WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Ford Escape

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

226 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
21B68-S12022-02-24. Service bulletin. ENGINE AND ENGINE COOLING. In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor may cause the check engine light to illuminate with diagnostic codes P1A0C, P2282, or P0106 in the PCM (powertrain control module). These codes may lead to the PCM disabling the eninge and a "Stop Safely Now" message appearing in the instrument cluster.
SSM 504852022-02-16. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Some 2019-2022 Edge/Nautilus, 2020-2022 Escape/Corsair, and 2021-2022 Bronco Sport vehicles equipped with a 2.0L EcoBoost or 2.3L EcoBoost may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P02AB, P0243, P0299, P25B3, P25B4, P2AB7, P2AB8 and/or P2AB9. This may be due to an inoperative wastegate actuator, missing wastegate actuator e-clip or non-visible damage to the actuator rod. If the diagnostic procedures lead to replacement of the turbocharger assembly, note that a lower level service component has been released K2GZ-9G488-B for Edge/Nautilus/Escape/Corsair/Bronco Sport for service to replace the actuator, actuator rod and both e-clips instead of a complete turbocharger assembly. When replacing the wastegate actuator, it is required to replace all parts included in the service kit.
SSM 503822022-02-04. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020-2021 Escape and 2021 Bronco Sport vehicles equipped with 1.5L EcoBoost engines may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P3402. This may be due to the cylinder 1 deactivation solenoid. To correct this condition, replace the cylinder deactivation solenoid with service part number H6BZ-6H082-A. DTC P0299 may also be present. Diagnose P3402 first, then determine if DTC P0299 returns and follow normal Workshop Manual (WSM) procedures as necessary.
SSM 503382021-12-26. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Some 2020-2021 Escape and 2021 Bronco Sport vehicles equipped with a 1.5L EcoBoost engine may experience a lack of power, excessive spark knock and an illuminated malfunction indicator lamp (MIL) and/or a powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P130D stored in the powertrain control module (PCM). This concern typically occurs under moderate to high load conditions at highway speeds. This may be due to a loose ground at G109 or G107. To correct this condition, inspect G109 for the ground eyelet being installed upside down/loose/corrosion and G107 ignition coil ground. The eyelet on G109 has a tab that should be facing down to stop rotation during tightening.
SSM 503362021-12-26. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Some 2020-2021 Escape/Corsair and 2021 Bronco Sport vehicles may exhibit a communication fault with emissions inspection equipment. This may be due to the software in the gateway module. To correct this condition, reprogram the gateway module to latest software level using the appropriate Ford diagnostic scan tool. Use causal part 14F642 and applicable labor times from Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 503252021-12-26. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING; EQUIPMENT ADAPTIVE/MOBILITY. Some 2021 Escape/Corsair 2.5L PHEV vehicles may exhibit an illuminated MIL with DTCs P2183 and/or P26C1 present. The vehicle may also exhibit an engine overheat message in the instrument panel cluster. Engineering is aware of this concern and is working on a solution. Continue with checking the engine coolant level, inspect the cabin heater coolant temperature sensor (ECT sensor 2) connector for contamination and perform Workshop Manual (WSM), Section 412-00 pinpoint test AQ. If no concern is found and the vehicle does not exhibit DTC P1285 or P1299, clear the DTCs. If DTCs P1285 or P1299 are present, perform normal WSM diagnosis and repair. Inform customers that Ford is working on a resolution and that the vehicle is safe to drive. Monitor OASIS for updates. Once the solution becomes available, contact the customer and set up a service appointment.
SSM 503062021-12-07. Service bulletin. ENGINE AND ENGINE COOLING. Some 2018-2021 EcoSport, Expedition, Navigator; 2019-2021 Ranger; 2020-2021 Escape, Corsair, Explorer, Transit; 2021 Bronco, Bronco Sport, Edge, Nautilus, F-150, Mustang; 2019-2022 Transit Connect; 2020-2022 Aviator, F-Super Duty; and 2022 Maverick vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0496, P0456, P0455, P04F0, and/or P0451. Ford has tested returned EVAP canister purge valves and found them to be fully functional. Prior to replacing the canister purge valve or other EVAP components, perform the following tests using the Ford Diagnosis and Repair System (FDRS) Scan Tool: Full System EVAP Leak Test - FDRS Location: TOOLBOX > PCM > PCM - Evap Emissions System Test and the EVAP Purge Valve Leak Test - FDRS Location: TOOLBOX > PCM > Evap Emission System Toolbox > CPV Check.
SSM 501712021-10-29. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL. Some 2019-2021 Edge/Nautilus/Ranger, 2020-2021 Escape/Corsair/Explorer, and 2021 Bronco Sport vehicles equipped with a 2.0L/2.3L EcoBoost may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P02AB, P0243, P0299, P1464, P25B3, P25B4, P2AB7, P2AB8 and/or P2AB9. This may be due to an inoperative wastegate actuator, missing wastegate actuator e-clip or non-visible damage to the actuator rod. A lower level service component has been released, K2GZ-9G488-B for Edge/Nautilus/Escape/Corsair/Bronco Sport vehicles and LB5Z-9G488-B for Explorer/Ranger vehicles, for service to replace the actuator, actuator rod and both e-clips. When replacing the wastegate actuator, it is important to replace all parts in the service kit. Turbocharger replacement is not necessary to correct the condition.
SSM 501612021-10-01. Service bulletin. ENGINE AND ENGINE COOLING. Some 2021 Escape Hybrid vehicles built on 10-Aug-2021 through 20-Sep-21 may exhibit a front-end flutter/rattle noise at 65 mph (105 km/h) or higher. Engineering is aware of this concern and a repair procedure should be available late October. Using the Ford Diagnosis and Repair System (FDRS), command the active grill shudders open and closed to see if the flutter/rattle noise changes. If the flutter/rattle noise does not change, continue with normal Workshop Manual, Section 100-04 for diagnostic and repair information. If the flutter/rattle noise does change, advise the customer that the vehicle is safe to drive in the meantime. Schedule a follow-up appointment for late October and when the repair procedure becomes available, contact the customer to arrange repairs. Monitor OASIS for updates.
SSM 499302021-08-02. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Some 2020-2021 Escape and 2021 Bronco Sport vehicles equipped with the 1.5L engine may exhibit a lugging vibration and/or boom noise while driving in gears 5-8 at approximately 1500 engine revolutions per minute (RPM). This may be felt more when the engine is under a light to moderate load. A vibration and/or boom noise could be generated from the firing frequency of the 3 cylinders or when cylinder deactivation occurs and the engine is running on 2 cylinders. Compare to a like vehicle before attempting to diagnose as this condition may be characteristic. Setting the vehicle's drive mode to SPORT may eliminate the condition by changing the shift points of the transmission. Refer to the Owner's Manual for information on drive mode control and how to select them.
SSM 499242021-08-02. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. Some 2019 MKC, 2019-2021 Edge/Nautilus/Escape/Ranger/Explorer, 2020-2021 Corsair, and 2021 Bronco Sport vehicles equipped with 2.0L and 2.3L EcoBoost engines may exhibit a light to moderate ticking type noise at idle (600-700 RPM). The noise is usually more prominent in the area of the high-pressure fuel pump, located on the top of the engine just behind the number 4 ignition coil. This noise is not detrimental to engine function and has no short or long-term effects on engine durability. This an operating characteristic of these engines and no repairs should be attempted.
SSM 498212021-06-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE AND ENGINE COOLING. Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 497442021-05-03. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020-2021 Escape/2021 Bronco Sport vehicles equipped with a 1.5L engine may exhibit a low oil pressure warning with diagnostic trouble code (DTC) P0524. The Workshop Manual (WSM) Sections 303-14, 303-00, and 413-01 have been updated with new information to aid in diagnosis of the low oil pressure warning and DTC P0524.
SSM 496542021-03-31. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020-2021 Escape hybrid vehicles may experience an illuminated (MIL) and DTC P0106 and/or P2282 while operating at or below freezing and covering daily distances of about 60 miles (100 Km). Remove the throttle body per Workshop Manual (WSM) Section 303-04C and inspect the inside of the intake manifold for water/ice. If present, thaw the vehicle and remove liquid using a suction gun/large syringe and tubing. Swab the bottom of the intake by tying a shop towel to a rod to remove remaining liquid. Remove the manifold absolute pressure and temperature (MAPT) Sensor per WSM section 303-14C. Inspect/clean any ice or sludge build-up from MAPT sensor and reinstall. Inform the customer that this is an interim fix and that their vehicle is safe to drive. Schedule a follow-up appointment with the customer for May timeframe. Monitor OASIS in the 2nd quarter.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.