WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Maverick

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

166 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Glass, wipers and mirrors are shown. Show all

Bulletins, newest first
TSB 26-23432026-08-03. Service bulletin. VISIBILITY/WIPER; STRUCTURE:BODY; UNKNOWN OR OTHER. This bulletin supersedes TSB 24-2317. Reason for the update: update the Parts list to clarify the claim quantity of the part number RZ6Z-7840380-A Some of the vehicles listed in the Model statement above may exhibit a rattle noise from the instrument panel near the base of the windshield while driving over rough or uneven roads. This may be due to excessive movement of the instrument panel.
SSM 541372025-08-19. Service bulletin. UNKNOWN OR OTHER; VISIBILITY/WIPER. Various 2021-2025 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit "Please Check Surroundings For Safety" or "Full View Not Available" messages when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition.
SSM 502002021-10-29. Service bulletin. VISIBILITY; VISIBILITY/WIPER; VISIBILITY:REAR WINDOW WIPER/WASHER:MOTOR. On 2021 Bronco Sport and 2022 Maverick vehicles, when replacing wiper blades or wiper arms, damage to the wiper motors may occur if the following steps are not followed prior to using the Workshop Manual (WSM) procedure in Section 501-16. To remove the wiper blades: 1. Place ignition key in accessory position (vehicles with keys) or key inside the vehicle (vehicles with intelligent access), press the Start-Stop button without applying the brake pedal. 2. Activate the wipers using the stalk switch. Do not manually rotate the wiper arms and blades. Damage to the wiper motor may occur. 3. When the wipers are at mid travel, move the key to the off position (units with keys) or press the Start-Stop button again to leave the wipers in a service position. Service the wiper blades once the wiper arms are at the mid travel position using the procedure in the Owner's Manual.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.