WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Maverick

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

166 on file from NHTSA, as of 2026-10-19.

About P0036 on the 2022 Ford Maverick: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: P0036 are shown. Show all

Bulletins, newest first
SSM 509932022-08-15. Service bulletin. ELECTRICAL SYSTEM. Some 2022 Maverick vehicles built on or before 4-Apr-2022 equipped with 2.0L engine may exhibit a charging system warning indicator with diagnostic trouble codes (DTCs) U012D, U0284 and/or U042E stored in the powertrain control module (PCM). The vehicle may also exhibit a malfunction indicator lamp (MIL) with DTCs P0036:00 and/or P0138:00 stored in the PCM. This may be caused by water intrusion in the connector C1050. Prior to performing Workshop Manual (WSM) diagnostics, inspect the male and/or female connector C1050 for signs of corrosion or water intrusion. If water or corrosion is found, replace the male and/or female connector C1050 with a pigtail kit and apply electrical grease.
SSM 509732022-08-02. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2022 Maverick vehicles built on or before 4-Apr-2022 equipped with 2.0L engine may exhibit a charging system warning indicator with diagnostic trouble codes (DTCs) U012D, U0284 and/or U042E stored in the powertrain control module (PCM). The vehicle may also exhibit a malfunction indicator lamp (MIL) with DTCs P0036:00 and/or P0138:00 stored in the PCM. This may be caused by water intrusion in the connector C1050. Prior to performing Workshop Manual (WSM) diagnostics, inspect the male and/or female connector C1050 for signs of corrosion or water intrusion. If water or corrosion is found, replace the male and/or female connector C1050 with a pigtail kit and apply dielectric grease.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.