WenmarOpen by Wenmar Pro

Recalls that may apply to the 2017 Ford F-350

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

By component

United States: NHTSA, as of 2026-10-19
25V5720002025-09-03. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
22V8800002022-11-29. POWER TRAIN:DRIVELINE:DRIVESHAFT. Ford Motor Company (Ford) is recalling certain 2017-2018 F-Super Duty F-250, F-350, and F-450 4x4 vehicles. A radial damper inside the driveshaft may move out of position over time, which can cause a driveshaft imbalance and result in a fracture.
22V6440002022-08-26. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. Ford Motor Company (Ford) is recalling certain 2017-2020 F-Super Duty F-250, F-350, F-450, and 2017-2020 Lincoln Continental vehicles equipped with the 360-degree camera system. Degradation of the camera's anit-reflective lens coating can lead to a foggy or cloudy rearview camera image.
22V0870002022-02-16. STRUCTURE:FRAME AND MEMBERS:UNDERBODY SHIELDS; POWER TRAIN:DRIVELINE:DRIVESHAFT. Ford Motor Company (Ford) is recalling certain 2017-2022 F-250 and F-350 Super Duty vehicles equipped with gasoline engines and aluminum driveshafts. Underbody heat and noise insulators may loosen and contact the aluminum driveshaft, which could damage the driveshaft and cause it to fracture.
19V8800002019-12-11. SEAT BELTS:PRETENSIONER; STRUCTURE:BODY:ROOF AND PILLARS. Ford Motor Company (Ford) is recalling certain 2017-2019 F-Super Duty F-250, F-350, F-450, and F-550 SuperCrew Cab vehicles with carpet flooring. If a front seat belt pretensioner deploys as the result of a crash, the sparks may ignite materials such as carpeting or insulation within the B-pillar area. Built 2015-10-08 to 2019-10-29.
19V8640002019-12-04. LATCHES/LOCKS/LINKAGES:TAILGATE:LATCH. Ford Motor Company (Ford) is recalling certain 2017-2019 Super Duty F-250, F-350, and F-450 trucks equipped with an electric tailgate latch release switch mounted in the tailgate handle. Water may enter the electrical wiring system and cause a short circuit, activating the switch and releasing the tailgate latches. Built 2015-10-08 to 2019-11-03.
19V2780002019-04-08. ENGINE; EQUIPMENT:ELECTRICAL. Ford Motor Company (Ford) is recalling certain 2015-2019 Ford F-150 and 2017-2019 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty pick-up trucks equipped with an engine block heater and previously remedied under recall 18V894. During the previous repair, the block heater cable's splice connector may have been damaged.
17V6520002017-10-16. LATCHES/LOCKS/LINKAGES:DOORS:LATCH. Ford Motor Company (Ford) is recalling certain 2015-2017 Ford F-150, and 2017 F-250, F-350, F-450, and F-550 Super Duty trucks. The doors on these vehicles may have a bent or kinked actuation cable or the door latches may freeze after water gets into the latch. Either condition can result in the doors opening while driving although they appear to be closed. Built 2015-10-08 to 2016-09-01.
17V5990002017-09-25. SEATS; SEAT BELTS:FRONT:ANCHORAGE. Ford Motor Company (Ford) is recalling certain 2017 Ford F-150, F-250, F-350, F-450, and F-550 trucks with manually-adjusted front passenger seats. The seat belt anchor may not be adequately welded to the seat cushion frame. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages," and 207, "Seating Systems." Built 2016-11-02 to 2016-11-07.
17V5260002017-08-28. SEAT BELTS:REAR/OTHER. Ford Motor Company (Ford) is recalling certain 2015-2017 F-150, and 2017 F-250 and F-350 trucks equipped with a crew cab. The left rear inflatable seat belt buckle assembly may be inadequately attached to its mounting bracket. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages." Built 2015-10-20 to 2017-06-16.
17V3320002017-05-22. SEATS:FRONT ASSEMBLY:RECLINER; SEATS. Ford Motor Company (Ford) is recalling certain 2017 Ford Explorer, F-150, F-250, F-350, F-450 and F-550 vehicles equipped with a manual driver's seat back recliner mechanism. In the event of a crash, the seat back frame may not restrain the occupant due to having inadequate welds. As such, these vehicles may not meet the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 202a, "Head Restraints" and 207, "Seating Systems." Built 2016-12-19 to 2017-01-19.
16V9450002016-12-29. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:MOUNTING. Ford Motor Company (Ford) is recalling certain 2017 Ford F-250 and F-350 Super Duty trucks manufactured August 10, 2016, to September 17, 2016. The frame reinforcement bracket may not have been attached to the front fuel tank strap, allowing the fuel tank strap to separate from the frame. Built 2016-08-10 to 2016-09-17.
16V7780002016-10-26. FUEL SYSTEM, DIESEL. Ford Motor Company (Ford) is recalling certain model year 2017 Ford F-250 SD, F-350 SD, F-450 SD, and F-550 SD trucks manufactured March 21, 2016, to August 28, 2016. The protective shield on the fuel conditioning module may have inadequate adhesion, allowing the shield to become dislodged. Built 2016-03-21 to 2016-08-28.
Canada: Transport Canada, as of 2026-10-19
20254492025-09-03. Visual System. Issue: On certain vehicles, there could be a problem with the connections inside the rearview camera. As a result, the rearview camera image may not display correctly or at all when the transmission is shifted into reverse. Note: For certain models, this recall also affects incomplete vehicles. Safety Risk: A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the rearview camera.
20226792022-11-29. Powertrain. Issue: Over time, a damper inside the driveshaft may move and cause a vibration. If you continue driving with this vibration, the driveshaft could break and cause a loss of power to the wheels. Additionally, the truck could move when the transmission is in Park and the parking brake is not used. Note: This recall only affects certain 4x4 models with a 176" wheelbase, and a 4.1 or 4.3 rear axle ratio. Safety Risk: A loss of power to the wheels could increase the risk of a crash. A parked vehicle that rolls away could also create the risk of an injury or a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your truck to a dealership to replace the driveshaft.
20224852022-08-29. Visual System. Issue: Over time, the coating on the lens for the rearview camera could degrade. If this happens, the rearview camera image may appear foggy or cloudy. Note: This recall only affected vehicles equipped with 360-degree camera systems. Safety Risk: A rearview camera image that does not display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a dealership to replace the rearview camera.
20220742022-02-17. Powertrain. Issue: On certain trucks, the insulation under the truck may loosen and damage the driveshaft. If this happens, the driveshaft could break and cause a loss of power to the wheels. A broken driveshaft could also contact the ground and cause a loss of control. Additionally, the truck could move when the transmission is in Park and the parking brake is not used. Note: This recall only affects certain SuperCab and Crew Cab models equipped with a gas engine and an aluminum driveshaft. Safety Risk: A loss of power to the wheels or a loss of control could increase the risk of a crash. A parked vehicle that rolls away could also create the risk of an injury or a crash. Corrective Actions: Ford will notify owners by mail and instruct you to take your truck to a dealer to add new attachments for the underbody insulators. The dealer will also inspect the driveshaft for damage and repair it, as necessary.
20196232019-12-11. Seats And Restraints. Issue: On certain Super Duty models equipped with a SuperCrew cab, after a crash where a front seat belt pretensioner deploys, the carpet and/or carpet insulation could catch fire. Safety Risk: A fire that occurs after a crash could create an increased risk of injury. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer for repair. The dealer will apply foil tape to the carpet and carpet insulation, and modify the sound deadener on the back side of both driver and passenger side B-pillar trim panels as needed.
20196092019-12-05. Electrical. Issue: On certain Super Duty trucks, the electric tailgate latch could malfunction. This may cause the tailgate to unlatch on its own. If the tailgate opens while driving, cargo that is not secured could fall out of the truck bed and onto the road. Safety Risk: Cargo that falls from the truck bed could create a road hazard for others. Corrective Actions: Ford will notify owners by mail and instruct you to take your vehicle to a Ford or Lincoln dealer to modify the tailgate/frame wiring harnesses and will install a new tailgate handle release switch.
20191742019-04-10. Electrical. Issue: The connectors on the engine block heater cable may have been damaged when your truck was serviced for recall campaign 2018-718 (Ford #18S45). This could cause a short-circuit, which may result in overheated or melted wiring. Safety Risk: Overheated or melted wiring could create the risk of a fire. Corrective Actions: Stop use of your engine block heater immediately. Ford will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. Ford will send you another notice when replacement parts are available, and will ask you to take your vehicle to a dealer to install them. Do not use your engine block heater until the replacement parts are installed.
20187182018-12-20. Electrical. Issue: Water and contaminants may damage and corrode the block heater cable connectors. This could cause a short-circuit, which may result in overheated or melted wiring. Safety Risk: Overheated or melted wiring could create the risk of a fire. Corrective Actions: Stop use of your engine block heater immediately. Ford will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. Ford will send you another notice when replacement parts are available, and will ask you to take your vehicle to a dealer to install them. Do not use your engine block heater until the replacement parts are installed.
20175022017-10-18. Structure. On certain vehicles, door latch shielding may not be sufficient. As a result, water could enter into the side door latch and freeze, causing the latch mechanism to bind after opening. In addition, latch actuation cables may have been bent or kinked during installation, and could result in latch binding. A frozen door latch, or bent or kinked actuation cable may result in a door that will not open or will not close. If a latch does not fully engage the door striker, there is a potential for a door to open while the vehicle is in motion, which could increase the risk of injury. Correction: Dealers will install water shields over the door latches and the door latch actuation cables will be inspected and repaired if needed.
20174652017-09-26. Seats And Restraints. Certain vehicles equipped with a front passenger side manual seat track may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 207 - Anchorage of Seats and CMVSS 210 – Seat Belt Anchorages. If the front passenger seat track does not have sufficient weld penetration between the seat belt anchor and the seat cushion frame, the front seat passenger may not be properly restrained in the event of a crash, increasing the risk of injury. Correction: Dealers will replace the manual seat track.
20174132017-08-30. Seats And Restraints. Certain vehicles equipped with rear inflatable seat belts may fail to conform to Canada Motor Vehicle Safety Standard (CMVSS) 210 – Seat Belt Assembly Anchorages. The left rear inflatable seat belt buckle may have been assembled with a rivet that was improperly staked. As a result, the left rear seat belt assembly could separate from its mounting bracket during a crash, which could increase the risk of injury and would fail to meet the anchorage strength requirements of the standard. Correction: Dealers will inspect the left rear seat belt buckle rivet, and replace the seat belt buckle assembly if necessary.
20172762017-05-23. Accessories. Certain decorative chrome door handle covers, sold as aftermarket accessories through Ford dealers, may affect compliance to Canada Motor Vehicle Safety Standard (CMVSS) 206 – Door Lock and Door Retention Components. These accessories may cause the door handles to fail to conform to the inertial load requirements of the standard. A door handle fitted with a chrome cover could unlatch due to inertial loads during a side impact crash if the door were unlocked, which would increase the risk of injury. Correction: Covers will be removed from vehicles and owners will be reimbursed for parts and labour.
20166402016-12-19. Structure. Certain vehicles may be missing a support bracket where the front fuel tank strap attaches to the frame. Through continued use, the lack of reinforcement could lead to the fuel tank strap separating from the frame. If this occurs, the fuel tank could move out of position, potentially contacting the ground and causing a fuel leak. A fuel leak, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will install reinforcement brackets as necessary.
20165262016-10-25. Fuel System. On certain vehicles equipped with a 6.7L diesel engine and a middle position fuel tank, there could be inadequate adhesion between the protective shield and the fuel conditioning module. This could allow for the the shield to be dislodged by road debris or water spray, which could force open the drain valve on the module. If the drain valve were to be forced open, this could result in substantial fuel leak. It could also allow for air ingress into the fuel system, which may cause the engine to stumble. A substantial fuel leak on a road surface could increase the risk of a crash, and a fuel leak in the presence of an ignition source could result in a fire causing injury and/or property damage. Correction: Dealers will replace the adhesive mounted protective shield on the fuel conditioning module with a bolt-on metallic protective shield.

A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.

Check one vehicle officially

Contains information licensed under the Open Government Licence – Canada.