WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Infiniti QX60

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

119 on file from NHTSA, as of 2026-10-19.

About B2426 on the 2022 Infiniti QX60: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: B2426 are shown. Show all

Bulletins, newest first
ITB23-0182023-06-07. Service bulletin. STRUCTURE. AUTOMATIC BACK DOOR PARTIALLY OPENS IF YOU CONFIRM The automatic back door will only open partially and then will change to “manual mode” when using the Intelligent Key, back door request button, or the interior dash button, OR Any one or combination of the DTCs listed below are stored in AUTO BACK DOOR ECU. • U2154-87 CAN Comm Circuit • B2417-15 Touch Sensor Circuit LH Open • B2416-15 Touch Sensor Circuit RH Open • B2426-25 Spindle Sensor LH • B2427-11 Spindle Sensor RH • B2437-13 Spindle Motor RH ACTION Replace the Automatic Back Door Control Unit.
ITB22-0342022-10-07. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. POWER BACK DOOR INTERMITTENT OPERATION AND DTCS STORED IN AUTO BACK DOOR ECU SERVICE INFORMATION If you confirm the power back door does not operate or has intermittent operation, and any of the following DTCs are stored in the AUTO BACK DOOR ECU: • B2422-78 (Back Door Position Abnormal) • B2422-79 (Back Door Position Abnormal) • B2426-11 (Spindle Sensor LH) • B2426-13 (Spindle Sensor LH) • B2426-25 (Spindle Sensor LH) • B2427-11 (Spindle Sensor RH) • B2427-13 (Spindle Sensor RH) • B2427-25 (Spindle Sensor RH) • B242A-13 (Closure Motor) • B2436-11 (Spindle Motor LH) • B2436-13 (Spindle Motor LH) • B2436-19 (Spindle Motor LH) • B2437-11 (Spindle Motor RH) • B2437-13 (Spindle Motor RH) • B2437-19 (Spindle Motor RH) Refer to the information provided in this bulletin to determine if the back door stays’ (spindles’) wire harness connector (#4 and #10 in Figure 1) has a spread terminal.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.