WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Jeep Grand Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1325 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
S25230000942025-12-17. Service bulletin. STRUCTURE:BODY. Power Liftgate Noise During Gate Operation
1085472025-12-11. Service bulletin. STRUCTURE:BODY; ENGINE. ISOLATOR - ENGINE MOUNT
1085462025-12-11. Service bulletin. STRUCTURE:BODY; ENGINE. ISOLATOR - ENGINE MOUNT
S2423000012 REV.D2025-11-26. Service bulletin. STRUCTURE:BODY. Power Liftgate Is Inoperative or Won’t Close.
S25230000892025-11-26. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Passive Entry Exterior Door Handle Inoperative When Touched For Lock And Or Unlock.
S25230000792025-10-02. Service bulletin. STRUCTURE:BODY. Rear Door Mounted Window Switch Button Is Inoperative, Stuck, Or Switch Button Does Not Return To Original Position After Pushed.
23-008-25 REV. A2025-09-24. Service bulletin. STRUCTURE:BODY. Exterior Front Lamps Condensation Clearing Procedure *Some customers may report that on occasion vehicle exterior front lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*
31-001-25 REV. A2025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-252025-08-21. Service bulletin. STRUCTURE:BODY. Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
S2223000074 REV.B2025-08-13. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. Power Side Steps Reverse, Stop In Motion, Do Not Deploy Or Stow, And May Have a Chirp Noise.
08-220-252025-07-31. Service bulletin. STRUCTURE:BODY. Rear Taillamp Condensation Clearing Procedure On occasion, vehicle exterior taillamp assemblies are fogged with a light layer of condensation on the inside of the lenses Fig. 1. This may be reported after the lamps have been turned on and brought up to operating temperature, turned off and then rapidly cooled by cold water (such as rain, or the water from a vehicle wash). Lens fogging can also occur under certain atmospheric conditions after a vehicle has been parked outside overnight (i.e. a warm humid day followed by clear cool night). This will usually clear as atmospheric conditions change to allow the condensation to change back into a vapor. Turning the taillamps on will usually accelerate this process. This bulletin is to communicate the procedure for rear taillamp condensation clearing.
S2523000061 REV.A2025-07-23. Service bulletin. STRUCTURE:BODY. Blind Spot Mirror Warning Inoperative Or Intermittently Inoperative. Service Blind Spot Message In Cluster.
S25230000612025-06-26. Service bulletin. STRUCTURE:BODY. Blind Spot Mirror Warning Inoperative Or Intermittently Inoperative. Service Blind Spot Message In Cluster.
91005952025-05-29. Service bulletin. STRUCTURE:BODY. Front Door Interior Panels: Warped Interior Door Panel / Broken Panel / Door Panel Not Fully Seated Observation: Would observe that the interior door panel is not properly seated or attached. Panel(s) may appear warped or out of position in some areas. No signs of damage should be expected. How to diagnose: Visually inspect the door panel(s) for proper installation and check for the presence of broken or loose clips. Remove the panel and inspect clips and clip towers. Next step would be reinstalling the panel if visual inspection does not find any issues. Repair Procedure: Require a picture of the door panel(s) in the 'as found' condition so we can understand what warped means in the claims that are being created. After, check the door panel for proper installation and for the presence of broken or loose clips. Remove the panel, following normal servicing procedure, and inspect clips and clip towers. If any clips are broken or missing, replace prior to reinstalling original door. After confirmation that no loose/broken/damaged clips and/or clip towers, and reinstalling door panels does not correct issue, then a 'front door trim panel' kit / claim would be acceptable. In this case, Stellantis would like to request the panel back. How to validate fix: Verify that door has no loose/broken/damaged clips and/or clip towers. Replace any broken/missing clips where possible. Then validate that reinstalling the interior door panel addresses initial issue made within the claim.
91005942025-05-29. Service bulletin. STRUCTURE:BODY. Front Door Interior Panels: Warped Interior Door Panel / Broken Panel / Door Panel Not Fully Seated Observation: Would observe that the interior door panel is not properly seated or attached. Panel(s) may appear warped or out of position in some areas. No signs of damage should be expected. How to diagnose: Visually inspect the door panel(s) for proper installation and check for the presence of broken or loose clips. Remove the panel and inspect clips and clip towers. Next step would be reinstalling the panel if visual inspection does not find any issues. Repair Procedure: Require a picture of the door panel(s) in the 'as found' condition so we can understand what warped means in the claims that are being created. After, check the door panel for proper installation and for the presence of broken or loose clips. Remove the panel, following normal servicing procedure, and inspect clips and clip towers. If any clips are broken or missing, replace prior to reinstalling original door. After confirmation that no loose/broken/damaged clips and/or clip towers, and reinstalling door panels does not correct issue, then a 'front door trim panel' kit / claim would be acceptable. In this case, Stellantis would like to request the panel back. How to validate fix: Verify that door has no loose/broken/damaged clips and/or clip towers. Replace any broken/missing clips where possible. Then validate that reinstalling the interior door panel addresses initial issue made within the claim.
1046832025-05-13. Service bulletin. STRUCTURE:BODY. CARPET - REAR FLOOR
S25230000402025-05-06. Service bulletin. STRUCTURE:BODY. Center Console Armrest Lid Does Not Stay Open, Feels Loose, Does Not Latch.
S25230000362025-05-01. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Sunroof Inoperative, Not Moving To Open Or Closed Positions.
S25230000342025-04-25. Service bulletin. STRUCTURE:BODY; FORWARD COLLISION AVOIDANCE: WARNINGS. C008E-00 Setting After Windshield Replacement
S2523000010 REV.A2025-04-03. Service bulletin. STRUCTURE:BODY. Exterior Rear View Mirror Stained And Will Not Clean.
91005022025-03-07. Service bulletin. STRUCTURE:BODY. LOWER ACTIVE GRILL SHUTTER If the upper or lower AGS seems to be inop please make sure you CLEAR the DTCs BEFORE swapping the old AGS for a new one, and test if the error code returns. Very often the wiring harness presents corrosion, so make sure to check it for any damage BEFORE swapping the AGS. Corrosion in the harness disrupts communication with the AGS, which sets up the DTCs for AGS performance and lights the CEL. If the AGS is inop and it will be replaced and sent back to Stellantis also send back the wiring harness with it. Make sure to fully perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE as indicated in the service library.
S25230000162025-03-05. Service bulletin. STRUCTURE:BODY. Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
S25130000012025-03-05. Service bulletin. STRUCTURE:BODY. Grille molding applique is sticking out at the headlamp
S2423000034 REV.A2025-03-05. Service bulletin. STRUCTURE:BODY. Defroster Grille Has Gaps And Or Is Not Sitting Flush.
1029392025-03-04. Service bulletin. STRUCTURE:BODY. LATCH – FRONT & REAR DOOR

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.