RH) side door lock is replaced and does not already have foam applied to the lock knob cable, as shown in Figure 1, self adhessive EPDM semi-closed cell foam (foam) must be applied. • Apply 130 mm of foam to the lock side • Apply 60 mm of foam to the handle side |
| NTB21-019A | 2022-03-12. Service bulletin. ELECTRICAL SYSTEM. FRONT MAP LAMP NOT WORKING OR SWITCH COMING APART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB18-071B | 2022-03-12. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE:SOFTWARE; ELECTRICAL SYSTEM. SECURITY ALARM SOUNDS AFTER USING MECHANICAL KEY TO UNLOCK DRIVER DOOR This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB17-127B | 2022-03-12. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM. NISSAN; INTELLIGENT KEY INITIALIZATION PROCEDURE STOPS OR WILL NOT CONTINUE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin. |
| NTB17-082E | 2022-03-12. Service bulletin. FUEL SYSTEM, OTHER; ENGINE AND ENGINE COOLING. DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB13-097J | 2022-03-12. Service bulletin. FUEL SYSTEM, OTHER; ENGINE AND ENGINE COOLING. EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB13-027C | 2022-03-12. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.