WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

594 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
SSM 539732025-07-02. Service bulletin. POWER TRAIN; ENGINE. Some 2021-2024 Edge/Nautilus, 2021-2025 Bronco/Bronco Sport/E-Series/Escape/Corsair/Expedition/Navigator/Explorer/Aviator/F-150/F-Super Duty/Mustang/Ranger, and 2022-2025 Maverick vehicles may require an A/C compressor clutch assembly replacement be performed for various concerns. Workshop Manual (WSM), Section 412-00 Removal and Installation has been updated to eliminate the need to remove and install the A/C compressor to change out the A/C Compressor clutch assembly.
TSB 25-22762025-06-24. Service bulletin. SERVICE BRAKES; POWER TRAIN. This article supersedes TSB 25-2045 to update the production fix date and add model years. Some of the vehicles listed in the Model statement above equipped with a console gear shift module (GSM) may exhibit at least one of the following conditions: * Clicking sound coming from shifter after it is placed and kept in reverse, neutral or drive position (2024 only) * Shifter will not shift out of park/into park * Shifter will not shift out of gear * Shifter will not stow/unstow * Shifter will move past the park position * Loose shifter lever arm at pivot * Illuminated powertrain malfunction (wrench) indicator * DTC P0929:77, P0929:00, P0929:07 and/or P0929:9A This may be due to a faulty GSM and/or connector C211 pin push out on circuit CCB61 or an open on circuit CCB61, between the anti-lock brake system (ABS) module and the body control module (BCM). Note: If the gear shifter lever will not shift into park, the transmission will automatically shift into park when the return to park function is triggered.
SSM 538782025-06-11. Service bulletin. POWER TRAIN. Some 2021-2025 Expedition/Navigator and 2021-2025 F-150 non-Lightning/non-PowerBoost vehicles may exhibit a rattle/scraping noise from the bellhousing area on start-up. This may be due to the torque converter studs contacting the engine to transmission spacer plate (separator plate). To correct this condition, inspect the engine to transmission spacer plate and torque converter studs for wear/damage. If wear/damage is found, replacement of the torque converter is not necessary. Replace only the engine to transmission spacer plate. Refer to Workshop Manual (WSM) Section 303-01 > Engine to Transmission Spacer Plate for full spacer plate removal and installation. When reinstalling the starter motor, make sure the starter is flush with the engine to transmission spacer plate prior to tightening the studbolts. Failure to do so may result in damaging the newly installed engine to transmission spacer plate.
TSB 25-22462025-06-10. Service bulletin. POWER TRAIN. This article supersedes TSB 25-2165 to update the labor operation allowance and update the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450 stored in the powertrain control module (PCM). This may be due to the software level of the PCM.
TSB 25-22362025-06-10. Service bulletin. POWER TRAIN. This article supersedes TSB 25-2155 to add labor time for F-150 Lightning. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * "Active Air Dam System Fault See Manual" warning message in the instrument panel cluster (IPC) * Diagnostic trouble code (DTC) C0604:00 stored in the PCM This may be due to the software level in the powertrain control module (PCM).
TSB 25-22332025-06-02. Service bulletin. POWER TRAIN. This article supersedes TSB 24-2124 to change the labor operation from actual time to fixed time. Some of the vehicles listed in the Model statement above may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0420 and/or P0430 stored in the powertrain control module (PCM). This may be due to calibration and controls sensitivity.
TSB 25-22292025-06-02. Service bulletin. POWER TRAIN. This article supersedes TSB 23-2429 to change the labor operation from actual time to fixed time. Some vehicles listed in the Model statement above may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P084B stored in the powertrain control module (PCM). This may be due to the software level of the PCM. To correct this condition, perform the Service Procedure below to reprogram the PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).
SSM 537642025-05-21. Service bulletin. POWER TRAIN; ENGINE. Some 2020 Continental, 2020-2024 Edge/Nautilus, 2020-2025 Explorer/Aviator/Escape/Corsair/F-150/F-Super Duty/Ranger/Transit/E-Series, 2021-2025 Bronco, and 2022-2025 Maverick vehicles may require an engine cooling system flush to be performed for various concerns. Workshop Manual (WSM), Section 303-03 has been updated to eliminate the need to remove and install the radiator assembly to perform a radiator flush.
TSB 25-21652025-05-14. Service bulletin. POWER TRAIN. Some of the vehicles listed in the Model statement above may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2450 stored in the powertrain control module (PCM). This may be due to the software level of the PCM.
TSB 24-22542024-09-02. Service bulletin. POWER TRAIN. Some 2020-2022 Explorer, 2020-2023 Transit, 2021-2022 F-150, 2021-2022 Mustang and 2022 Expedition/Navigator vehicles equipped with a 10R80 transmission (excluding hybrid) may exhibit harsh/delayed engagements and/or harsh/delayed shifts, an illuminated MIL with DTC P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the PCM or TCM. This may be due to axial movement of the CDF clutch cylinder (7H351) sleeve causing hydraulic circuit leaks. To correct the condition, follow the Service Procedure to verify hydraulic circuit leakage and replace the CDF clutch cylinder (7H351) if necessary.
TSB 24-22532024-09-02. Service bulletin. POWER TRAIN. Some 2021-2024 F-150 non-Lightning vehicles may exhibit a condition where the SelectShift®/SelectShift transmission will downshift to a lower gear when in drive (D) and shifting to a higher gear will be unavailable in the IPC. Downshifting may continue, when safe entry conditions are met for each gear, and the IPC display will show the available gears counting down one by one as the vehicles' speed and engine rpm decreases. This may be due to a chafed wire harness in the SelectShift® +/- circuit. To correct the condition, follow the Service Procedure to repair the circuit.
TSB 24-22522024-09-02. Service bulletin. POWER TRAIN. Some 2020-2023 Explorer/Aviator and 2021-2023 F-150 vehicles equipped with a 10R80 MHT transmission may exhibit harsh/delayed engagements and/or harsh/delayed shifts, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
TSB 24-21892024-07-01. Service bulletin. POWER TRAIN. Some 2021-2024 F-150 non-Raptor vehicles equipped with 4WD and ESOF transfer case (minor feature code FMLAS) may exhibit an intermittent grinding/hum/rumble noise from the front wheel area while in 2WD that goes away when the vehicle is put into 4WD. These vehicles will also have no diagnostic trouble codes (DTCs) stored in the transfer case control module (TCCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This may be due to incomplete disengagement of the integrated wheel end (IWE) actuator assemblies. To correct this condition, follow the Service Procedure to replace IWE actuator assemblies
SSM 526102024-06-11. Service bulletin. POWER TRAIN. Some 2021-2024 F-150 and 2023-2024 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit a rattle/scraping noise from the bellhousing area on start-up. This may be due to the torque converter studs contacting the engine-to-transmission spacer plate (separator plate). To correct this condition, remove the transmission and flexplate and inspect the engine-to-transmission spacer plate and torque converter studs for wear/damage. If wear/damage is found, replace the engine-to-transmission spacer plate. Refer to Workshop Manual (WSM) Section 303-01 Engine - 3.5L EcoBoost (BM), Removal and Installation, Crankshaft Rear Seal. When reinstalling the starter motor, make sure the starter is flush with the engine-to-transmission spacer plate prior to tightening the studbolts. Failure to do so may result in damaging the newly installed engine-to-transmission spacer plate.
SSM 525482024-05-23. Service bulletin. POWER TRAIN. Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
SSM 525282024-05-22. Service bulletin. UNKNOWN OR OTHER; POWER TRAIN. Some 2022-2023 F-150 Lightning vehicles may require module reprogramming in the Ford Diagnosis and Repair System (FDRS) scan tool to certain powertrain modules (powertrain control module (PCM), battery energy control module (BECM), anti-lock brake system (ABS) module, secondary on-board diagnostic control module C (SOBDMC), secondary on-board diagnostic control module A (SOBDM), secondary on-board diagnostic control module B (SOBDMB) and generic function module 2 (GFM2)). Module reprogramming in the FDRS has been temporarily suspended for these powertrain modules. A solution for this condition is expected in June 2024. Monitor Professional Technician System (PTS), OASIS, and FSA landing pages for additional information and schedule service appointments for customers once the repair becomes available.
TSB 24-21242024-05-04. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This article supersedes TSB 23-2425 to address revised software and update the Parts List. Some 2022-2023 F-150 hybrid vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0420 and/or P0430 stored in the powertrain control module (PCM). This may be due to calibration and controls sensitivity. To correct the condition, follow the Service Procedure to reprogram the PCM and perform the catalyst stabilization drive cycle.
TSB 24-21002024-04-04. Service bulletin. POWER TRAIN. This article supersedes TSB 24-2059 to update the Service Procedure LTIS statement. Some 2021-2022 F-150, 2022-2023 Expedition/Navigator/Mustang and 2020-2023 Transit/Explorer/Aviator vehicles equipped with a 10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) that are stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
TSB 24-20972024-04-04. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM.
TSB 24-20592024-04-04. Service bulletin. POWER TRAIN. This article supersedes TSB 23-2351 to remove 2023 F-150 10R80 and 10R80 MHT vehicle applications. The 2023 F-150 10R80 and 10R80 MHT vehicles will be the subject of a separate article. Some 2021-2022 F-150, 2022-2023 Expedition/Navigator/Mustang and 2020-2023 Transit/Explorer/Aviator vehicles equipped with a 10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes that are stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
SSM 523712024-04-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2022 F-150 non-Lightning vehicles may exhibit an illuminated powertrain malfunction (wrench) indicator and Service Vehicle Soon message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U031D in the powertrain control module (PCM) and no other drivability concerns. This may be due to the configuration of the PCM. To correct this condition, run the PCM - Disable Pro Trailer Hitch Assist application using the latest software level of the Ford Diagnosis and Repair System (FDRS) scan tool.
SSM 523492024-04-04. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN:MANUAL TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2023 F-150 vehicles may exhibit DTC C0604:00 stored in the powertrain control module (PCM) and may have an Active Air Dam System Fault See Manual message displayed in the instrument panel cluster (IPC). To correct this condition, clear and retest for the DTC C0604:00. If DTC C0604:00 returns, refer to Workshop Manual (WSM) Section 501-19 Bumpers, Diagnosis and Testing for additional diagnosis.
SSM 523142024-03-20. Service bulletin. POWER TRAIN. During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
SSM 522952024-03-05. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Some 2021-2023 F-150 and 2023-2024 Expedition/Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit a rattle/scraping noise from the bellhousing area on start-up. This may be due to the torque converter studs contacting the engine-to-transmission spacer plate (separator plate). To correct this condition, remove the transmission and flexplate and inspect the engine-to-transmission spacer plate and torque converter studs for wear/damage. If wear/damage is found, replace engine-to-transmission spacer plate. Refer to Workshop Manual (WSM) Section 303-01 Engine - 3.5L EcoBoost (BM), Removal and Installation, Crankshaft Rear Seal. When reinstalling the starter motor, be sure the starter is flush with the engine-to-transmission spacer plate prior to tightening the studbolts. Failure to do so may result in damaging newly installed engine-to-transmission spacer plate.
SSM 522442024-02-14. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost hybrid engine, 2020-2023 Explorer vehicles equipped with a 3.3L hybrid engine and 2020-2023 Aviator vehicles equipped with a 3.0L hybrid engine may exhibit a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM) and auto start/stop disabled. This may be due to a loose wiring connection to the belt integrated starter generator (BISG). The Workshop Manual (WSM) has recently been updated to provide new direction for DTC P0A1E. Refer to the WSM, Section 303-06 Starting System, Diagnosis and Testing, Starting System for applicable diagnosis.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.