WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Ford Transit Connect

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

109 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
25N172026-03-27. Other. LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; UNKNOWN OR OTHER. Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
TSB 22-22542022-07-01. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software.
SSM 506592022-04-13. Service bulletin. BACK OVER PREVENTION; EQUIPMENT; ELECTRICAL SYSTEM. Some 2017-2022 Transit Connect/Transit/Explorer vehicles equipped with a fleet telematics global positioning system (GPS) and a connected human machine interface (HMI) radio (CHR) may experience concerns with rear camera zoom, wrong map matching or a blank display. If these concerns are present, it's likely to be a software issue caused by the audio control module (ACM) that can be remedied by updating the ACM software to the latest level with the FDRS application. If the update does not resolve the concern, refer to the Workshop Manual. For claiming, use causal part 18C869 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 20-23012020-10-01. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE; BACK OVER PREVENTION: CAMERA SYSTEM. Some 2019 MKZ, 2019-2020 Mustang/Continental/Fusion/F-150/Transit Connect/ Ranger/Edge/Nautilus and 2020 Escape/Corsair/Aviator/Explorer/Expedition/ Navigator/F-Super Duty vehicles with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure.
SSM 485162020-03-03. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION. SSM 48516 - 2019 Transit Connect - Intermittent Inoperative Rear Back Up Camera - Vehicles Built On Or After 09 Nov 2018 through 30 Jun 2019 Some 2019 Transit Connect vehicles built between 9-Nov-2018 and 30-Jun-2019 equipped with the connected HMI Radio (CHR) may experience the parking aid camera intermittently inoperative with diagnostic trouble code (DTC) U2100 present. This may be due to an audio front control module (ACM) software concern. To correct, verify that the parking aid camera is inoperative with the engine running, reverse gear engaged and vehicle speed under 6 mph/h 10 km/h. ACM software level number is H1BT-14G298-GR/hardware part number KT1Z-18C869-J. Diagnostic trouble code (DTC) U2100 is present. If all conditions are met, Replace the CHR with part KT1Z-18C869-R or higher. Replacing the parking aid camera is not necessary. If all situations are not met, continue with normal diagnosis. Refer to Workshop Manual Section 413-13.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.