WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

594 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
TSB 25-25122025-10-28. Service bulletin. LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM. This article supersedes TSB 25-2104 to update the labor times associated with the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: * Inoperative BlueCruise and lane centering * DTC U2018:51 stored in the camera module - rear (CMR) * DTC U0565:86 stored in the image processing module A (IPMA) * DTC U3000:49 is not stored in the CMR This may be due to the software in the CMR.
SSM 542842025-10-14. Service bulletin. ELECTRICAL SYSTEM. Some 2025 F-150 Tremor and Raptor vehicles may be equipped with auxiliary/upfitter switches that do not have rubber tips. Switches no longer equipped with rubber tips is an appearance only change and has no impact on function or performance. Repair or replacement for auxiliary/upfitter switches no longer equipped with rubber tips should not be performed and is not warrantable.
TSB 25-24482025-09-23. Service bulletin. VISIBILITY/WIPER; ELECTRICAL SYSTEM. This article supersedes TSB 25-2201 to update the vehicles affected. Some of the vehicles listed in the Model statement above equipped with one-touch up/down front windows may exhibit a window not responding to one-touch controls, not opening all the way and/or bouncing back when using the one-touch close function. This may be due to a calibration parameter in the driver door module (DDM) and/or passenger door module (PDM).
TSB 25-24462025-09-23. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This article supersedes TSB 23-2316 to update the Service Procedure and labor operations from M-Time to AP-Time and add a limit. Some of the vehicles listed in the Model statement above, may exhibit an illuminated powertrain temperature warning lamp accompanied by a "Motor Coolant Over Temperature" message in the instrument panel cluster (IPC) with DTC P0A3C:94 stored in either the secondary on-board diagnostic control module B (SOBDMB) and/or the secondary on-board diagnostic control module C (SOBDMC). This may be due to the software within either the SOBDMB and/or SOBDMC.
SYNC-25.2.1.6.5 F-1502025-09-04. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. "Quality improvements include: -Latest software update for BlueCruise Activation -Introduction of toggles in the center screen for driver assist features -Improved audio experience while using CarPlay or Android Auto"
TSB 25-24132025-09-03. Service bulletin. POWER TRAIN; VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM. This article supersedes TSB 24-2253 to update the labor times associated with the Service Procedure from M-time to AP-time and add a limit. Some of the vehicles listed in the Model Statement above, may exhibit a condition where the SelectShift®/SelectShift transmission will downshift to a lower gear when in drive (D) and shifting to a higher gear will be unavailable in the IPC. Downshifting may continue, when safe entry conditions are met for each gear, and the IPC display will show the available gears counting down one by one as the vehicles' speed and engine rpm decreases. This may be due to a chafed wire harness in the SelectShift® +/- circuit.
TSB 25-23992025-09-03. Service bulletin. ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM; ENGINE. This article supersedes TSB 23-2412 to update the labor times from M-time to AP-time and add a limit. Some of the vehicles listed in the Model statement above may exhibit an illuminated engine coolant temperature warning lamp with a "Motor Coolant Over Temperature" message in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) P0A2F:94 stored in the secondary on-board diagnostic control module C (SOBDMC). This may be due to the software level of the SOBDMC.
TSB 25-23552025-09-03. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This article supersedes TSB 23-2407 to update the Service Procedure and the labor operations from M-time to AP-time and add a limit. Some of the vehicles listed in the Model Statement above, may exhibit a "Pro Power Onboard Unavailable" message in the vehicle center display screen with diagnostic trouble Code (DTC) B15DA:09 in the Body Control Module (BCM). This may be due to the software level of the BCM and powertrain control module (PCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS).
SYNC-25.2.1.6.5 F-150 BEV2025-08-22. Over-the-air update. VISIBILITY/WIPER; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. "Quality improvements include: -Latest software update for BlueCruise Activation -Introduction of toggles in the center screen for driver assist features -Improved audio experience while using CarPlay or Android Auto -Walk away lock introduced in the vehicle"
SSM 541402025-08-19. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2024 F-150 vehicles equipped with a B&O audio system (minor feature code IDBBQ), and various 2021-2024 Ford and Lincoln vehicles equipped with a B&O audio system may exhibit a pop noise and/or static in the speakers at start up that cannot be turned down or off using the audio system controls. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner on Professional Technician System (PTS). This may be due to software in the digital signal processing (DSP) module. To correct this condition, reprogram the DSP module to the latest software level using the Ford Diagnosis and Repair System (FDRS) scan tool. For claiming, use causal part 18B849 and labor operations 12651D and 12651D4.
TSB 25-23022025-08-19. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This article supersedes TSB 24-2252 to update the Title, Action Statement, Service Procedure and Part List. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: Harsh engagement Delayed engagement Harsh shift Delayed shift Illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC)s P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to axial movement of the CDF clutch cylinder sleeve causing hydraulic circuit leaks. NOTE: If internal transmission service is required to address a concern detected with the CDF clutch cylinder following this article, technicians should carefully inspect and replace other transmission components and flush transmission fluid cooler only as necessary as needed to ensure proper function. Add a new line to the repair order to docum
TSB 25-23002025-08-19. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This bulletin supersedes TSB 25-2131 to add reprogram for later level software, new Steps 1-4 in Service Procedure. Updated Part List with 3 superseded part numbers. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: * Harsh engagement * Delayed engagement * Harsh shift * Delayed shift * Illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to PCM software and/or axial movement of the CDF clutch cylinder (7H351) sleeve causing hydraulic circuit leaks. NOTE: If internal transmission service is required to address a concern detected with the CDF clutch cylinder following this article, technicians should carefully inspect, replace other transmission components and flush transmission fluid cooler only as necessary
SSM 540902025-08-04. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2025 Ford and Lincoln vehicles equipped with SYNC4/Digital Experience may exhibit an unsuccessful telematics control unit module (TCU) software update or software activation during a universal serial bus (USB) update. This may be due to the vehicle connectivity setting being disabled.
25H022025-08-02. Other. ELECTRICAL SYSTEM. Certain 2022-2024 Model Year F-150 Lightning BEV Vehicles High Voltage Battery (HVB) Module/Array Replacement - Harvest Program
TSB 25-23422025-07-30. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This article supersedes TSB 23-2195 to update the labor times from M-time to fixed time. Some of the vehicles listed in the Model statement above may exhibit an illuminated MIL in the instrument panel cluster (IPC) with DTC P0171 stored in the powertrain control module (PCM). This may be due to the software level of the PCM.
TSB 25-23242025-07-25. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. This article supersedes TSB 25-2276 to update the service procedure to include information where to find connector/pin location in wiring diagram and WSM info to perform PMI and TRON for GSM replacement. Some of the vehicles listed in the Model statement above equipped with a console gear shift module (GSM) may exhibit at least one of the following conditions: * Clicking sound coming from shifter after it is placed and kept in reverse, neutral or drive position (2024 only) * Shifter will not shift out of park/into park * Shifter will not shift out of gear * Shifter will not stow/unstow * Shifter will move past the park position * Loose shifter lever arm at pivot * Illuminated powertrain malfunction (wrench) indicator with active DTC P0929:77, P0929:00, P0929:07 and/or P0929:9A stored in the GSM This may be due to a faulty GSM and/or connector C211 pin push out on circuit CCB61 or an open on circuit CCB61, between the anti-lock brake system (ABS) module and the body control module (BCM). Note: If the gear shifter lever will not shift into park, the transmission will automatically shift in
TSB 25-23202025-07-24. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM. This article supersedes TSB 23-2364 to update the labor times associated with the Service Procedure from M-time to AP-time. Some of the vehicles listed in the Model Statement above, may DTC P2101 stored in the powertrain control module (PCM). This may be due to the software in the PCM.
SYNC-25.2.1.6.5 F-1502025-07-03. Over-the-air update. FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: WARNING; LANE DEPARTURE: ASSIST; ELECTRICAL SYSTEM. Quality improvements include: -Improved CarPlay experience -BlueCruise enhancements
TSB 25-22732025-06-24. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. This article supersedes TSB 24-2443 to update the vehicles affected. Some of the vehicles listed in the Model statement above equipped with the 400-watt direct current/alternating current (DC/AC) inverter system (minor feature code HUKAJ) with a pickup bed alternating current (AC) power outlet socket may exhibit inoperative power outlets with diagnostic trouble code (DTC) B1330:9A stored in the body control module (BCM). This may be due to a connection issue at C4628. NOTE: This article does not apply to vehicles with an inverter system other than the 400-watt DC/AC inverter system with a pickup bed AC power outlet socket.
SSM 539662025-06-24. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2025 Ford/ Lincoln vehicles equipped with SYNC4 may not be able to perform an update to the accessory protocol interface module (APIM). This may be due to the software in the APIM. Ford Engineering has de-activated the ability to update these SYNC4 APIM modules as applicable, and the Ford Diagnosis and Repair System (FDRS) will not present an update for the APIM module. Some existing directed repairs may be impacted, check Professional Technician System (PTS) before attempting any specific technical service bulletin (TSB)/special service message (SSM) and check field service action (FSA) landing pages before attempting any FSA repairs. For any vehicle repairs requiring a software update that includes an APIM update in the programming sequence, if the 5-digit product code for the APIM software is equal to or lower than 23187, do not attempt to update affected modules at this time. To determine the 5-digit product code for the APIM software on the vehicle, while the vehicle center display screen is powered up with ignition in run or accessory, go to Settings > General > About SYNC.
25-SYNC-25.2.1.6.5 F-150L2025-06-05. Over-the-air update. UNKNOWN OR OTHER; ELECTRICAL SYSTEM. "Quality improvements include: -Improved CarPlay experience -Improved keyless entry experience"
SSM 526072024-06-10. Service bulletin. ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021-2024 F-150 non-Lightning vehicles may exhibit turn signal indicators on the instrument panel cluster (IPC) flashing fast when activated after running the IPC - Towbar Configuration application using the Ford Diagnosis and Repair System (FDRS) scan tool without any exterior turn signals being inoperative. The exterior turn signals will function normally. The IPC - Towbar Configuration application has recently been updated to correct this issue. To correct this condition, download and rerun the latest version of the IPC - Towbar Configuration application using the latest software level of the FDRS scan tool.
SSM 525432024-05-23. Service bulletin. ELECTRICAL SYSTEM. Some 2021-2024 F-150-3.5L FHEV, 2020-2024 Explorer 3.3L FHEV, 2020-2024 Escape 2.5L FHEV, and 2022-2024 Maverick 2.5L FHEV vehicles may exhibit an illuminated MIL with DTC P237F and/or P2C23 stored in the powertrain control module (PCM) and no affect on drivability. This may be due to seal damage, corrosion and/or water intrusion in the exhaust coolant temperature (ECT) sensors 3 and/or 4 connector. Visual inspection should be completed on ECT3 and ECT4 sensors and mating connections for seal damage, water intrusion, and corrosion. If seal damage, water intrusion or corrosion is present, repair per cell 5 of the Wiring Diagram, then apply Motorcraft® XG-12 Electrical Grease to the female/vehicle side of the harness. This inspection of ECT3 and ECT4 sensors should be completed prior to starting the appropriate pinpoint test in Section 303-03 of the Workshop Manual (WSM). If DTCs P237F and/or P2C23 do not return, no further action is necessary and the replacement of the entire exhaust heat exchanger assembly is not required. If P237F and/or P2C23 returns, follow the pinpoint test in Section 303-03 of the WSM for further diagnostics.
SSM 525262024-05-22. Service bulletin. ELECTRICAL SYSTEM. Some 2022-2023 F-150 Lightning vehicles that require replacement of an HV battery module may require installation of a thermal blanket. The following articles have been updated to assist in accuracy and improved part ordering:<br /> Parts Catalog: When ordering an HV battery module, a note will be present in the catalog if the VIN requires a thermal blanket.<br /> Dealer Communication (eFC) (USA Only): The correlating eFC on FMC Dealer for Lightning High Voltage Battery Array Kits has been corrected to advise proper part numbers and when to include a thermal blanket in the part order.<br /> Part Instruction Sheet: The instruction sheet included with the HV battery module has been updated to show thermal blanket part numbers and installation instructions.
SSM 525082024-05-17. Service bulletin. ELECTRICAL SYSTEM. 2022-2023 F-150 Lightning vehicles require installation of a cold plate when replacing a HV battery module. Workshop Manual (WSM) Section 414-03A, removal and installation, has been updated with improved diagnostics and direction for HV battery module replacement. If the parts catalog note states that a cold plate must also be ordered for the HV battery module(s) that are needing replaced, the called out corelating cold plate is required for repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.