WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

279 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
SSM 515362023-05-04. Service bulletin. STRUCTURE. For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
SSM 515382023-05-04. Service bulletin. STRUCTURE:BODY:HOOD. Some 2022-2023 Bronco vehicles built on or after 01-Sep-2022 may exhibit an intermittent illuminated hood ajar indicator on the instrument panel cluster and/or a false alarm activation caused by a hood ajar event. This may be due to an internal failure of the hood latch. For vehicles that meet this criteria, replace the hood latch (service base part number 16700) to repair the vehicle. For claiming use the causal part number 16700 and applicable labor operations in Section 12 of the Service Labor Time Standards (SLTS).
TSB 23-21172023-05-04. Service bulletin. STRUCTURE; VISIBILITY:REAR WINDOW WIPER/WASHER. Some 2021-2022 Bronco vehicles may exhibit paint damage on the rear quarter panel due to contact with the rear window assembly (D-pillar). This may be due to an oversized washer being used during production. To correct the condition, repair the paint damage to the rear quarter panel and replace the rear window assembly.
TSB 23-20912023-04-04. Service bulletin. EQUIPMENT; STRUCTURE:BODY:ROOF AND PILLARS; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Some 2021-2022 Bronco vehicles equipped with a soft top roof may exhibit loose exterior fabric on the rear window assembly. This may be due to broken D-pillar clips on the rear window. To correct the condition, follow the Service Procedure to replace the D-pillar clips with rivets and washers.
SSM 513762023-03-04. Service bulletin. EQUIPMENT; STRUCTURE:BODY:DOOR. Some 2021-2023 Bronco vehicles may exhibit a creak/pop type noise when any of the side doors are opened and closed. This may be due to incorrect door installation, alignment and/or incorrect tightening of the two bolts which hold the door to the vehicle body. To correct this condition, inspect for and address any damage to the door and/or latch components, then remove and reinstall the suspect door following the instructions located in the Digital Owners Manual, Removable Vehicle Components > Removable Doors > Removing and Installing the Doors. In this section you ll also find a detailed tutorial video of the process. If the noise persists, perform the Front/Rear Door Alignment procedure located in the Workshop Manual (WSM), Section 501-03 Body Closures.
TSB 23-20242023-01-31. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE:BODY:ROOF AND PILLARS. Some 2021-2023 Bronco vehicles equipped with a factory soft top roof may exhibit a headliner that is detaching from the soft top material. This may be due to the factory installation process. To correct this condition, follow the Service Procedure to reattach the headliner or replace
TSB 23-20132023-01-31. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS; VISIBILITY:SUN/MOON ROOF ASSEMBLY. Some 2021-2023 Bronco vehicles equipped with a factory soft top roof may experience snow or sand accumulation on the vehicles interior during a strong storm with high winds. To correct this condition, follow the Service Procedure to retrofit the soft top assembly.
TSB 22-24362022-12-02. Service bulletin. UNKNOWN OR OTHER; STRUCTURE:BODY:ROOF AND PILLARS. This article supersedes TSB 22-2073 to update the Service Procedure. Some 2021-2022 Bronco vehicles equipped with a hard top may exhibit a loose and/or sagging headliner. This may be due to the factory installation process. To correct the condition, follow the Service Procedure to re-adhere the headliner.
TSB 22-24032022-11-01. Service bulletin. STRUCTURE:BODY. Some 2021-2022 Bronco vehicles may exhibit water leaks located at the A-pillars, overhead console/upfitter switches and/or sun visors. To correct the condition, follow the Service Procedure to diagnose and repair the water leak.
SSM 511642022-10-31. Service bulletin. STRUCTURE. Some 2021-2022 Bronco vehicles equipped with a soft top roof may experience a broken window buckle on the rear quarter or rear window assemblies. It is no longer required to replace the window assembly to repair this condition. Order the following buckle parts as needed: male side of the buckle (M2DZ-00817-C), which is located on the soft top window assemblies and the female side of the buckle (M2DZ-00817-A), which is located on the soft top cover. To install the male buckle, cut and remove the old plastic clip leaving the fabric loop (on the window assembly) fully intact. The service replacement male buckle includes an open slot that is used to slide the fabric loop through for installation. Sewing is not required for installation.
SSM 511182022-10-11. Service bulletin. STRUCTURE:BODY. Some 2022 Bronco vehicles built on 01-Feb-2022 and through 10-Mar-2022 may exhibit rusted fasteners on the front fender trail sights (base part number 9920038). This may be due to a lack of protective e-coating applied to the bolts during the manufacturing process. Replacement of the exterior bodyside grab handle assembly will no longer be required. Trail sight fasteners are now available on their own as SPN: M2DZ-18D654-A. This kit comes with two bolts and two nuts, enough to replace all fasteners on one trail sight assembly. These fasteners work on both the left and right trail sights.
TSB 22-23062022-08-23. Service bulletin. STRUCTURE. Some 2022 Bronco vehicles may exhibit a whistle noise below the lower left windshield area at the bottom of the A-pillar. This may be due to a missed body sealer application at the factory. To correct this condition, follow the Service Procedure to reseal the affected body seam.
TSB 22-22962022-07-28. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. Some 2021-2022 Bronco vehicles equipped with a factory soft top roof may experience excessive wind noise while driving, loose soft top cover, and/or difficulty latching. This may be due incorrect soft top assembly installation, latch striker positioning and/or a failed soft top component. To correct the conditions, follow the Service Procedure to inspect the vehicle and adjust the soft top components as necessary.
TSB 22-22882022-07-28. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. Some 2021-2022 Bronco vehicles equipped with a hard top roof may exhibit symptoms from the front roof panels that sit at an uneven height which may result in a poor appearance, excessive wind noise, water leaks and/or difficulty latching. This may be due to incorrect vertical adjustment of the front roof panel latch strikers. To correct this condition, follow the Service Procedure to adjust the front panel latch strikers.
SSM 507692022-05-16. Service bulletin. STRUCTURE. The 2021-2022 Bronco Workshop Manual, Section 501-18B Hard Top, has been updated. Updates include hard top rear cap flushness and parallelism specifications and an enhanced diagnostics and testing section to assist with resolving concerns of hard top roof alignment, looseness, water leaks, and noise vibration and harshness (NVH). Submit photos of hard top roof concerns that require part replacement for any reason using web-based PTS or Mobile PTS Report a Vehicle Concern function. This applies to Broncos built on/after 12-Aug-2021 equipped with hard top roof or vehicles repaired under Customer Satisfaction Program 21B49. For claiming, use labor operation SUBPHOTO for reimbursement. The hard top roof is enhanced to meet standards expected by customers. To assist with long-term supplier quality, Ford is seeking immediate dealer feedback on customer concerns.
TSB 22-21462022-05-12. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. Some 2021-2022 Bronco vehicles equipped with a soft top roof may experience paint scratches on the sports tube paint due to contact with the soft top roof frame during the open and close operation. This may be due to a lack of protective measures installed on the soft top roof frame. To correct this condition, follow the Service Procedure to install protective plates and hook and loop fasteners to sections of the soft top roof frame.
TSB 22-21422022-04-26. Service bulletin. EQUIPMENT; STRUCTURE:BODY:ROOF AND PILLARS. Some 2021-2022 Bronco vehicles may exhibit a squeak and/or rattle that originates from the roof while driving over rough surfaces. This may be due to poor roof installation, noisy roof seals or roof latches/locator pins wearing prematurely. Follow the service procedure to correct the source of the noise.
SSM 506602022-04-13. Service bulletin. STRUCTURE. Some 2022 Bronco vehicles built on 01-Feb-2022 and through 10-Mar-2022 may exhibit rusted fasteners on the exterior bodyside grab handle/fender anchor point (base part number 9920038). This may be due to a lack of protective e-coating applied to the bolts during the manufacturing process. Replacement of the exterior bodyside grab handle will be required. Due to the sudden high demand for these grab handles, service stock has been depleted. Ford is actively working to obtain more exterior bodyside grab handles/fender anchor points to meet the increase in demand and, in parallel, release the affected fasteners as a serviceable end-item. Monitor OASIS for updates.
TSB 22-20972022-03-22. Service bulletin. STRUCTURE:BODY; EQUIPMENT. Some 2021-2022 Bronco vehicles equipped with 5 doors and a hard top roof may experience a squeak and/or chirp noise from the rear of the vehicle while driving over bumps with the roof installed. This may be due to an insufficient gap between the hard top and the body rear quarter panel. To correct the condition, follow the Service Procedure to adjust this gap to the correct specifications.
TSB 22-20742022-03-08. Service bulletin. STRUCTURE:FRAME AND MEMBERS; VISIBILITY:WINDSHIELD. Some 2021-2022 Bronco vehicles may experience a water leak that originates from the left and/or right A-pillars and/or the windshield header. This may be due to excessive gaps in the body seams from the factory. To correct the condition, follow the Service Procedure to reseal the affected body gaps and replace the front header seal.
TSB 22-20702022-03-08. Service bulletin. STRUCTURE. Some 2021-2022 Bronco vehicles may exhibit a squeak and/or rattle that originates from the roof while driving over rough surfaces. This may be due to poor roof installation, noisy roof seals or roof latches/locator pins wearing prematurely. Follow the service procedure to correct the source of the noise.
TSB 22-20552022-03-01. Service bulletin. EQUIPMENT; STRUCTURE. Some 2021-2022 Bronco vehicles equipped with a soft top roof may exhibit loose exterior fabric on the rear window assembly. This may be due to broken D-pillar clips on the rear window. To correct the condition, follow the Service Procedure to replace the D-pillar clips with rivets.
SSM 504902022-02-23. Service bulletin. STRUCTURE; EQUIPMENT. 2021-2022 Bronco vehicles built on/after 12-Aug-2021 equipped with hard top roof or vehicles repaired under Customer Satisfaction Program 21B49. Submit photos of hard top roof concerns that require part replacement for any reason using web-based PTS or Mobile PTS Report a Vehicle Concern function. For payment, use labor operation SUBPHOTO for reimbursement. The hard top roof is enhanced to meet standards expected by customers. To ensure long-term supplier quality is maintained, Ford is seeking immediate dealer feedback on customer concerns.
SSM 504772022-02-16. Service bulletin. STRUCTURE; EQUIPMENT. Some 2021-2022 Bronco vehicles may exhibit a side door window that gets hung up on the upper door weatherstrip when opening the door causing resistance to opening. This may be due to an incorrect alignment of the side door and/or window. To correct this condition, ensure no damage exists to the door, latch or related components and make necessary repairs before continuing. If concern persists, perform the Up/Down, Fore/Aft Adjustment (steps 1-15), refer to Workshop Manual (WSM), Section 501-11, Front/Rear Door Window Glass Adjustment Procedure. If the concern has not been resolved, perform Pinpoint Test K located in Section 501-11 of the WSM.
TSB 22-20362022-02-16. Service bulletin. STRUCTURE. Some 2021-2022 Bronco vehicles equipped with rubberized flooring may encounter a white chalky/dull appearance due to excessive wax raising from the surface. To correct this condition, follow the Service Procedure to clean the rubberized floor.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.