WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Ford Expedition

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

202 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
SSM 547202026-04-10. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE: BLIND SPOT DETECTION. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
SSM 544472026-01-06. Service bulletin. UNKNOWN OR OTHER; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM. Some 2022-2024 Expedition/Navigator vehicles equipped with minor feature codes DBCBB or DBCBC may exhibit various driver assistance feature warning messages displayed in the instrument panel cluster (IPC). Additionally, some modules may store diagnostic trouble codes (DTCs) related to invalid data or lost communication. This condition may be due to the software in the image processing module A (IPMA), disrupting network communication. If the IPMA is currently failing to communicate, download and run the "IPMA - Image Processing Module A (IPMA) Recovery" app in the Ford Diagnosis and Repair System (FDRS) scan tool. Select and run the IPMA Recovery Flash Erase option from the apps menu. If the driver assistance warnings and/or symptoms are intermittent, and possibly not failing during the dealership visit, download and run the "IPMA - Image Processing Module A (IPMA) Recovery" app in the FDRS scan tool. Select and run the GWM Ethernet Update option from the apps menu. If IPMA communication had to be restored using the Recovery App, download and run the "IPMA - Image Processing Module (IPMA) Alignm
SSM 543132025-10-28. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. Some 2020-2025 various Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
TSB 25-25122025-10-28. Service bulletin. LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM. This article supersedes TSB 25-2104 to update the labor times associated with the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: * Inoperative BlueCruise and lane centering * DTC U2018:51 stored in the camera module - rear (CMR) * DTC U0565:86 stored in the image processing module A (IPMA) * DTC U3000:49 is not stored in the CMR This may be due to the software in the CMR.
SSM 538932025-06-19. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE: ASSIST; VEHICLE SPEED CONTROL; UNKNOWN OR OTHER. Some 2022-2024 Expedition vehicles equipped with driver assistance features and minor feature codes DBCBB and DBCBC may exhibit driver assistance feature warning messages displayed in the instrument panel cluster (IPC). Additionally, some modules may store invalid data/lost communication related diagnostic trouble codes (DTCs). The image processing module A (IPMA) should not store these DTCs. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This condition may be due to the software in the IPMA, causing it to not communicate on the network. To restore communication and functionality, download and run the "IPMA - Image Processing Module A (IPMA) Recovery" app in the Ford Diagnosis and Repair System (FDRS) scan tool. Once IPMA communication has been restored, download and run the "IPMA - Image Processing Module (IPMA) Alignment" app, recheck DTCs and confirm that all warning messages are cleared from the IPC.
SSM 537602025-05-14. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION; FORWARD COLLISION AVOIDANCE: WARNINGS; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: WARNING. Some 2023-2024 Escape/Corsair vehicles equipped with driver assistance features with minor feature code DBCAB for Escape and minor feature code DBCBC for Corsair and 2022-2024 Expedition vehicles equipped with driver assistance features with minor feature codes DBCBB and DBCBC may exhibit driver assistance feature warning messages displayed in the IPC. Additionally, some modules may store invalid data/lost communication related DTCs. The image processing module A (IPMA) should not store these DTCs. To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). This condition may be due to the software in the IPMA, causing it to not communicate on the network. To restore communication and functionality, download and run the "IPMA - Image Processing Module A (IPMA) Recovery" app in the Ford Diagnosis and Repair System (FDRS) scan tool. Once IPMA communication has been restored, download and run the "IPMA - Image Processing Module (IPMA) Alignment"
TSB 24-22512024-09-02. Service bulletin. LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This article supersedes TSB 24-2087 to update the vehicle lines, model years affected, action and service procedure. Some 2021-2024 Mustang Mach-E/F-150, 2022-2024 F-150 Lightning/Expedition/Navigator, 2023-2024 Corsair vehicles may exhibit an inoperative BlueCruise and lane centering with DTCs U2018:51 stored in the camera module - rear (CMR) and U0565:86 stored in the image processing module A (IPMA) without DTC U3000:49 stored in the CMR. This may be due to the software level of the CMR. To correct the condition, follow the Service Procedure to reprogram the CMR module using the latest software level of the Ford Diagnosis and Repair System (FDRS).
SSM 521342023-12-19. Service bulletin. BACK OVER PREVENTION. Various 2021-2024 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit a Please Check Surroundings For Safety or Full View Not Available message when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition.
SSM 520442023-11-15. Service bulletin. SEATS; BACK OVER PREVENTION:SOFTWARE. Some 2022-2023 Expedition vehicles, built on or before 31-Aug-2023, may exhibit an inoperative approach detection or power door unlock command power running board extended deployment auto timer feature (delayed for 300 seconds without opening the door) when Extended is selected in the center display screen for the power running board AUTO mode. This may be due to various software parameters in the driver front seat module (DSM). To correct the condition, download and run the Driver Front Seat Module (DSM) Configuration app using the latest level of the Ford Diagnosis and Repair System (FDRS). For claiming use causal part number 14C708 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual.
SU5P1 Expedition2023-09-07. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Software Update 5 P1 for 2022-2023 Expedition Vehicles is now available. Quality improvements include: -Enables rear screen mirroring via vehicle wifi hotspot -Minimize time customer cannot enter the vehicle during future inhibit updates.
SU4P3 Expedition2023-09-07. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Software Update 4 P3 for 2022 Expedition Vehicles is now available. Quality improvements include: -Various Apple Carplay quality improvements
SSM 517762023-07-12. Service bulletin. EQUIPMENT; BACK OVER PREVENTION: CAMERA SYSTEM. Some 2021-2023 Mustang Mach-E/F-150, 2022-2023 Expedition/Navigator and 2023 Corsair vehicles may exhibit a Driver Monitoring Camera Blocked message and/or DTCs B115E:97, B15E1:97 and/or B15E2:97 stored in the driver status monitor camera module (CMR). These DTCs should be disregarded unless it is a DTC with a status byte 8F. Other status bytes should be disregarded as they may be caused by a camera obstruction such as driver position, aftermarket devices or dust on the camera. To clear the DTCs, remove anything obstructing the view of the camera and light emitting diodes (LEDs), place the steering wheel in the center position and close the driver door. Connect Ford Diagnosis and Repair System (FDRS) and clear the DTCs. Turn the ignition off and wait 10 seconds. Turn the ignition on and wait 1 minute. Perform the CMR self-test and reevaluate if DTCs persist.
SSM 514072023-04-04. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2021-2022 Ford and Lincoln vehicles equipped with SYNC 4 may experience an error message during the gateway module (GWM) software update application which states Procedure Unsuccessful- GetConfigDataFromGIVIS. This may be the result of a server related concern. To correct the condition, download and run the Ford Diagnosis and Repair System (FDRS) application GWM-Read the Gateway Module A (GWM) Configuration Data application. When the application completes, refresh and re-attempt the GWM-Gateway Module A (GWM) Software Update application. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
22OTA22PU1010MIL2023-01-07. Service bulletin. SERVICE BRAKES; BACK OVER PREVENTION:SOFTWARE. Priority Update 22-PU1010-MIL-LT for 2022 Expedition and Navigator vehicles is now available. Quality improvements include: -Electronic Brake Boost (EBB) interaction enhancement durring neutral tow operation. -Robustness change to brake fluid viscosity algorithm for low temperature compensation to prevent false DTC activation.
SSM 512622023-01-06. Service bulletin. EQUIPMENT:ELECTRICAL; BACK OVER PREVENTION:SOFTWARE. Some 2022 Expedition/Navigator vehicles may experience rear seat entertainment screens staying on with possible battery drain. This may be due to Amazon entertainment system software. An over-the-air (OTA) software update was launched by Amazon on 14-Oct-2022 to remedy this concern. This update will not show in the Ford OTA Dashboard since the rear seat entertainment system is a stand-alone feature. If the screens are frozen, remove fuse F24 in the body control module (BCM) for two minutes and reinstall, the screens should power back on. For the Amazon OTA update to occur, vehicle power needs to be turned on, touch each display, select Settings > Network > Turn On Wi-Fi. Customer will need to connect to their Amazon account. The Amazon entertainment system software OTA update will happen automatically as soon as Amazon account is connected.
SSM 512432023-01-05. Service bulletin. BACK OVER PREVENTION:SOFTWARE; EQUIPMENT:ELECTRICAL. Some 2022 Expedition/Navigator vehicles may experience rear seat entertainment screens staying on with possible battery drain. This may be due to Amazon entertainment system software. An over-the-air (OTA) software update was launched by Amazon on 14-Oct-2022 to remedy this concern. This update will not show in the Ford OTA Dashboard since the rear seat entertainment system is a stand-alone feature. For the Amazon OTA update to occur, vehicle power needs to be turned on, touch each display, select Settings > Network > Turn On Wi-Fi. Customer will need to connect to their Amazon account. The Amazon entertainment system software OTA update will happen automatically as soon as Amazon account is connected.
SSM 511712022-11-29. Service bulletin. BACK OVER PREVENTION:SOFTWARE. Some 2021-2022 F-150 (non-Lightning and non-3.5L PowerBoost), 2022 Expedition/Navigator vehicles may exhibit an illuminated anti-lock brake system (ABS) indicator and stability-traction control indicator with diagnostic trouble code (DTC) C1013:09 stored in the ABS module. This may be due to ABS module software parameters. To correct the condition, update the ABS module to the latest software level using the appropriate scan tool. For claiming, use causal part 2005 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
SSM 508812022-06-30. Service bulletin. BACK OVER PREVENTION:SOFTWARE; STRUCTURE; EQUIPMENT. Some 2022 Expedition vehicles, built on or before 01-Jun-2022, may exhibit a concern with the right and/or left power running boards intermittently not stowing and/or deploying when not commanded. This may be due to various software parameters in the driver front seat module (DSM). To correct the condition, download and run the Driver Front Seat Module (DSM) Configuration app on the latest level of the Ford diagnostic scan tool. For claiming use causal part number 14C708 and applicable labor times from Section 10 of the Service Labor Times Standard (SLTS) Manual.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.