WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Ford F-350

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

118 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
SSM 552392026-10-13. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM; SERVICE BRAKES. Some 2023-2026 F-Super Duty vehicles equipped with a trailer brake control module and built on or before 08-May-2026 may exhibit a "Trailer Disconnected" message after cycling the ignition off and back on with a trailer connected. This may be due to the presence of an integrated battery charger on a trailer equipped with electric over hydraulic brakes. If trailer functionality is restored after unplugging and plugging the trailer connector back in while the ignition is on, this condition can be corrected by downloading and performing the "Trailer Brake Configuration" application using the latest software version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19H332 and labor operations 12651D and 12651D4. Workshop Manual (WSM), Section 417-01 Exterior Lighting > Diagnosis and Testing > Trailer Lamps > Pinpoint Test G The Message Center Displays A False Trailer Disconnected Message When A Trailer Is Connected To The Vehicle - Only For Electric Over Hydraulic (EOH) Equipped Trailers When Vehicle Trailer Brake Type Setting Is Set To Electric Over Hydraulic has bee
TCU-26.2.12.2.12026-09-21. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: -Addresses a bug that may cause updates to fail
ECG-26.2.12.3 Bronco,Esca2026-09-11. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Quality improvements include: -ePrivacy enhancements
SSM 551182026-09-01. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; STRUCTURE:BODY. Some of the following vehicles: * 2023-2025 F-Super Duty built on or before 02-Feb-2025 * 2024-2026 Ranger/Bronco/Mustang * 2024-2025 F-150 built on or before 15-Jul-2025 * 2024-2025 Nautilus built on or before 16-Feb-2025 * 2025 Explorer/Aviator built on or before 01-Feb-2025 may exhibit all of the following symptoms: - "No Key Detected" message displayed on the instrument panel cluster (IPC). - Key fob does not work in the backup slot. - Remote keyless entry (RKE) (lock and unlock from the key fob) functionality will work to lock/unlock the vehicle. If the vehicle exhibits these symptoms, start the vehicle using both key fobs. If the no crank/no start condition with "No Key Detected" concern is present, reprogram both key fobs and retest. If the no crank/no start condition with "No Key Detected" is still present, replace the body control module (BCM). Refer to Workshop Manual (WSM), Section 419-10. For claiming, use causal part 15604 and labor operation MT55118SSM up to 1.8 hours.
SSM 551162026-09-01. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some of the following vehicles: * 2025-2026 Expedition/Navigator built on or after 02-Feb-2025 * 2025-2026 F-Super Duty built on or after 02-Feb-2025 * 2025-2026 Explorer/Aviator built on or after 02-Feb-2025 * 2025-2026 Nautilus built on or after 17-Feb-2025 * 2025-2026 F-150 built on or after 16-Jul-2025 may exhibit all of the following symptoms: - "No Key Detected" message displayed on the instrument panel cluster (IPC) - Key fob does not work in the backup slot. - Remote keyless entry (RKE) (lock and unlock from the key fob) functionality will work to lock/unlock the vehicle. If the vehicle exhibits these symptoms, manually enter the vehicle identification number (VIN) into the VIN entry dialog in the Ford Diagnosis and Repair System (FDRS) and then start a session using the Vehicle Communication Module (VCM) II, VCM 3, Vehicle Communication and Measurement Module (VCMM) or later level device with a universal serial bus (USB) cable disconnected from the laptop. Download the "BCM - Body Control Module (BCM) Hardware Test" app
SSM 550312026-07-28. Service bulletin. UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM. Some 2021-2026 Ford/Lincoln vehicles may exhibit various symptoms including but not limited to the auto start/stop system not operating as intended with a "Check Charging System" message in the instrument panel cluster (IPC) while the charging system is operating properly with no charging related diagnostic trouble codes (DTC) stored. This may be due to someone using an aftermarket programmer to change the body control module (BCM) configuration to disable the auto start/stop system or perform other unsupported programming modifications. To correct this condition on F-150 and Bronco vehicles, download and run the Ford Diagnosis and Repair System (FDRS) application titled "BCM-Charging System Configuration Correction". Running this application will determine if the BCM configuration was modified by the customer and if so, provide the option to return the configuration back to factory settings. For other vehicle models exhibiting concerns related to unsupported aftermarket BCM programming, submit a Technical Support Request (TSR) requesting support to revert the BCM configuration
SSM 550212026-07-21. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2025-2026 Bronco/Bronco Sport/Corsair/F-150/F-Super Duty/Maverick/Mustang/Mustang Mach-E/Ranger vehicles may exhibit a no audio/sound condition. This may be due to the software in the audio control module (ACM). To determine if it is a software concern, disconnect the vehicle's 12-volt battery cables for 10 minutes and reconnect. If the concern is still present, continue with normal diagnostics in Workshop Manual (WSM), Section 415-00 Information and Entertainment System > General Information > Diagnosis and Testing and repair as necessary outside of this article. If the no audio/sound concern is resolved, reprogram the ACM using the latest software level of the Ford Diagnosis and Repair System (FDRS). For claiming, use causal part 18C869 and labor operations 10654C, 12651D and 12651D4.
SSM 549792026-07-08. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; VISIBILITY/WIPER. Some 2023-2025 Mustang Mach-E and 2024-2026 F-Super Duty vehicles equipped with a 360-degree camera may exhibit a distorted or corrupted 360-degree camera image in the center display screen, but the rear-view camera image is operating correctly. To restore the 360-degree camera image, download and run the "IPMA - Reset the Image Processing Module A (IPMA) Calibration Data" application using the Ford Diagnosis and Repair System (FDRS) scan tool. Then download and run the "IPMA - 360 Degree View Camera Alignment" application. Inform customers that they can continue to drive the vehicle and engineering is currently working on a software solution for this condition that is expected in Q3 of 2026. Replacement or reprogramming of the IPMA will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If a vehicle exhibits this condition, enter a vehicle identification number (VIN) and click the "Submit Global Concern Report (GCR)" link at the upper right of the PTS
SSM 549752026-07-07. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Some 2023-2026 F-Super Duty vehicles equipped with a 10R100 or 10R140 transmission may exhibit an intermittent failure to engage forward or reverse gears and/or a loud whining noise. Additionally, the driver will be able to shift back to park. This may be due to PCM software being unable to command the transmission solenoid clutch actuators when the battery has a low state of charge (SoC) and/or the vehicle has been jump started. To restore proper transmission functionality, charge the battery as stated in the Workshop Manual (WSM), Section 414-01 Charging System > General Information. Cycle the ignition on then off and leave the vehicle off for 5 minutes to confirm the condition is no longer present. To prevent this issue from reoccurring, refer to the Owner's Manual > Storing Your Vehicle > Preparing Your Vehicle for Storage > 12V Battery. Replacement of transmission components will not resolve this condition. Inform the customer that the condition has no impact on transmission durability. For claiming, use causal part 12A650 and labor operations 12650D, 12650D45, and 12650D81.
TSB 26-21852026-05-14. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. This bulletin supersedes 25-2621. Reason for update: add 2026 model year vehicles and Transit, update the causal part number (15604), update the Service Procedure, update the service labor operations for 2023 F-Super Duty, and add service labor operations for Transit. Some vehicles listed in the Model statement above may exhibit a no crank/no start condition where the customer cannot start their vehicle. The vehicle may also exhibit a "No Key Detected" message displayed on the instrument panel cluster (IPC), and no key fob works in the back up slot. The remote keyless entry (RKE) functionality will work to lock/unlock the vehicle.
SYNC-26.2.3.11.1 SuperDut2026-05-01. Over-the-air update. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Quality improvements include: -Resolves SiriusXM disk memory usage
SSM 547652026-04-28. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2025-2026 Bronco, Bronco Sport, F-Super Duty, Maverick, Mustang, Mustang Mach-E, Ranger and Transit vehicles may exhibit a no audio/sound condition. This may be due to the software in the audio control module (ACM). To determine if it is a software concern, disconnect the vehicle's 12-volt battery cables for 10 minutes and reconnect. If the concern is still present, continue with normal diagnostics in Workshop Manual (WSM), Section 415-00 Information and Entertainment System > General Information > Diagnosis and Testing and repair as necessary outside of this article. If the no audio/sound concern is resolved, engineering is currently working on a solution for this condition that is expected by September 2026. Replacement or reprogramming of the ACM and or audio digital signal processing module (DSP) may not resolve this condition at this time. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available. If a customer's vehicle exhibits this concern, submit a Vehicle Concern Report.
ITRM-25.A04 SuperDuty2026-04-17. Over-the-air update. EXTERIOR LIGHTING; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. 26C10 Recall remedy -Addresses instances where the trailer lights and trailer brakes may not function
SSM 547222026-04-10. Service bulletin. SERVICE BRAKES; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2023-2026 F-Super Duty vehicles equipped with a trailer brake control module may exhibit a "Trailer Disconnected" message after cycling the ignition off and back on with a trailer connected. This may be due to the presence of an integrated battery charger on a trailer equipped with electric over hydraulic brakes. If trailer functionality is restored after unplugging and plugging the trailer connector back in while the ignition is on, this condition can be corrected by downloading and performing the "Trailer Brake Configuration" application using the latest software version of the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 19H332 and labor operations 12651D and 12651D4. Workshop Manual (WSM), Section 417-01 Exterior Lighting > Diagnosis and Testing > Trailer Lamps > Pinpoint Test G has been updated to improve diagnostics for this condition.
SSM 547202026-04-10. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
26E012026-04-07. Other. ELECTRICAL SYSTEM; POWER TRAIN. Certain 2023 - 2026 Model Year F-250 – F600 Super Duty Vehicles with 6.7L Engines Powertrain Control Module (PCM) Software Update The affected vehicles were originally manufactured with Powertrain Control Module (PCM) software that did not provide the correct warnings when certain conditions are present in the Selective Catalyst Reduction (SCR) system as required and described in the Owner’s Manual.
DDM-26.21.5 SD2026-04-06. Over-the-air update. ELECTRICAL SYSTEM; UNKNOWN OR OTHER; STRUCTURE:BODY. "Quality improvements include: -Prevents window bounce backs after using the one touch up feature"
SSM 546412026-03-11. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2025-2026 F-Super Duty vehicles properly upfitted with a snowplow kit following the guidelines in the Super Duty Body Builders Layout Book (located on the www.FordPro.com website > Resources > Body Builder Advisory Service (BBAS) > Publications) may experience a radio volume that temporarily turns off or decreases when the engine RPMs are raised above idle and the snowplow is operated. Ford is aware of this condition and is investigating a service solution. Component replacement is not expected to resolve this condition. Monitor Professional Technician System (PTS) for updates.
26P022026-03-05. Other. ELECTRICAL SYSTEM; STRUCTURE:BODY. Certain 2025-2026 Model Year F-150 and F-250-600 vehicles Driver Door Module (DDM) & Passenger Door Module (PDM) Software Updat
SYNC-26.2.4.10 SuperDuty2026-03-03. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. "Quality improvements iclude: -Introduces the Start inhibit remote lockdown for Security package customers"
SSM 546012026-02-27. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY; UNKNOWN OR OTHER. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
ECM-25.10.21.2 SuperDuty2026-02-25. Over-the-air update. ELECTRICAL SYSTEM; ENGINE; UNKNOWN OR OTHER. Quality improvements include: -Updates the emissions control system, improving performance in order to ensure meeting regulatory requirements
SSM 545642026-02-20. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY; VISIBILITY/WIPER. Some 2021-2026 F-150 and 2024-2026 F-Super Duty vehicles equipped with one-touch up/down front windows may exhibit a window not responding to one-touch controls and/or bouncing back when using the one-touch close function.<br /> <br /> For vehicles included in Field Service Action (FSA) 25P35 and/or 26P02, perform repairs as directed by the FSA(s).<br /> <br /> For 2021-2026 vehicles not included in the FSA(s), reprogram the driver door module (DDM) and the passenger door module (PDM) using the latest software level of Ford Diagnosis and Repair System (FDRS) scan tool according to the Workshop Manual (WSM), Section 501-11 for normal diagnostics and testing direction by symptom. For claiming, use causal part 14B291 and labor operation MT14B291SSM.
SSM 545852026-02-19. Service bulletin. VISIBILITY/WIPER; STRUCTURE:BODY; ELECTRICAL SYSTEM. Some 2021-2026 F-150 and 2024-2026 F-Super Duty vehicles equipped with one-touch up/down front windows may exhibit a window not responding to one-touch controls and/or bouncing back when using the one-touch close function.<br /> <br /> For vehicles included in Field Service Action (FSA) 25P35 and/or 26P02, perform repairs as directed by the FSA(s).<br /> <br /> For 2021-2026 vehicles not included in the FSA(s), reprogram the driver door module (DDM) and the passenger door module (PDM) using the latest software level of Ford Diagnosis and Repair System (FDRS) scan tool according to the Workshop Manual (WSM), Section 501-11 for normal diagnostics and testing direction by symptom. For claiming, use causal part 14B291 and labor operation MT14B291SSM, up to 0.4 hours.
SSM 545842026-02-17. Service bulletin. ENGINE; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2023-2026 F-Super Duty vehicles that require replacement of the heating ventilation and air conditioning (HVAC) module may have previously experienced a PMI that will not complete during installation. This may be due to a concern with the PMI application within the Ford Diagnosis and Repair System (FDRS) scan tool. To correct this condition, navigate to the FDRS application HVAC Programmable Module Installation (PMI). Click on the download button (if not already downloaded) or the refresh button on the right side of the application (if the application is already downloaded). Hover your mouse over the application name and verify the application version reads G2327867-5.0 or higher. Once the application is confirmed to be updated, run the HVAC PMI application.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.