Service bulletins for the 2020 Ford Escape
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
291 on file from NHTSA, as of 2026-10-19.
About P1A0C on the 2020 Ford Escape: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
Only bulletins with trouble code: P1A0C are shown. Show all
| 21B68-S1 | 2022-02-24. Service bulletin. ENGINE AND ENGINE COOLING. In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor may cause the check engine light to illuminate with diagnostic codes P1A0C, P2282, or P0106 in the PCM (powertrain control module). These codes may lead to the PCM disabling the eninge and a "Stop Safely Now" message appearing in the instrument cluster. |
|---|---|
| 21B68 | 2022-01-03. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Certain 2020-2021 Model Year Escape 2.5L HEV PHEV Vehicles Reprogram Powertrain Control Module (PCM) In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor may cause the check engine light to illuminate with diagnostic codes P1A0C, P2282, or P0106 in the PCM (powertrain control module). These codes may lead to the PCM disabling the engine and a Stop Safely Now message appearing in the instrument cluster |
| TSB 21-2122 | 2021-05-04. Service bulletin. ELECTRICAL SYSTEM. Some 2020-2021 Escape hybrid electric vehicles (HEV) built on or before 29-Mar-2021 may experience a lack of power, crank/no start, and Stop Safely Now message with diagnostic trouble codes (DTC) P2282, P0106 and/or P1A0C stored in the powertrain control module (PCM) in temperatures below 32’F/0’C. This may be due to various software parameters within the PCM and condensation buildup in the intake manifold. To correct the condition, follow the Service Procedure and reprogram the PCM. |
| TSB 21-2080 | 2021-04-03. Service bulletin. ELECTRICAL SYSTEM. Some 2020 Escape hybrid electric vehicles (HEV) built on or before 4-Dec-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1A0C stored in the powertrain control module (PCM) and exhibit a Stop Safely Now message in the instrument panel cluster (IPC). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM. |
| TSB 20-2365 | 2020-11-05. Service bulletin. POWER TRAIN. Some 2020 Escape Hybrid Electric Vehicles (HEV) built on or before 6-Oct-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1A0C stored in the powertrain control module (PCM) and exhibit a Stop Safely Now message in the instrument panel cluster (IPC). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM. |
| 20B14-S2 | 2020-06-05. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ENGINE; STEERING. Updated Technical Information for Power Steering Control Module (PSCM) reset after PCM reprogram. Unplugging the PSCM is no longer required as new FDRS service function is available. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTCs) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. SERVICE |
| 20B14-S1 | 2020-06-05. Service bulletin. ENGINE; POWER TRAIN; ELECTRICAL SYSTEM. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a “Stop Safely Now” message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTC’s) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. |
| 20B14 | 2020-05-05. Service bulletin. ELECTRICAL SYSTEM. In some of the affected vehicles, the customer may experience limited powertrain acceleration and speed along with a Stop Safely Now message and a check engine light displayed in the instrument cluster. Diagnostic Trouble Codes (DTCs) P0340 and P1A0C may be present in the Powertrain Control Module (PCM). This is due to crankshaft and camshaft signal quality during start up, resulting in incorrect synchronization and the inability of the engine to produce the requested torque. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.