WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Ford Transit

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

192 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
SSM 475982018-11-19. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Some 2018-2019 Transit vehicles equipped with a 3.2L engine may exhibit an illuminated MIL with DTC P054E. If DTC P054E is set with any other DTCs, diagnose and repair those DTCs first. If DTC P054E is the only DTC, do not attempt to repair or replace any components, Engineering is investigating. To assist with the investigation use the Report a Vehicle Concern link at the bottom of the OASIS report and fill out the form. Monitor OASIS for updates.
SSM 474232018-09-10. Service bulletin. EQUIPMENT; FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM; FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM. Replacement engines may have a fuel injection pump sprocket that does not include a keyway slot. It is acceptable to utilize the original fuel injection pump if it has a keyway slot. Timing the injection pump is not necessary. Refer to Workshop Manual (WSM), Section 303-04C removal and installation fuel injection pump and disregard align the sprocket key wording.
SSM 474012018-09-10. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2015-2018 Transit vehicles equipped with the Auxiliary Heater / A/C Prep Package 62C are built specifically for A/C system modification. This can be identified on the Professional Technician Society (PTS) website by using vehicle identification number (VIN) > OASIS tab > Vehicle Information > Additional information will be shown as: GZBAC - heater/A/C prep pack. The upfitter who adds their rear A/C components is responsible for filling their system and specifying the new refrigerant charge level. Do not submit warranty claims for insufficient refrigerant charge unless a defective Ford part or component is identified as the causal part. Consult the upfitter who performed the modification if refrigerant charge level is in question or a defect is present within the add-on system.
tsb18-21892018-09-10. Service bulletin. FUEL SYSTEM, DIESEL; EQUIPMENT; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE). Some 2015-2018 Transit vehicles equipped with a 3.2L diesel engine may exhibit "Drive To Clean" maintenance messages and/or an illuminated malfunction indicator lamp (MIL) on with DTC P2459, P2463, and/or P246C. Vehicles may also exhibit frequent automatic exhaust regeneration attempts. This may be due to vehicles being used in a stationary or off-highway, low speed applications. If automatic regeneration attempts are unsuccessful, these symptoms may be a result of soot accumulation in the diesel particulate filter (DPF). These vehicles may benefit from operator commanded regeneration (OCR) capability so complete regeneration cycles may be performed in a stationary setting. Follow the Service Procedure steps to correct the condition.
tsb18-21792018-09-10. Service bulletin. SEATS:MID/REAR ASSEMBLY; EQUIPMENT. This article supersedes TSB 18-2084 to update the Service Procedure. Some 2013-2018 Transit Connect vehicles built on 1-Jan-2013 and through 5-Jan-2018 may exhibit a condition where either section of the second row seat is stuck or difficult to fold or unfold. This may be due to a misrouted cable or a cable that is in need of adjustment. It may be necessary to reduce the cable end fitting length. It is not necessary to install a new second row seat. Follow the Service Procedure steps to correct the condition.
SSM 473942018-07-23. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Some 2013-2018 F-150, 2015-2018 Transit/Expedition, and 2015-2017 Navigator vehicles equipped with a 3.5L EcoBoost engine with greater than 20,000 miles may exhibit a tick type noise from the cylinder block area. This noise may be caused by a cracked piston skirt. The noise can be isolated to a cylinder using a stethoscope or other suitable listening device. Canceling the affected cylinder will reduce or eliminate the noise. If the noise is isolated to a specific cylinder, it is recommended to replace the short block. If the noise cannot be isolated using the methods described, refer to the Workshop Manual (WSM) for diagnosis. A cracked piston skirt does not result in metal contamination of the engine or any related cylinder head damage. Prior approval for short block replacement is not required under new vehicle limited warranty coverage.
SSM 473802018-07-23. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some 2016-2018 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
SSM 473792018-07-23. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Various 2016-2018 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
SSM 473762018-07-23. Service bulletin. ENGINE; EQUIPMENT. Some 2013-2018 F-150, 2015-2018 Transit/Expedition, and 2015-2017 Navigator vehicles equipped with a 3.5L EcoBoost engine with greater than 20,000 miles may exhibit a tick type noise from the cylinder block area. This noise may be caused by a cracked piston skirt. The noise can be isolated to a cylinder using a stethoscope or other suitable listening device. Canceling the affected cylinder will reduce or eliminate the noise. If the noise is isolated to a specific cylinder, it is recommended to replace the short block. If the noise cannot be isolated using the methods described, refer to the Workshop Manual (WSM) for diagnosis. A cracked piston skirt does not result in metal contamination of the engine or any related cylinder head damage. Short block replacement does not require prior approval.
SSM 473402018-07-23. Service bulletin. EQUIPMENT; STRUCTURE. 2017-2018 F-Super Duty/F-650/F-750/E-Series/Transit chassis cab and stripped chassis vehicles have their front alignment set as part of final assembly. The addition of aftermarket equipment such as utility and box bodies will change the ride height and therefore the alignment angles. Front-end alignments performed before the addition of aftermarket equipment may not be accurate. It is the responsibility of the final-stage manufacturer to check and set alignment angles and set clear vision (steering wheel orientation) after the addition of the aftermarket equipment. Reference page nine of the Body Builders Layout book for more information about this and the addition of aftermarket bodies to incomplete vehicles.
TSB18-21722018-07-23. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Some 2015-2018 Transit vehicles equipped with a 3.5L or 3.7L engine may exhibit a lack of heat or uneven heat from side to side. This condition may be due to deposits from the engine coolant trapped in the heater core. Follow the Service Procedure steps to correct the condition.
SSM 470122018-06-11. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2015-2018 F-150, Mustang and Transit vehicles built on or before 01-Dec-2017 may have a concern of no airflow from the climate control vents. This may be caused by a seized or sticking A/C clutch. This can be repaired by replacing only the A/C clutch (19D786/19D784). The compressor assembly (19703) may not be required. Refer to Workshop Manual, Section 412-00 for A/C clutch removal. It may be necessary to lightly tap around the stuck area of the clutch with a rubber mallet to free it from the pulley for removal. Refer to applicable labor operations from Section 11 of the SLTS maunual when replacing the A/C clutch.
SSM 470092018-06-11. Service bulletin. EQUIPMENT:ELECTRICAL; EQUIPMENT. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 470032018-06-11. Service bulletin. EQUIPMENT. 2015-2018 Transit vehicles ordered with a keyless entry keypad arrive with the Ford Accessory keypad installed and programmed. Vehicles built prior to late January 2017 will have a cardboard box containing a master keycode card and personal entry code programming instructions stowed in the vehicles driver door pocket. Vehicles built after late January 2017 will have the cardboard box containing the card and instructions already stowed in the glove box. The master keycode card and programming instructions must be placed along with the other owner literature in the glovebox, for future reference by the vehicle owner. Certain U.S. dealer employees can retrieve lost keypad codes via FMCDealer.com - Parts and Service tab - Parts Product Line Information - Accessories - Keys/Entry Devices.
SSM 470122018-05-29. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2015-2018 F-150, Mustang and Transit vehicles built on or before 01-Dec-2017 may have a concern of no airflow from the climate control vents. This may be caused by a seized or sticking A/C clutch. This can be repaired by replacing only the A/C clutch (19D786/19D784). The compressor assembly (19703) may not be required. Refer to Workshop Manual, Section 412-00 for A/C clutch removal. It may be necessary to lightly tap around the stuck area of the clutch with a rubber mallet to free it from the pulley for removal. Refer to applicable labor operations from Section 11 of the SLTS maunual when replacing the A/C clutch.
SSM 470092018-05-29. Service bulletin. EQUIPMENT:ELECTRICAL. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 470032018-05-29. Service bulletin. EQUIPMENT:ELECTRICAL. 2015-2018 Transit vehicles ordered with a keyless entry keypad arrive with the Ford Accessory keypad installed and programmed. Vehicles built prior to late January 2017 will have a cardboard box containing a master keycode card and personal entry code programming instructions stowed in the vehicles driver door pocket. Vehicles built after late January 2017 will have the cardboard box containing the card and instructions already stowed in the glove box. The master keycode card and programming instructions must be placed along with the other owner literature in the glovebox, for future reference by the vehicle owner. Certain U.S. dealer employees can retrieve lost keypad codes via FMCDealer.com - Parts and Service tab - Parts Product Line Information - Accessories - Keys/Entry Devices.
SSM 472012018-05-21. Service bulletin. EQUIPMENT. Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
SSM 471872018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES; ENGINE AND ENGINE COOLING. Some 2017-2018 Escape/Focus/Transit Connect vehicles equipped with remote start may exhibit the engine shut off after using the remote start function to start the vehicle with DTC P1594 stored in the BCM. If using the FordPass app, the app will tell the customer that the vehicle started successfully, but the customer observes that the vehicle did not start or started then shut off. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
SSM 471712018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. Some 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 and connected to an iPhone recently upgraded to iOS 11.2.5 may exhibit functional concerns where USB audio playback and App Link will not operate. This may also include, under certain conditions, no Bluetooth streaming. Apple has released iOS 11.2.6 to address this concern. Advise the customer to update the device to iOS 11.2.6 and re-evaluate before performing any diagnosis or repairs for this condition. To check the iOS software level on an Apple iOS device, select Settings > General > About on the device.
SSM 471272018-05-21. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES. The procedure to program keys on 2015-2018 Transit vehicles depends on if the vehicle is equipped with the Passive Anti-Theft System (PATS). Keys for PATS and non-PATS vehicles look the same, there is no visual difference. Vehicles with PATS have a plastic ring around the ignition lock cylinder and transponder. On the OASIS page, PATS vehicles can be identified by clicking on the Additional Information link and using the search function (Ctrl + F) to find IMMOBILIZER. Vehicles with LESS ENG IMMOBILIZER THEFT SYS do not have PATS. Refer to Work Shop Manual (WSM), Section 501-14 for programming keys on non PATS vehicles and Section 419-01B for programming keys on PATS vehicles. When performing the PATS key procedure, both PATS and Remote Keyless Entry codes are programmed simultaneously.
SSM 471002018-05-14. Service bulletin. EQUIPMENT:ELECTRICAL. Some 2016-2018 Ford and Lincoln Vehicle equipped with SYNC 3 and connected to an iPhone recently upgraded to iOS 11.2.5 may exhibit a concern where USB Audio playback and App Link applications will not function properly. This may also include, under certain conditions, no Bluetooth Streaming. Apple is aware of the issue and is working on a resolution with a future iOS release. No repairs should be performed at this time. To check the iOS software level on an Apple iOS device, select Settings > General > About on the device. Monitor OASIS for updates. Customers can also check Apple Support or connect to iTunes for the latest available iOS release for their phone.
SSM 470802018-05-14. Service bulletin. EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. 2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
SSM 469302018-01-29. Service bulletin. EQUIPMENT:ELECTRICAL. Some 2016-2018 Ford or Lincoln vehicles equipped with SYNC 3 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is due to the power saving features enabled while in transport mode and is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure allowing time for the SYNC system to complete all tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
SSM 469032018-01-29. Service bulletin. POWER TRAIN; EQUIPMENT; ENGINE. When replacing a 2015-2018 Transit 3.2L Duratorq-TDCi engine assembly or block, two new transmission locator dowel pins (W703519 or W718670) must be installed. This information is available in Workshop Manual, Section 303-01C. The parts catalog also specifies to order the dowels when ordering an engine. Failure to install dowels pins will prevent proper engine to transmission alignment resulting in a cracked flexplate and/or crankshaft position sensor damage. Per Warranty and Policy, damage resulting from an incomplete or improper repair is not warrantable.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.