WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Ford Explorer

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

189 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
IPMA-26.22.8.3.7 Expl&Avi2026-09-14. Over-the-air update. FORWARD COLLISION AVOIDANCE: WARNINGS; ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION; LANE DEPARTURE: ASSIST; BACK OVER PREVENTION: WARNINGS; UNKNOWN OR OTHER. 26S21 Recall remedy Infotainment system update to prevent rearview camera image interruptions
TSB 25-24222025-09-19. Other. UNKNOWN OR OTHER; LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS; FORWARD COLLISION AVOIDANCE: WARNINGS. This article supersedes TSB 25-2372 to update the vehicle symptoms.
SSM 538632025-06-11. Service bulletin. BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; VISIBILITY/WIPER; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. Some 2025 Explorer/Aviator vehicles may exhibit driver assistance feature warning messages displayed in the instrument panel cluster (IPC). Additionally, some modules may store invalid data/lost communication diagnostic trouble codes (DTCs). The image processing module A (IPMA) should not store these DTCs. This condition may be due to the software in the IPMA causing no communication on the network. To restore communication/function, download and run the "IPMA - Image Processing Module A (IPMA) Recovery" app in the Ford Diagnosis and Repair System (FDRS) tool, then "Trusted Real-Time Operation Network (TRON) Module Authentication" following FDRS screen instructions. Next, download and run the "IPMA - Image Processing Module A (IPMA) Alignment" app, recheck DTCs and confirm that all warning messages are cleared from the IPC. For vehicles equipped with a 360 degree camera, perform the "360 Degree View Camera Alignment" procedure in Workshop Manual (WSM), Section 413-13. If these steps correct the condition, release the vehicle back to the customer.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.