Service bulletin SSM 50338
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10205478 |
| Published by NHTSA | 2021-12-26 |
| Manufacturer's number | SSM 50338 |
| Manufacturer's date | 2021-12-10 |
| NHTSA component | ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM |
NHTSA's summary
Some 2020-2021 Escape and 2021 Bronco Sport vehicles equipped with a 1.5L EcoBoost engine may experience a lack of power, excessive spark knock and an illuminated malfunction indicator lamp (MIL) and/or a powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P130D stored in the powertrain control module (PCM). This concern typically occurs under moderate to high load conditions at highway speeds. This may be due to a loose ground at G109 or G107. To correct this condition, inspect G109 for the ground eyelet being installed upside down/loose/corrosion and G107 ignition coil ground. The eyelet on G109 has a tab that should be facing down to stop rotation during tightening.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Engine
Trouble codes named
P130D
| FORD BRONCO SPORT | 2021 |
|---|---|
| FORD ESCAPE | 2021 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2026072 | 2026-02-18. Engine |
|---|---|
| 2026005 | 2026-01-09. Electrical |
| 25V789000 | 2025-11-14. ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY |
| 2025554 | 2025-10-10. Electrical |
| 2025376 | 2025-07-14. Engine |
| 2025283 | 2025-05-23. Engine |
| 25V345000 | 2025-05-23. ENGINE |
| 2025139 | 2025-03-14. Electrical |
| 2025134 | 2025-03-14. Engine |
| 25V158000 | 2025-03-14. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| SSM 55149 | 2026-09-12. Service bulletin. Some 2021-2024 Bronco Sport vehicles equipped with a 1.5L may exhibit a lack of air conditioning (A/C) cooling while at a stop and idling in ambient temperatures of 100°F (38°C) or higher. In addition, there are no diagnostic trouble codes (DTC) present related to A/C system functionality, refrigerant charge levels are to specification and system is free of refrigerant leaks and/or A/C compressor related concerns. Customers may also report that A/C system cooling will be restored once the vehicle starts moving or placed in park/neutral.<br /><br /> This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and engineering is currently working on a solution for this condition that is expected in Q4 2026. Replacement or reprogramming of any components will not resolve this condition. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.<br /><br /> If the vehicle exhibit |
|---|---|
| 25M03 | 2026-09-01. Other. Customer Satisfaction Program 25M03 Certain 2020-2025 Model Year Escape, 2021-2025 Model Year Corsair and 2022- 2025 Model Year Maverick Vehicles equipped with a 2.5L Hybrid or Plug-In Hybrid engine - Exhaust Gas Recirculation (EGR) Differential Pressure Sensor Replacement, if Required After Dealer Evaluation |
| 26N15 | 2026-09-01. Other. Customer Satisfaction Program 26N15 Certain 2020-2026 Model Year Escape and 2021-2026 Model Year Corsair Plug-in Hybrid Electric Vehicles (PHEV) – High Voltage Battery Replacement |
| 26E04 | 2026-08-03. Emissions. NEW VEHICLE DELIVERY HOLD - Emissions Recall 26E04 Certain 2021-2025 Model Year F-150, Maverick, Mustang, Ranger, Expedition, Bronco Sport, Explorer, Bronco, Navigator, and Aviator Vehicles Powertrain Control Module Software Update |
| 25B51 | 2026-06-05. Other. Certain 2021-2024 Model Year Bronco, 2021-2024 Model Year Bronco Sport, 2020-2022 Model Year Corsair and Escape, 2016-2024 Model Year Explorer, 2019-2020 Model Year Fusion, 2016-2018 Model Year Focus RS, 2022-2024 Model Year Maverick, 2016-2019 Model Year MKC and 2019-2024 Model Year Ranger Vehicles Equipped with a 2.0L or 2.3L Engine and Engine Block Heater System Block Heater Replacement |
| SSM 54720 | 2026-04-10. Service bulletin. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern. |
| SSM 54631 | 2026-03-11. Service bulletin. Some 2020-2026 Escape and 2022-2026 Maverick 2.5L Duratec hybrid vehicles may require various repairs on the exhaust system. This may require removal of the exhaust heat exchanger. WSM, Section 309-00 Exhaust System > 2.5L Duratec hybrid > Removal and Installation > Exhaust Heat Exchanger has been revised to eliminate the need to remove the muffler assembly. The procedure steps and labor times have been updated to reflect this adjustment. |
| SSM 54589 | 2026-03-04. Other. Some 2019-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various connectivity concerns with The Ford App Lincoln App including but not limited to: missing activation prompt pop-upon the vehicle's center display screen when attempting to activate vehicle through The Ford App Lincoln App, incorrect location global positioning system GPS reported through The Ford App Lincoln App, problems with remote commands being performed through The Ford App Lincoln App and or incorrect data information reported on The Ford App Lincoln App. These symptoms will be accompanied by diagnostic trouble code DTC B156D 89 in the TCU. This may be due to the accessory protocol interface module APIM software. To correct the condition, update the APIM software. |
| SSM 54615 | 2026-03-04. Service bulletin. Some 2020-2026 Escape and 2021-2026 Corsair vehicles equipped with a 2.5L engine may exhibit a fuel door that won't open with diagnostic trouble code (DTC) P04CA stored in the powertrain control module (PCM). This may be due to an open circuit on circuit SBB05 and/or a damaged splice S133. Before performing the pinpoint test for P04CA in Workshop Manual (WSM), Section 310-00, inspect circuit SBB05 and splice S133 for damage such as an open circuit. Repair as necessary. Refer to Wiring Diagram, Cell 005. If no damage is found, refer to WSM, Section 310-00 for normal diagnostics. For claiming use causal 14290 and labor operations 12650D, 12650D45, and 12650D45WR. |
| SSM 54601 | 2026-02-27. Service bulletin. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k |