WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Ford Escape

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

291 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
SSM 503822022-02-04. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020-2021 Escape and 2021 Bronco Sport vehicles equipped with 1.5L EcoBoost engines may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P3402. This may be due to the cylinder 1 deactivation solenoid. To correct this condition, replace the cylinder deactivation solenoid with service part number H6BZ-6H082-A. DTC P0299 may also be present. Diagnose P3402 first, then determine if DTC P0299 returns and follow normal Workshop Manual (WSM) procedures as necessary.
SSM 503362021-12-26. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Some 2020-2021 Escape/Corsair and 2021 Bronco Sport vehicles may exhibit a communication fault with emissions inspection equipment. This may be due to the software in the gateway module. To correct this condition, reprogram the gateway module to latest software level using the appropriate Ford diagnostic scan tool. Use causal part 14F642 and applicable labor times from Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 503062021-12-07. Service bulletin. ENGINE AND ENGINE COOLING. Some 2018-2021 EcoSport, Expedition, Navigator; 2019-2021 Ranger; 2020-2021 Escape, Corsair, Explorer, Transit; 2021 Bronco, Bronco Sport, Edge, Nautilus, F-150, Mustang; 2019-2022 Transit Connect; 2020-2022 Aviator, F-Super Duty; and 2022 Maverick vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0496, P0456, P0455, P04F0, and/or P0451. Ford has tested returned EVAP canister purge valves and found them to be fully functional. Prior to replacing the canister purge valve or other EVAP components, perform the following tests using the Ford Diagnosis and Repair System (FDRS) Scan Tool: Full System EVAP Leak Test - FDRS Location: TOOLBOX > PCM > PCM - Evap Emissions System Test and the EVAP Purge Valve Leak Test - FDRS Location: TOOLBOX > PCM > Evap Emission System Toolbox > CPV Check.
SSM 501712021-10-29. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL. Some 2019-2021 Edge/Nautilus/Ranger, 2020-2021 Escape/Corsair/Explorer, and 2021 Bronco Sport vehicles equipped with a 2.0L/2.3L EcoBoost may exhibit a lack of power with an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P02AB, P0243, P0299, P1464, P25B3, P25B4, P2AB7, P2AB8 and/or P2AB9. This may be due to an inoperative wastegate actuator, missing wastegate actuator e-clip or non-visible damage to the actuator rod. A lower level service component has been released, K2GZ-9G488-B for Edge/Nautilus/Escape/Corsair/Bronco Sport vehicles and LB5Z-9G488-B for Explorer/Ranger vehicles, for service to replace the actuator, actuator rod and both e-clips. When replacing the wastegate actuator, it is important to replace all parts in the service kit. Turbocharger replacement is not necessary to correct the condition.
SSM 499302021-08-02. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. Some 2020-2021 Escape and 2021 Bronco Sport vehicles equipped with the 1.5L engine may exhibit a lugging vibration and/or boom noise while driving in gears 5-8 at approximately 1500 engine revolutions per minute (RPM). This may be felt more when the engine is under a light to moderate load. A vibration and/or boom noise could be generated from the firing frequency of the 3 cylinders or when cylinder deactivation occurs and the engine is running on 2 cylinders. Compare to a like vehicle before attempting to diagnose as this condition may be characteristic. Setting the vehicle's drive mode to SPORT may eliminate the condition by changing the shift points of the transmission. Refer to the Owner's Manual for information on drive mode control and how to select them.
SSM 499242021-08-02. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. Some 2019 MKC, 2019-2021 Edge/Nautilus/Escape/Ranger/Explorer, 2020-2021 Corsair, and 2021 Bronco Sport vehicles equipped with 2.0L and 2.3L EcoBoost engines may exhibit a light to moderate ticking type noise at idle (600-700 RPM). The noise is usually more prominent in the area of the high-pressure fuel pump, located on the top of the engine just behind the number 4 ignition coil. This noise is not detrimental to engine function and has no short or long-term effects on engine durability. This an operating characteristic of these engines and no repairs should be attempted.
SSM 498212021-06-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE AND ENGINE COOLING. Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
TSB 21-21202021-05-04. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020 Escape vehicles equipped with a 1.5L EcoBoost engine built on or Before 21-Jul-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). This may be due to various strategies within the PCM software. To correct the condition, follow the Service Procedure steps to replace the crankcase ventilation tube assembly and reprogram the PCM.
SSM 496542021-03-31. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020-2021 Escape hybrid vehicles may experience an illuminated (MIL) and DTC P0106 and/or P2282 while operating at or below freezing and covering daily distances of about 60 miles (100 Km). Remove the throttle body per Workshop Manual (WSM) Section 303-04C and inspect the inside of the intake manifold for water/ice. If present, thaw the vehicle and remove liquid using a suction gun/large syringe and tubing. Swab the bottom of the intake by tying a shop towel to a rod to remove remaining liquid. Remove the manifold absolute pressure and temperature (MAPT) Sensor per WSM section 303-14C. Inspect/clean any ice or sludge build-up from MAPT sensor and reinstall. Inform the customer that this is an interim fix and that their vehicle is safe to drive. Schedule a follow-up appointment with the customer for May timeframe. Monitor OASIS in the 2nd quarter.
TSB 21-20242021-02-04. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. This article supersedes TSB 21-2007 to update the Service Procedure. Some 2020 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). To correct the condition, follow the Service Procedure steps to replace the crankcase ventilation tube assembly and reprogram the PCM.
TSB 21-20072021-02-04. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Some 2020 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). To correct the condition, follow the Service Procedure steps to replace the crankcase ventilation tube assembly and reprogram the PCM.
SSM 493282020-12-04. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, OTHER:DELIVERY:FUEL PUMP; EQUIPMENT. Some 2019 MKC, 2019-2020 Edge/Nautilus/Escape/Ranger, 2020 Corsair, 2019-2021 Explorer vehicles equipped with 2.0L and 2.3L EcoBoost engines may exhibit a light to moderate ticking type noise at idle (600-700 RPM). The noise is usually more prominent in the area of the high-pressure fuel pump, located on the top of the engine just behind the number 4 ignition coil. This noise is not detrimental to engine function and has no short or long-term effects on engine durability. This an operating characteristic of these engines and no repairs should be attempted.
SSM 491632020-10-06. Service bulletin. EQUIPMENT; ENGINE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Some 2020 Escape and Explorer hybrid vehicles may experience discharge of the high voltage battery (HVB) with DTCs P0DE6 and P0A7D. This may be due to the vehicle not being operated for an extended length of time or from a crank/no-start condition. If the HVB is discharged, refer to the applicable GSB and Workshop Manual section to confirm if off-board charging is required. Note that the voltages in the GSB do not apply to 2020 Escape and Explorer. Using the appropriate Ford scan tool, monitor PID values: HVBAT_V on 2020 Escape (at least 90V, but less than 165V)and 2020 Explorer HVBAT_V (at least 114V, but less than 210V). For both vehicles, HEV_BAT_MIN_V should be greater than 1.45V, and HEV_BAT_VAR_V less than 2.5V. If the values are within limits and the HVB is suitable for a rescue charge, contact the Technical Assistance Center to request a high voltage charger.
SSM 491512020-10-06. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020 Ford Escape vehicles equipped with the 1.5L engine my exhibit a lugging vibration and/or boom noise while driving in gears 5-8 at approximately 1500 engine revolutions per minute (RPM). This may be felt more when the engine is under a light to moderate load. A vibration and/or boom noise could be generated from the firing frequency of the 3 cylinders or when cylinder deactivation occurs and the engine is running on 2 cylinders. Compare to a like vehicle before attempting to diagnose as this condition may be characteristic. Setting the vehicle's drive mode to SPORT may eliminate the condition by changing the shift points of the transmission. Refer to the Owner's Manual for information on drive mode control and how to select them.
TSB 20-22152020-10-02. Service bulletin. STRUCTURE; ENGINE AND ENGINE COOLING. Some 2020 Escape vehicles equipped with a 1.5L EcoBoost engine and built on or before 30-Nov-2019 may exhibit a vibration at idle. This may be due to the engine mounts. To correct the condition, follow the Service Procedure steps to replace the engine mounts and perform the engine mount neutralization procedure.
SSM 490852020-09-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; ENGINE. Some 2020 Ford and Lincoln vehicles equipped with a TCU may exhibit incomplete user authorization, no authorization pop-up on the SYNC infotainment system, vehicle connectivity concerns, vehicle location disabled message and/or various FordPass/LincolnWay App command/control concerns. To correct these conditions, ensure that customer connectivity settings (CCS) are turned on in the SYNC system. If the concerns persist after CCS is turned on, turn CCS OFF, perform an ignition cycle, and turn CCS settings back on. After any CCS changes, force-close and relaunch the FordPass/ LincolnWay app on the customers phone. Once CCS is turned on, program the TCU to the latest IDS/FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
20B14-S22020-06-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE; STEERING. Updated Technical Information for Power Steering Control Module (PSCM) reset after PCM reprogram. Unplugging the PSCM is no longer required as new FDRS service function is available. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTCs) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. SERVICE
20B14-S12020-06-05. Service bulletin. ENGINE; POWER TRAIN; ELECTRICAL SYSTEM. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now” message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTC’s) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque.
SSM 488482020-06-04. Service bulletin. ENGINE AND ENGINE COOLING. Some 2020 Escape vehicles built on or after 10-Jan-2020, equipped with a 1.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with only diagnostic trouble code (DTC) P04DB in the powertrain control module (PCM). If this DTC is retrieved with other DTCs, diagnose those first. Engineering data has confirmed that DTC P04DB is typically a green engine and/or low mileage concern that will not repeat if a crankcase ventilation system concern is not present. Inspect the crankcase ventilation tube at the rear air intake system connection for a partial disconnect. If the crankcase ventilation tube is not disconnected and no concern is identified after performing Powertrain Control and Emission Diagnosis (PC/ED) Manual pinpoint test HG, clear the DTC using the appropriate Ford scan tool and return the vehicle to the customer.
SSM 483452019-12-05. Service bulletin. ENGINE AND ENGINE COOLING. Some 2019-2020 Edge/Escape/Nautilus/Corsair vehicles equipped with 2.0L EcoBoost engines may exhibit low coolant, white smoke from the tailpipe, an over temperature warning in the instrument panel cluster (IPC), external coolant leaking, and/or illuminated MIL with DTCs P0217, P0401, P1026, P1285, P1299, P2196 or P2467 stored in the PCM. This may be due to an EGR Cooler that is leaking coolant into the engine intake and exhaust system. The EGR cooler should be inspected first to detect the presence of any internal leaks by a visual inspection and a pressure test as defined in the Workshop Manual (WSM). If any coolant is found leaking from the coolant chamber into the exhaust chamber, replace the EGR cooler. If no issues are detected with the EGR cooler, continue repair diagnosis using standard diagnostic procedures as defined in the WSM.
Continental_HPS_2019-10-28. Service bulletin. ENGINE; ELECTRICAL SYSTEM. A loss of electrical connection, which may result in loss of engine power.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.