WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Infiniti QX60

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

119 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
ITB12-072G2022-05-20. Service bulletin. POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT; EQUIPMENT:MECHANICAL. INFINITI AWD MODELS; ABNORMAL NOISE, VIBRATION AND/OR JUDDER FROM REAR DIFFERENTIAL This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB22-0062022-03-12. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. BATTERY QUICK CHARGE NOTICE SERVICE INFORMATION When charging the vehicle’s 12 volt battery with the high amperage quick charge function, the ignition should never be ON, or turned ON, while charging. Attempting to start the vehicle, or turning the ignition ON, while using the high amperage quick charge could potentially damage the fuel pump control module. • Only turn the ignition ON when either the ESM or a technical service bulletin service procedure states to do so, and only while using a battery maintainer or smart charger set to reflash mode, or a similar setting. • Battery voltage should not exceed 16V during a reprograming operation.
ITB22-0042022-03-12. Service bulletin. ELECTRICAL SYSTEM. A/C INOPERATIVE WITH DTC B20C8-14 STORED IN THE IPDM E/R IF YOU CONFIRM The A/C compressor is not engaging when the A/C is in the ON position, as indicated by the yellow illumination on the A/C button, AND DTC B20C8-14 (COMPRESSOR [ECV]) is stored in the IPDM E/R. ACTION Follow the SERVICE PROCEDURE to reprogram the IPDM E/R.
ITB18-035B2022-03-12. Service bulletin. ELECTRICAL SYSTEM. SECURITY ALARM SOUNDS AFTER USING MECHANICAL KEY TO UNLOCK DRIVER DOOR This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB17-042E2022-03-12. Service bulletin. ENGINE AND ENGINE COOLING. DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB13-052D2022-03-12. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB13-044J2022-03-12. Service bulletin. FUEL SYSTEM, OTHER; ENGINE AND ENGINE COOLING. EVAP LEAK DTC P0442, P0455, P0456 INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB13-006C2022-03-12. Service bulletin. ELECTRICAL SYSTEM. CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB22-0032022-02-10. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM. REAR DOOR ALERT SERVICE INFORMATION SERVICE INFORMATION This bulletin contains supplementary information related to the rear door alert system on the APPLIED VEHICLES. Although the Electronic Service Manual (ESM) should be the primary source of information for inspection, diagnosis, and repair, the supplementary information in this bulletin will assist in these areas. The information in this bulletin includes: • Rear door alert description • How to turn the rear door alert system ON and OFF • Vehicle information display alert/message • Rear door alert operation NOTE: Do not replace the BCM for a rear door alert concern unless all information in this bulletin has been reviewed and the concern has been verified to be abnormal.
ITB22-0022022-02-10. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. BCM SERVICE INFORMATION SERVICE INFORMATION • When replacing the BCM, ALWAYS replace it with a new one. • Module configuration MUST BE performed before pairing the BCM and Intelligent Key unit. Once the BCM and Intelligent Key unit have been paired, portions of the configuration are locked and can no longer be changed. • When replacing the BCM, it is critical to follow the work procedure as detailed in the ESM. o Refer to the ESM: ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING BCM To prevent damage to the BCM, perform module configuration BEFORE pairing the BCM and Intelligent Key unit.
ITB22-0012022-02-10. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES:DOORS:LOCK. INTELLIGENT KEY SERVICE INFORMATION SERVICE INFORMATION • When replacing the Intelligent Key unit (hands free module), ALWAYS replace it with a new one. • Module configuration MUST BE performed before NATS initialization (key registration). Once NATS initialization has been performed, portions of the configuration are locked and can no longer be changed. • When replacing the Intelligent Key unit, it is critical to follow the work procedure in the ESM. o Refer to the ESM: BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY > DOOR & LOCK > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT To prevent damage to the Intelligent Key unit, perform module configuration BEFORE NATS initialization.
ITB21-030A2022-02-10. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES. COMBINATION METER MODULES OR ABS CONTROL UNITS CANNOT BE SWAPPED This bulletin has been amended. See AMENDMENT HISTORY below. Please discard previous versions of this bulletin.
ITB19-013C2022-02-10. Service bulletin. LANE DEPARTURE: ASSIST; LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. AEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB10-029B2022-02-09. Service bulletin. ELECTRICAL SYSTEM. CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB03-074P2022-01-08. Service bulletin. EXTERIOR LIGHTING. HEADLAMP, FOG LAMP, OR REAR COMBINATION LAMP FOGGING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB21-0302022-01-08. Service bulletin. ELECTRICAL SYSTEM. COMBINATION METERS CANNOT BE SWAPPED SERVICE INFORMATION Do not swap combination meter modules between APPLIED VEHICLES vehicles for any reason. Due to a new electrical architecture, the vehicle mileage is now stored in multiple control modules. When a mileage difference is detected between modules, the module with the lower value will be immediately overwritten, replacing it with the higher mileage. If a new combination meter module is installed, it will automatically be overwritten to the correct vehicle mileage.
ITB17-033C2022-01-08. Service bulletin. EXTERIOR LIGHTING. CLEANING FRONT OR REAR COMBINATION LAMP ASSEMBLIES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB03-051P2022-01-08. Service bulletin. EXTERIOR LIGHTING. HEADLAMP, FOG LAMP, OR REAR COMBINATION LAMP FOGGING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
ITB20-006B2021-12-08. Service bulletin. VISIBILITY:WINDSHIELD; VISIBILITY:WINDSHIELD WIPER/WASHER. WINDSHIELD WIPER BLADE PERFORMANCE/DIAGNOSIS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.