Service bulletins for the 2016 Mazda Mazda2
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
187 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Steering are shown. Show all
| 04-006-20-3707 | 2020-06-02. Service bulletin. SERVICE BRAKES, HYDRAULIC; STEERING. Some customers may experience a TCS/DSC warning light and SCBS warning light (amber) illumination with DTC C0051:62 stored in PCM memory. DTC C0051:62 - EPS control module[when the vehicle is driven in a straight line, the difference between the steering angle (calculated by each sensor) and the steering angle (from the steering angle sensor) is greater than the specification]. This concern most likely occurs during the following situations: When the vehicle is turning in reverse, right after starting the engine. When the vehicle is going over a bump or a curb, right after starting the engine. This concern may be caused when the DSC HU/CM performs the steering center position calibration. During the learning process, if a shock is applied to the vehicle by a bump or curb etc., the steering center position may not be properly detected and creates a steering center position error. To eliminate this concern, the DSC HU/CM control software has been modified |
|---|---|
| MT-012-18 | 2019-03-04. Service bulletin. STRUCTURE:BODY; STEERING. If a vehicle has body vibration or steering wheel shimmy while driving and the root cause is determined to be tire balance, re-balance the tires using a Hunter GSP9700 or equivalent balance machine. If your dealer does not have a GSP9700 or equivalent balance machine, sublet the vehicle out for repair. To find the location of a GSP9700 near your dealer, visit Hunter?s web site at www.gsp9700.com and click on ?Locate a GSP9700 Road Force Balancer.? |
| 02-009-16-3155 | 2017-05-30. Service bulletin. STEERING: STEERING WHEEL/HANDLE BAR. SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3° EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. |
| 06-002-16-3194 | 2017-02-28. Service bulletin. STEERING. SOME VEHICLES MAY EXHIBIT AN UNUSUAL NOISE FROM AROUND THE DRIVER’S FOOT AREA WHEN REPEATEDLY TURNING THE STEERING WHEEL TO THE LEFT OR RIGHT. A VIBRATION IS FELT AT THE STEERING WHEEL WHEN THE NOISE OCCURS. THIS CONCERN MAY BE CAUSED BY A LACK OF GREASE APPLICATION TO THE SPLINES OF THE INTERMEDIATE SHAFT AT THE PRODUCTION LINE. THE GREASE APPLICATION PROCESS HAS BEEN IMPROVED. |
| 02-009-16-3155 | 2017-02-07. Service bulletin. STEERING. SOME CUSTOMERS MAY COMPLAIN THAT THE STEERING WHEEL IS OFF CENTER MORE THAN 3° EVEN WHEN DRIVING STRAIGHT ON A FLAT ROAD. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.