WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Ford E-350

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

45 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
SSM 524762024-05-03. Service bulletin. EQUIPMENT. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
22N152024-04-02. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Customer Satisfaction Program 22N15 Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Adding Not OTA Capable Owner letters. Other documents submitted 01/02/24 & Received OTA letters submitted on 02/01/24
22N152024-01-02. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing
SAN-Vol1 I12023-08-16. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
SSM 509742022-08-02. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; EQUIPMENT; ELECTRICAL SYSTEM:SOFTWARE. Some 2020-2022 Escape/Corsair/F-53 Motorhome/F-59 Commercial Stripped Chassis, 2021-2023 F-650/F-750/E-Series, and 2021-2022 Bronco Sport vehicles may exhibit a communication fault with emissions inspection equipment. This may be due to the software in the gateway module (GWM). To correct this condition, reprogram the GWM to latest software level using the appropriate Ford diagnostic scan tool. Use causal part 14F642 and applicable labor times from Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 509772022-08-02. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); EQUIPMENT; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2022 F-Super Duty and 2021-2023 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design has changed, requiring multiple turns to seal properly. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. For further diagnostics, refer to Workshop Manual (WSM), Section 303-13 - pinpoint test HX.
SSM 493492020-12-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Some 2021 E-Series chassis vehicles may exhibit a Service Advance Trac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperable. If this concern is still present after normal diagnosis, clear the DTC with the appropriate Ford diagnostic scan tool and schedule a follow-up appointment for service in March 2021. Inform the customer that engineering is working to implement a solution for this condition and advise the customer that they can continue to drive the vehicle. This condition does not create drivability concerns and has no effect on long-term durability. Once the solution becomes available, contact the customer and confirm a service appointment. Monitor OASIS for updates.
SSM 491472020-10-06. Service bulletin. EQUIPMENT. Some 2021 E-Series/F-650/F-750 vehicles may exhibit inoperative RKE key fobs resulting in key fob replacement or some customers may seek service to program additional key fobs to the vehicle. A new IDS procedure has been released with IDS version 119.01 to allow for RKE key fob programming. Start a vehicle session and click on the Toolbox Tab. Click on Body > Security > Remote Keyless Entry to begin programming new and/or additional key fobs. Only 4 RKE key fobs total can be programmed to each vehicle. All vehicles are equipped with a wired in connectivity device. If the customer elects to program this connectivity device it will take up 1 of the 4 available slots. The Workshop Manual procedure for RKE programming is also being updated.
SSM 489762020-08-04. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some 2021 E-Series/F-650/F-750 vehicles may exhibit inoperative RKE key fobs or some customers may seek service to program additional key fobs to the vehicle. Inform customers that Ford is developing an IDS procedure that is expected late August 2020, which will restore RKE function and allow for programming additional RKE key fobs. The Workshop Manual procedure for RKE programming is also being updated. Because these vehicles have a new generation body control module (BCM), replacement of the BCM is no longer the recommended repair procedure. Advise the customer they can continue to drive the vehicle and schedule a follow-up appointment for service in late August. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.