Service bulletin ITB22-003
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10207854 |
| Published by NHTSA | 2022-02-10 |
| Manufacturer's number | ITB22-003 |
| Manufacturer's date | 2022-01-24 |
| NHTSA component | ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM |
NHTSA's summary
REAR DOOR ALERT SERVICE INFORMATION SERVICE INFORMATION This bulletin contains supplementary information related to the rear door alert system on the APPLIED VEHICLES. Although the Electronic Service Manual (ESM) should be the primary source of information for inspection, diagnosis, and repair, the supplementary information in this bulletin will assist in these areas. The information in this bulletin includes: • Rear door alert description • How to turn the rear door alert system ON and OFF • Vehicle information display alert/message • Rear door alert operation NOTE: Do not replace the BCM for a rear door alert concern unless all information in this bulletin has been reviewed and the concern has been verified to be abnormal.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Body control module
| INFINITI QX60 | 2022 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| ITB13-052D | 2022-03-12. Service bulletin. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| ITB22-002 | 2022-02-10. Service bulletin. BCM SERVICE INFORMATION SERVICE INFORMATION • When replacing the BCM, ALWAYS replace it with a new one. • Module configuration MUST BE performed before pairing the BCM and Intelligent Key unit. Once the BCM and Intelligent Key unit have been paired, portions of the configuration are locked and can no longer be changed. • When replacing the BCM, it is critical to follow the work procedure as detailed in the ESM. o Refer to the ESM: ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING BCM To prevent damage to the BCM, perform module configuration BEFORE pairing the BCM and Intelligent Key unit. |