WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Mazda Mazda3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

827 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
SA-017-19b2019-08-01. Service bulletin. STRUCTURE:BODY:TRUNK LID; EQUIPMENT. The 2019 Mexico built Mazda3 trunk has been disabled (interior and exterior switches do not work) during shipment from Mexico to help prevent theft of the key/fob and other accessories as center caps, SD cards etc... hidden in the trunk. This Service Alert describes the steps to retrieve that key/fob (if the key/fob in the main cabin is missing) and the steps for processing warranty depending on missing items or a missing bag.
SA-017-192019-04-25. Service bulletin. STRUCTURE:BODY:TRUNK LID; EQUIPMENT. The 2019 Mexico built Mazda3 trunk has been disabled (interior and exterior switches do not work) during shipment from Mexico to help prevent theft of the key/fob hidden in the trunk. This Service Alert describes the steps to retrieve that key/fob (if the key/fob in the main cabin is missing).
MT-012-182019-03-04. Service bulletin. STRUCTURE:BODY; STEERING. If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or equivalent balance machine, sublet the vehicle out for repair. To find the location of a GSP9700 near your dealer, visit Hunter?s web site at www.gsp9700.com and click on ?Locate a GSP9700 Road Force Balancer.?
09-008-19-35652019-02-19. Service bulletin. STRUCTURE. Some vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in cold weather areas just after the RAPGARD is removed at PDI. This may be caused by moisture which has been trapped and condensed between the paint and the RAPGARD. These types of stains can be removed with a heat gun or an infrared drier. If you encounter this concern during PDI, use a heat gun or an infrared drier to apply heat to the affected area to remove the stain(s).
09-021-18-3459a2018-11-13. Service bulletin. EQUIPMENT; STRUCTURE. Some vehicles may experience stains appearing on the hood, roof and/or trunk of the vehicle. This concern is most likely to be found in a cold weather areas just after the RAPGARD is removed at PDI. This may becaused by moisture which has been trapped and condensed between the paint and the RAPGARD. These types of stains can be removed with a heat gun or an infrared drier. If you encounter this concern during PDI, use a heat gun or an infrared drier to apply heat to the affected area to remove the stain(s).
09-014-18-3443a2018-11-13. Service bulletin. EQUIPMENT; STRUCTURE. When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.