WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Maverick

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

166 on file from NHTSA, as of 2026-10-19.

About P237F on the 2022 Ford Maverick: what the code means, and the bulletins and recalls about the same components.

By type

By component

By trouble code

Only bulletins with trouble code: P237F are shown. Show all

Bulletins, newest first
SSM 527422024-08-06. Service bulletin. UNKNOWN OR OTHER. Some 2021-2023 F-150 hybrid vehicles equipped with a 3.5L PowerBoost engine and 2022-2023 Maverick full hybrid electric vehicles (FHEVs) may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2C22, P2C23, P237C, P237D, P237E and/or P237F in the powertrain control module (PCM). This may be due to the exhaust heat exchanger actuator.
SSM 525432024-05-23. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2024 F-150-3.5L FHEV, 2020-2024 Explorer 3.3L FHEV, 2020-2024 Escape 2.5L FHEV, and 2022-2024 Maverick 2.5L FHEV vehicles may exhibit an illuminated MIL with DTC P237F and/or P2C23 stored in the powertrain control module (PCM) and no affect on drivability. This may be due to seal damage, corrosion and/or water intrusion in the exhaust coolant temperature (ECT) sensors 3 and/or 4 connector. Visual inspection should be completed on ECT3 and ECT4 sensors and mating connections for seal damage, water intrusion, and corrosion. If seal damage, water intrusion or corrosion is present, repair per cell 5 of the Wiring Diagram, then apply Motorcraft® XG-12 Electrical Grease to the female/vehicle side of the harness. This inspection of ECT3 and ECT4 sensors should be completed prior to starting the appropriate pinpoint test in Section 303-03 of the Workshop Manual (WSM). If DTCs P237F and/or P2C23 do not return, no further action is necessary and the replacement of the entire exhaust heat exchanger assembly is not required. If P237F and/or P2C23 returns, follow the pinpoint test in Section 303-03 of the WSM for further diagnostics.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.