WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Nissan Frontier

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

115 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
PC863 2022 Front2022-02-10. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE; ENGINE AND ENGINE COOLING. Engine Control Module (ECM) Reprogram Dealer Inventory *****Dealer Announcement***** Nissan is conducting a dealer inventory quality action to update the Engine Control Module (ECM) software on 4,251 specific MY2022 Nissan Frontier vehicles identified in Service Comm and National Service History – Open Campaigns. The ECM reprogram is intended to improve a possible cold startup mis-fire over thresh hold. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. *****What Dealers Should Do***** PLEASE FOLLOW THE ATTACHED INSPECTION INSTRUCTIONS: 1. Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC863 • New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to NPSB 15-460 for additional information • Please continue to check newly arriving inventory for campaign applicability. 2. Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3. Use the attached procedure to remedy any vehicles affected by this quality action prior to sale. 4. Once remedied, dealers should submit the applicable warranty claim for the action performed so it can be closed in Service Comm and release the vehicle for sale. ***** Dealer Responsibility ***** It is the dealer’s responsibility to check Service Comm or DBS National Service History – Open Campaign using the appropriate campaign ID for the inspection status on each affected vehicle currently in new vehicle inventory.
NTB22-0012022-02-10. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). DTC P0300 AND/OR P0301(2/3/4/5/6) IS STORED DURING A COLD START IF YOU CONFIRM DTC P0300 and/or any of the following DTCs are stored in the ECM; • P0301 • P0302 • P0303 • P0304 • P0305 • P0306 AND The DTC only stores during a cold start. ACTION 1. Confirm the current ECM part number. 2. Reprogram the ECM, if applicable. 3. Replace the intake manifold.
NTB19-042C2022-02-10. Service bulletin. ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE. AEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB14-012G2022-02-10. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:IGNITION:MODULE; ELECTRICAL SYSTEM. REMOTE ENGINE START NOT WORKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB99-001F2022-01-08. Service bulletin. SUSPENSION. STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB21-1182022-01-08. Service bulletin. STRUCTURE; VISIBILITY:GLASS, SIDE/REAR. RESIDUE ON OUTER SURFACE OF FRONT DOOR GLASS IF YOU CONFIRM Adhesive residue is found on the outer surface of front driver (LH) side and/or front passenger (RH) side window glass. ACTION Follow the service procedure in this bulletin to: 1. Remove the door finisher on the affected side. 2. Confirm that the Intelligent Key door request switch wiring harness is contacting the glass. 3. Reroute the harness as needed. 4. Confirm that the harness is no longer contacting the glass.
NTB21-100A2022-01-08. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. WIRELESS CHARGING REQUIRES DOORS TO BE CLOSED This bulletin has been amended. See AMENDMENT HISTORY at the bottom of page. Please discard previous versions of this bulletin.
NTB17-045C2022-01-08. Service bulletin. ELECTRICAL SYSTEM. CLEANING FRONT OR REAR COMBINATION LAMP ASSEMBLIES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
REVISION 1 PC8492022-01-08. Service bulletin. SEAT BELTS. Seat Belt Buckle Bracket Dealer Inventory UPDATE November 15, 2021 Please discard earlier versions of this bulletin. The announcement from October 8, 2021 has been revised to include the following: • Dealers may order parts, as needed, via normal ordering process beginning November 15, 2021. • Parts on order in DBS will be fulfilled.
NTB21-1062022-01-08. Service bulletin. ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE. DTC C1A17-49 OR C2580-49 STORED IN LASER/RADAR SERVICE INFORMATION If DTC C1A17-49 or C2580-49 is stored in LASER/RADAR in the “PAST” column: • Erase the DTC. • DO NOT replace any parts. If DTC C1A17-49 or C2580-49 is stored in LASER/RADAR in the "CURRENT" column, refer to the applicable ESM for instructions.
PC849 2022 Front2021-12-08. Service bulletin. SEAT BELTS. Seat Belt Buckle Bracket Dealer Inventory Dealer Announcement: Nissan is committed to a high level of customer service and satisfaction. This commitment requires Nissan to periodically place certain vehicles on temporary Quality Assurance (QA) Hold to ensure that these vehicles, as delivered to our customers, meet our exacting standards and our customers’ expectations. Effective immediately, Nissan is placing a temporary Quality Assurance (QA) Hold on 169 specific model year 2022 Frontier vehicles identified in Service Comm. Due to a manufacturing issue, certain vehicles may contain left rear seatbelt bracket bolts that were cross-threaded during installation. As a result, the left rear seatbelt bracket may become loose. What Dealers Should Do: 1.Verify if vehicles are affected by this quality hold using Service Comm or DBS National Service History – Open Campaigns I.D. PC849 •New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). •Refer to NPSB 15-460 for additional information •Some vehicles may still be in transit. Please continue to check newly arriving inventory for QA Hold applicability. 2.Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality hold. 3.No further action is necessary at this time. Nissan will provide an updated status by no later than the week of October 11, 2021.
PC849 2022 Front2021-12-08. Service bulletin. SEAT BELTS. Seat Belt Buckle Bracket Dealer Inventory Dealer Announcement: Nissan is now escalating the temporary hold on 169 specific model year 2022 Frontier vehicles identified in Service Comm to a dealer inventory quality action to inspect and, if necessary, correct the bolt hole threads and replace the bolt(s) on the left rear seatbelt bracket. Due to a manufacturing issue, certain vehicles may contain left rear seatbelt bracket bolts that were cross-threaded during installation. As a result, the left rear seatbelt bracket may become loose. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC849 •New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). •Refer to NPSB 15-460 for additional information •Some vehicles may still be in transit. Please continue to check newly arriving inventory for campaign applicability. 2.Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3.Use the attached procedure to inspect and, if necessary, remedy any vehicles affected by this quality action: •If parts are needed, dealers may place an SVC order on DBS
NTB21-1002021-12-08. Service bulletin. ELECTRICAL SYSTEM. WIRELESS CHARGING REQUIRES DOORS TO BE CLOSED SERVICE INFORMATION The wireless charging pad requires the vehicle doors to be closed before charging will start, and while charging, the function is suspended when the doors are opened. This function is controlled by the Body Control Module (BCM), and is normal.
PC843 2022 Front2021-10-16. Service bulletin. EQUIPMENT. Tow Hitch Receiver Dealer Inventory Dealer Announcement: Nissan is committed to a high level of customer service and satisfaction. This commitment requires Nissan to periodically place certain vehicles on temporary Quality Assurance (QA) Hold to ensure that these vehicles, as delivered to our customers, meet our exacting standards and our customers’ expectations. Effective immediately, Nissan is placing a temporary Quality Assurance (QA) Hold on 50 specific model year 2022 Frontier Crew Cab Long Wheelbase vehicles identified in Service Comm. Because of a supplier inventory issue, certain vehicles were manufactured and shipped without a tow hitch. Nissan is preforming a quality hold on these vehicles in order to comply with regulatory requirements. Nissan previously adjusted vehicle pricing for removal of the towing receiver hitch prior to shipment. Other MY22 Frontier units that received a credit for tow receiver hitch deletion that are not listed in Service Comm are not subject to Stop Sale and will require no additional action. What Dealers Should Do: 1.Verify if vehicles are affected by this quality hold using Service Comm or DBS National Service History – Open Campaigns I.D. PC843 •New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). •Refer to NPSB 15-460 for additional information •Some vehicles may still be in transit. Please continue to check newly arriving inventory for QA Hold applicability. 2.Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality hold. 3.No further action is necessary at this time. Nissan will provide an updated status by no later than the week of September 20, 2021.
PC843 2022 Front2021-10-16. Service bulletin. EQUIPMENT. Tow Hitch Receiver Installation Dealer Inventory Dealer Announcement: Nissan is now escalating the temporary hold to a dealer inventory quality action to install a tow hitch receiver and trailer tow harness kit on 50 specific model year 2022 Frontier Crew Cab Long Wheelbase vehicles identified in Service Comm. Because of a supplier inventory issue, certain vehicles were manufactured and shipped without a tow hitch. Nissan is preforming a quality action on these vehicles in order to comply with regulatory requirements. Nissan previously adjusted vehicle pricing for removal of the towing receiver hitch prior to shipment. Other MY22 Frontier units that received a credit for tow receiver hitch deletion that are not listed in Service Comm are not subject to Stop Sale and will require no additional action. Affected vehicles are subject to stop sale and are either currently in dealer inventory or assigned and in transit to the dealer. What Dealers Should Do: PLEASE FOLLOW THE ATTACHED INSTRUCTIONS: 1.Verify if vehicles are affected by this quality action using Service Comm or DBS National Service History – Open Campaigns I.D. PC843 •New vehicles in dealer inventory can also be identified using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). •Refer to NPSB 15-460 for additional information •Please continue to check newly arriving inventory for campaign applicability. 2.Please do not drive, loan, sell or trade the specific vehicles in dealer inventory subject to this quality action. 3.Use the attached procedure to install tow hitch receiver and tow hitch harness kit on any vehicles affected by this quality action: •Nissan has developed an automatic parts shipment to provide affected dealers with the necessary parts to complete this quality action. •Parts will begin arriving at affected dealers the first week of October 2021.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.