WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

178 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
TSB 26-23042026-07-06. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This bulletin supersedes 25-2383. Reason for update: to add 2023-2026 F-150 2.7L vehicles. Some of the vehicles listed in the Model Statement may exhibit a vibration/shudder felt during light throttle tip in at highway speeds (8,9,10 gear) with no diagnostic trouble codes (DTC) present. This may be due to various software parameters in the powertrain control module (PCM).
26B102026-07-01. Other. VEHICLE SPEED CONTROL. Certain 2025-2026 Model Year F-150, 2026 Model Year Mustang, Navigator, and 2026-2027 Model Year Expedition Vehicles Accelerator Pedal Inspection and Replacement
25L052026-07-01. Other. UNKNOWN OR OTHER. Certain 2024-2025 Model Year F-150 Vehicles Equipped with 2.7L Engine Vehicle Emission Control Information (VECI) Label Update
TSB 26-22972026-06-29. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some of the vehicles listed in the model statement above equipped with SYNC4 may experience a blank center display screen or black center display after welcome animation. The rear-view camera will still function when shifting the vehicle to reverse under these conditions.
SSM 549402026-06-22. Service bulletin. UNKNOWN OR OTHER; SERVICE BRAKES. Some 2021-2026 F-150 vehicles may exhibit a U2100:00 diagnostic trouble code (DTC) for initial configuration incomplete stored in the trailer control module (TRM). This may be due to the vehicle having a Ford accessory trailer brake kit installed without being programmed following the included instructions. If the vehicle was built with minor feature code FDDAA and a trailer brake gain switch is present in the stock location in the instrument panel, a Ford Accessory trailer brake kit has been installed on the vehicle. If a Ford Accessory trailer brake kit is present, download and run the "TRM - Towbar Configuration" application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS).
TSB 26-22642026-06-15. Service bulletin. SUSPENSION. Some of the vehicles listed in the Model Statement above may exhibit a clunking noise from the rear suspension while turning at low speeds. This may be due to binding at the leaf spring clinch clips.
TSB 26-22632026-06-05. Service bulletin. POWER TRAIN. This bulletin supersedes 26-2112. Reason For Update: add 2026 model year vehicles, update LV fluid XT-10-QLVC and CXT-10-LV6 description to add "Transfer Case Fluid 4WD Only", and update Step 4 to inspect/replace 7H351 and 7B177 outside of this article. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: - No upshift past second gear - Unable to achieve third gear ratio - Illuminated MIL with DTCs P0757 and P2701 This may be due to a damaged one-way clutch (OWC).
SSM 548772026-06-03. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2024-2026 F-150 vehicles may experience a no crank/no start condition and/or display various warning indicators/messages in the instrument panel cluster (IPC), including but not limited to, "Pre-Collision Assist Not Available", "Hill Start Assist Not Available", "Pre-Collision Assist Fault", and/or "Service AdvanceTrac". The vehicle may also have multiple communication fault diagnostic trouble codes (DTC) related to the high-speed control area network 2 (HS-CAN2) and the flexible data rate control area network (FD-CAN) modules and/or the entire network may be unresponsive. This may be due to improperly seated connector and/or a pin fit condition in connector C210. <br /><br /> If the vehicle exhibits the above conditions, access and inspect connector C210 for proper attachment, pin fit, and/or damage and repair as necessary. This connector can be accessed by removing the glovebox from its hinge. Refer to Workshop Manual (WSM), Section 412-00 Climate Control System - General Information > Removal and Installation > Cabin Air Filter and perform Steps 1 and 2. If the fault persists, refer to WSM, Sec
SSM 548742026-06-03. Service bulletin. EXTERIOR LIGHTING; FUEL/PROPULSION SYSTEM. Some 2024-2026 F-150 vehicles may exhibit an incorrect fuel gauge indication when distance to empty (DTE) is below 50 miles. Workshop Manual (WSM), Sections 413-01 > Description and Operation > Instrument Panel Cluster (IPC) - System Operation and Component Description along with 413-01 > Diagnosis and Testing > Pinpoint Test D have been updated for this concern.
SSM 548242026-05-19. Service bulletin. POWER TRAIN. Some 2023-2026 F-150 Raptor R vehicles may experience an intermittent extended crank condition when starting the vehicle with no powertrain related diagnostics trouble codes (DTC) stored in the powertrain control module (PCM). This condition will not prevent the vehicle from starting. This may be due to the software in the PCM. This condition does not affect vehicle durability, and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected by the end of Q3 2026. Replacement or reprogramming of the PCM will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. <br /><br /> If a vehicle exhibits this concern, click on the "Submit Global Concern Report (GCR)" link at the upper right of the PTS Vehicle ID screen (vehicle identification number ÝVIN¨ required) and fill out the form. Do not use the "Report A Problem"
TSB 26-22382026-05-18. Service bulletin. POWER TRAIN. This article supersedes TSB 26-2130 to update labor operation to reprogram the PCM and check EVAP system from actual time to fixed time, and add extra time to reprogram coordinated modules (if required). Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450 stored in the powertrain control module (PCM). This may be due to the software in the PCM.
TSB 26-22332026-05-18. Service bulletin. ENGINE. This article supersedes TSB 26-2116 to clarify the prior approval statement. Some of the vehicles listed in the model statement above may exhibit an oil leak from the oil filter adapter to engine block mounting area. This may be due to block porosity or a block crack just below the oil filter adapter near the main bearing cap outer bolt.
TSB 26-22172026-05-14. Service bulletin. ENGINE; POWER TRAIN; EXTERIOR LIGHTING. This bulletin supersedes 24-2441. Reason for update: consolidation of prior bulletins and an update the Service Procedure to diagnose and replace the cylinder head temperature (CHT) sensor with an updated version. Some of the vehicles listed in the Model Statement above may exhibit all of the following conditions: * Illuminated power train malfunction (wrench) indicator/malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1299, P1285 and/or P2C39 stored in the powertrain control module (PCM). * "Engine Over-Temperature" and/or Service Vehicle Soon warning message(s) displayed in the instrument panel cluster (IPC) This may be due to the software in the PCM and/or the CHT sensor. Note: The vehicle's cooling fan will operate normally with no loss of engine coolant.
TSB 26-21852026-05-14. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. This bulletin supersedes 25-2621. Reason for update: add 2026 model year vehicles and Transit, update the causal part number (15604), update the Service Procedure, update the service labor operations for 2023 F-Super Duty, and add service labor operations for Transit. Some vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.
PDM-26.21.5 F-1502026-05-01. Over-the-air update. STRUCTURE:BODY; ELECTRICAL SYSTEM; VISIBILITY/WIPER. Quality improvements include: -Prevents window bounce backs after using the one touch up feature
SSM 547682026-04-28. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2025-2026 F-150 vehicles may exhibit a no audio/sound condition. This may be due to the software in the audio control module (ACM). To determine if it is a software concern, disconnect the vehicle's 12-volt battery cables for 10 minutes and reconnect. If the concern is still present, continue with normal diagnostics in Workshop Manual (WSM), Section 415-00 Information and Entertainment System > General Information > Diagnosis and Testing and repair as necessary outside of this article. If the no audio/sound concern is resolved, reprogram the ACM using the latest software level of the Ford Diagnosis and Repair System (FDRS). Should the vehicle exhibit the symptom after the software update, engineering is currently working on a further enhanced solution for this condition that is expected by September 2026. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If a customer's vehicle exhibits this concern, submit a Vehicle Concern Report. To submit a report, click on the "Submit Global Concern Report
SSM 547532026-04-21. Service bulletin. VEHICLE SPEED CONTROL. Some 2026 F-150 vehicles equipped with a 3.5L EcoBoost engine and 2025-2026 F-150 Raptor vehicles equipped with a 5.2L or 3.5L engine may exhibit a lack of power while in transport mode and up to 1 hour after exiting transport mode. This may be due to the vehicles secure power mode feature. When active, this feature reduces the vehicles acceleration and limits the top speed to as low as 40 mph (65 km/h). This feature does not set a diagnostic trouble code (DTC) or display any on-screen messaging to alert the driver. Secure power mode automatically disables after exiting transport mode, waiting 1 hour, cycling the ignition status to key OFF for at least 1 minute, and then starting the vehicle. This feature does not affect vehicle durability, and no additional diagnostics or service is required for this condition. If the vehicle exhibits secure power mode symptoms that are described above, do not attempt to diagnose or submit a warranty claim for it. If these symptoms persist after exiting transport mode, waiting at least 1 hour, cycling the ignition status to key OFF for at least 1 minute, and starting
ITRM-25.B04 F-150Lightnin2026-04-17. Over-the-air update. EXTERIOR LIGHTING; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. 26C10 Recall remedy -Addresses instances where the trailer lights and trailer brakes may not function
DDM-26.21.5 F-1502026-04-17. Over-the-air update. VISIBILITY/WIPER. Quality improvements include: -Prevents window bounce backs after using the one touch up feature
TSB 26-21162026-04-14. Service bulletin. ENGINE. This article supersedes TSB 25-2323 to update the Service procedure, Parts list, and add a clarification note about Cost Cap and Prior approval process requirement for vehicles under NVLW. Some of the vehicles listed in the model statement above may exhibit an oil leak from the oil filter adapter to engine block mounting area. This may be due to block porosity or a block crack just below the oil filter adapter near the main bearing cap outer bolt.
SSM 547332026-04-14. Service bulletin. SERVICE BRAKES. Some 2025-2026 Bronco/Expedition/Navigator/F-150/Ranger vehicles may exhibit a "Check Brake System" message in the instrument panel cluster (IPC) and/or an illuminated anti-lock brake system (ABS) indicator with diagnostic trouble code (DTC) C0563 stored in the ABS module. This may be due to air still trapped in the system after prior bleeding attempts and/or brake service mode being enabled. The applicable pinpoint test (PPT) in Workshop Manual (WSM), Section 206-09 has been updated to improve diagnostics for this concern. Make sure the latest software version of Ford Diagnosis and Repair System (FDRS) is being used when performing the brake system pressure bleeding routine.
SSM 547282026-04-14. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2025-2026 F-150 vehicles may exhibit an intermittent or constant no audio/no volume condition and/or the inability to change SiriusXM® channels using presets. This may be due to the software in the audio control module (ACM). To correct the condition, reprogram the ACM using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 18C869 and labor operations 12651D and 12651D4.
SSM 547202026-04-10. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
SSM 547192026-04-10. Service bulletin. POWER TRAIN. For 20212026 vehicles equipped with the 10R80 transmission, a new Transmission Clutch Circuit Leak Test has been introduced in the Ford Diagnosis and Repair System (FDRS). This test utilizes the pressure and vacuum transducer (PVT) when available. When referred to a specific clutch (A-F) test by a pinpoint test in Workshop Manual (WSM), Section 307-01 > Diagnosis and Testing, the Clutch Assembly tests have been updated with a hyperlink to the new Transmission Line Pressure Test - Pressure Vacuum Transducer (PVT) Is Available procedure in WSM, Section 307-01 > General Procedures. This procedure provides instructions to perform the FDRS Transmission Clutch Circuit Leak Test when applicable. The new test improves the accuracy of detecting leaks within transmission fluid circuits and replaces the previous air check method. The previous air check procedure has been shown to produce a high rate of false positives, which may lead to unnecessary repairs when no actual leak is present. Accordingly, the air check procedure is not to be used for diagnosing internal transmission hydraulic leaks or as justification
SSM 547142026-04-10. Service bulletin. POWER TRAIN. Some 2021-2026 F-150 PowerBoost vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) P2884, P2885 and/or P2886 stored in the powertrain control module (PCM). Workshop Manual (WSM), Section 307-01 > Automatic Transmission - 10 Speed Automatic Transmission - 10R80 MHT > Diagnosis and Testing > DTC Chart and Pinpoint Tests - 3.5L V6 PowerBoost (CN) > Pinpoint Test J: Engine Disconnect Clutch has been updated to address this condition.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.